• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.53-56
• /
• 2018

In this paper, a CMOS bandgap voltage reference that is not sensitive to changes in the external environment is presented. Large OLED display panels need high supply voltage. MOSFET devices with high voltage are sensitive to the output voltage due to the channel length modulation effect. The self-cascode circuit was applied to the bandgap reference circuit. Simulation results show that the maximum output voltage change of the basic circuit is 77mV when the supply voltage is changed from 10.5V to 13.5V, but the proposed circuit change is improved to 0.0422mV. The improved circuit has a low temperature coefficient of $9.1ppm/^{\circ}C$ when changing the temperature from $-40^{\circ}C$ to $140^{\circ}C$. Therefore, the proposed circuit can be used as a reference voltage source for circuits that require a high supply voltage.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.49-56
• /
• 2005

In this paper, we propose a memory BIST Circuit Creation System which creates BIST circuit based on user defined fault model and generates the optimized march test algorithm. Traditional tools have some limit that regenerates BIST circuit after changing the memory type or test algorithm. However, this proposed creation system can automatically generate memory BIST circuit which is suitable in the various memory type and apply algorithm which is required by user. And it gets more efficient through optimizing algorithms for fault models which is selected randomly according to proposed nile. In addition, it support various address width and data and consider interface of IEEE 1149.1 circuit.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2847-2850
• /
• 2003

A input voltage conversion dimming control formula and a PMW dimming control formula which have been used for dimming control of CCFL driving inverter in TFT-LCD backlight, are the existing facilities so far, however, in this thesis the circuit is designed by applying The rover inverter that are able to measure output brightness according to changing of duty ratio at PWM and voltage. consequently, it's able to be confirmed that we can have dimming control more detailed than before.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.7
• /
• pp.86-98
• /
• 1996

Modulation and demodualtion circuits of chaos frequency shift keying have been implemented using chua's circuits. The modulatin circuit, which is designed ot perform the frequency-doubling by coupled synchronization wihtout changing the intrinsic characteristics of its two chaos signals generated, modulates the digital input signals. The demodulation circuit detects the digital input signals form carrier by drive synchronization. these circuits, which are simplest until now and have no restriction to their digital input amplitudes, perform the aimed functions.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1001-1002
• /
• 2006

As most of the powerline modems use spread spectrum modulation method which has strong immunity against the narrowband fading, or psk modulation method, the amplitude of the signal contains no useful informations. In this paper, we used class D amplifier to implement the drive circuit of the analog front end, and showed that it has great superiority over other existing drive circuits in rapidly impedance changing power line channel.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.229-230
• /
• 2013

The conventional Three-Stage electronic ballast is stable, but Two-Stage electronic ballast has been researching because of efficiency. Three-Stage electronic ballast is consisted of PFC circuit, buck converter, and inverter circuit, but Two-stage is consisted of PFC circuit, Buck-Inverter full bridge circuit. The Buck-Inverter full bridge inverter consists of two half bridge inverters for low frequency switching, and high frequency switching. In the case of street lamp it is far from a lamp to a ballast, the conventional pulsed high voltage ignitor can not turn on the HID lamps because of reduction of ignition voltage. Therefore, it needs to do the research on a resonant ignition to turn on the HID lamps. Therefore, in the Two-Stage electronic ballast which has the resonant tank for ignition, the transient resonant current because of low frequency changing is analyzed, the novel algorithm is proposed to resuce the transient current.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.3
• /
• pp.152-156
• /
• 2009

This paper designs and implements wake up module for WBAN/USN sensor node which is using dynamic reference voltage demodulation circuit. When a comparator is used in a system for detecting received voltage level, comparator must have a reference voltage. However, the reference voltage is fixed, the system can communicate only a few range because received voltage level is changing widely due to distance of the wireless sensor nodes. Therefore, the proposed wake up module employs a dynamic reference voltage demodulation circuit for increasing communication range.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.388-393
• /
• 1988

New circuit D-Q transformation concept is introduced to analyze AC converters such as inverters, rectifiers and cyclo-converters with ease. The equivalent linear time invariant circuit is obtained by substituting switches with equivalent turn-ratio variable transformers and changing balanced AC reactors into equivalent DC reactors combined by gyrators. This circuit enables us to utilize the powerful linear system analysis techniques such as Laplace transform otherwise which could not be applied to the time varying switching systems. Direct substitution of switches of DC converters with transformers is shown as a preliminary. Then the modeling procedure is shown for a controlled rectifier-inverter circuit. Finally an analysis example is proposed for a buck-boost inverter and the result is compared with the conventional approach. This approach is applicable to all AC converter families to determine the AC transfer functions and the DC operating points. It is identified that the switching systems are equivalent to the RLC filter circuits with transformers and gyrators.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.849-852
• /
• 1993

This paper proposes a novel chaos generator using the model of Josephson junction. Constructing an equivalent circuit of Josephson element by using an operational amplifier, we have made a chaos generator. The feature of this generator is to generate several kinds of oscillations as well as chaotic oscillations by only changing a DC bias current to the junction. In this paper, it is described in detail how to construct the circuit and what kind of oscillations is realized in the circuit. The experimental results of oscillation modes are compared with simulation results with a satisfactory agreement.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2014

The conventional Three-Stage electronic ballast is stable, but Two-Stage electronic ballast has been researching because of efficiency. Three-Stage electronic ballast is consisted of PFC circuit, buck converter, and inverter circuit, but Two-stage is consisted of PFC circuit, Buck-Inverter full bridge circuit. The Buck-Inverter full bridge inverter consists of two half bridge inverters for low frequency switching, and high frequency switching. In the case of street lamp it is far from a lamp to a ballast, the conventional pulsed high voltage ignitor can not turn on the HID lamps because of reduction of ignition voltage. Therefore, it needs to do the research on a resonant ignition to turn on the HID lamps. Therefore, in the Two-Stage electronic ballast which has the resonant tank for ignition, the transient resonant current because of low frequency changing is analyzed, the novel algorithm is proposed to resuce the transient current.