• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1184-1186
• /
• 1995

The absorption spectra of synthesis of azobenzene containing long chain fatty acids were investigated by UV spectrophotometer in chloroform solution. Also, the pressure-area isotherms of the molecules on the water-air interface were obtained and the LB films were fabricated onto a quartz slides and quartz crystals by the conventional Langmuir-Blodggett(LB) method. The UV absorption spectra of Langmuir-Blodggett(LB) films on quartz slides have been measured. From these measurements, following conclusions were obtained. Azobenzene containing long chain fatty acids show a photoisomerization by irradiation of UV light and visible light alternatively. At the pressure-area isotherms, the value of surface pressure increment were decreased when the number of $C_n$ increased. Also the LB films show a photoisomerization characteristics. So the LB film of azobenzene containing long chain fatty acid has possibility to being applied to functional molecular device such as photomemory and light switching.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.870-877
• /
• 2005

This study examined a case of collapse and reinforcement of the colluvial deposit slope in Kyeongnam Geoje Area. The reason for the collapse was found first in the reduction of the resistant force due to slope-cut for constructing retaining walls. This decreased the resistant force against sliding, which enabled precipitation during the rainy period to seep into the ground in the upper colluvium, resulting in increase in porewater pressure. This leads to decreased shear strength and increased sliding force, which ultimately caused the collapse of the slope. For the long-term stability, methods attained for stability reinforcement are summarized in the following table.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.299-311
• /
• 2011

The objective of this paper is to present a methodology for the classification of spatial patterns considering the parameters of urban form which play a significant role in the formation of the urban climate. The urban morphological parameters, i.e. building coverage, impervious pavement, vegetation, water, farmland and landuse types were used to classify the spatial patterns by a K-means cluster analysis. And the presented methodology was applied on Changwon city, South Korea. According to the results of cluster analysis, the total spatial patterns were classified as 24 patterns. First of all, The spatial patterns(A-1, A-2, A-3, B-1, B-2, B-3, C-1, C-2, C-3, D-1, D-2, D-3, E-1, E-2, E-3, F-1, F-2, F-3, G-1, G-2, G-3), which distributed in the rural area and the suburban area, can have the positive impacts of cold air generation and wind corridor on an urban climate environment, were distributed in the rural area. On the other hand, the spatial patterns of the downtown area including A-4, B-4, C-4 and D-4 are expected to have the negative impacts on urban climate owing to the of artificial heat emission or the wind flow obstruction. Finally, it will require the future research to analysis the climatic properties according to the same spatial patterns by the field survey.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.1
• /
• pp.78-84
• /
• 2001

A CFD simulation of airflow and temperature field in a heated room has been described in this paper. The thermal wall jet created by a radiator greatly influences the airflow pattern, temperature distribution. The area close La a heat source has a higher risk of air-borne contamination and imposes a harmful effect on occupants in that area. The predicted flow field, temperature results show good agreement with the measured data. As the results were compared with experimental data, the applicability of CFD was satisfactorily verified. Also, the CFD simulation can capture the natural convective flow features. If a CFD simulation is applied ventilation design with a heat source, An effective design will be attained. Further study is required to improve the accuracy of CFD simulation.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1188-1198
• /
• 2015

In this paper, a multi-time programmable (MTP) cell based on a $0.18{\mu}m$ bipolar-CMOS-DMOS backbone process that can be written into by using dual pumping voltages - VPP (boosted voltage) and VNN (negative voltage) - is used to design MTP memories without high voltage devices. The used MTP cell consists of a control gate (CG) capacitor, a TG_SENSE transistor, and a select transistor. To reduce the MTP cell size, the tunnel gate (TG) oxide and sense transistor are merged into a single TG_SENSE transistor; only two p-wells are used - one for the TG_SENSE and sense transistors and the other for the CG capacitor; moreover, only one deep n-well is used for the 256-bit MTP cell array. In addition, a three-stage voltage level translator, a VNN charge pump, and a VNN precharge circuit are newly proposed to secure the reliability of 5 V devices. Also, a dual memory structure, which is separated into a designer memory area of $1row{\times}64columns$ and a user memory area of $3rows{\times}64columns$, is newly proposed in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.678-681
• /
• 2009

A single-pixel photon counter is designed using a folded cascode CMOS operational amplifier which is self-biased. Since there is no need for a voltage bias circuit, the layout area and power consumption of the designed counter are reduced. The signal voltage of the designed charge sensitive amplifier (CSA) with the MagnaChip $0.18{\mu}m$ CMOS process is simulated to be 138mv, near the theoretical voltage of 151mV. And the layout area of the designed counter is $100{\mu}m{\times}100{\mu}m$.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.7
• /
• pp.8-14
• /
• 2021

Even welds that have passed non-destructive testing in the case of brittle crack arrest steel materials will actually have very fine weld defects. Based on studies showing that these defects adversely affect the structure if subjected to a certain period of load, the following conclusions were obtained by conducting CTOD tests on welding joints of high-strength BCA materials, structures comprising the upper decks of a large container vessel. First of all, the fatigue pre-cracking in the weld metal and heat affected areas was tested and the behavior was identified. Both parts of the welding joint are allowable range for the class regulations. In addition, CTOD results showed that the CTOD value in the heat affected area was more than 0.5 times higher than in the weld metal area.

• Korean Journal of Materials Research
• /
• v.30 no.7
• /
• pp.376-382
• /
• 2020

CeO₂ nanoparticles, employed in a lot of fields due to their excellent oxidation and reduction properties, are synthesized through a solvothermal process, and a high specific surface area is shown by controlling, among various process parameters in the solvothermal process, the type of solvent. The synthesized CeO₂ nanoparticles are about 11~13 nm in the crystallite size and their specific surface area is about 65.38~84.65 ㎡/g, depending on the amount of ethanol contained in the solvent for the solvothermal process; all synthesized CeO₂ nanoparticles shows a fluorite structure. The dispersibility and microstructure of the synthesized CeO₂ nanoparticles are investigated according to the species of dispersant and the pH value of the solution; an improvement in dispersibility is shown with the addition of dispersants and control of the pH. Various dispersing properties appear according to the dispersant species and pH in the solution with the synthesized CeO₂ nanoparticles, indicating that improved dispersing properties in the synthesized CeO₂ nanoparticles can be secured by applying dispersant and pH control simultaneously.

• Journal of the Korean Dietetic Association
• /
• v.18 no.3
• /
• pp.248-265
• /
• 2012

A total of 262 dietitians (in 97 college foodservices nationwide, 86 elementary school foodservices, and 79 middle & high school foodservices in the Changwon area) were given a survey questionnaire composed of 18 GMP and 29 SSOP items from May to July, 2011. As a whole, total usage level of GMP facilities (3.65/5 points) and total management level of SSOP (3.86) in college foodservices showed no significant differences compared to those in elementary school foodservices (GMP 3.74, SSOP 4.02) and middle & high school foodservices (GMP 3.75, SSOP 3.95). However, the results of this study suggest that seven items of the GMP facilities and five items of the SSOP should be improved for the development of the HACCP facility model in college foodservices. Those items that showed considerably lower points in GMP were as follows: 'Drain pipes from sinks of the cooking area are connected directly to the drain (3.74)' (P<0.001), 'The grease trap is installed outside the cooking area equipped with an oil separator (3.24)' (P<0.01), 'Entrance and the cooking area are adequately equipped with hand-washing and shoe disinfecting facilities (3.61)' (P<0.001), 'Cooking area, food storage, and dining area are adequately equipped with insect and rodent repellents (3.72)' (P<0.001), 'Cooking areas are equipped with air-conditioning/heating system and ventilation facility for maintenance of temperature and humidity (3.35)' (P<0.05), and 'Toilets for cooking staff only are provided; the its doorways are not directly accessible from the cooking area (3.25)' (P<0.01).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.1-17
• /
• 2022

This study analyzed the PM_2.5 pattern by using data measured for one year from June 2020 to May 2021 by 21 low-cost sensors installed near the Changwon National Industrial Complex in Changwon, Gyeongsangnam-do. For the PM_2.5 pattern, the land use types around the measuring points and meteorological factors such as air temperature and wind speed were considered. The PM_2.5 concentration was high from November to March in winter, and from 1 to 9 in the morning and early in the morning by time zone. The concentration of PM_2.5 was higher as it got closer to the industrial area, but the concentration was lower in the residential area and public facility area. In terms of meteorological factors, the higher the air temperature and wind speed, the lower the concentration of PM_2.5. As a result of this study, it was possible to identify the PM_2.5 patter near Changwon National Industrial Complex. This result will be useful data that can be used in urban and environmental planning to improve air quality including PM_2.5 in urban area in the future.