• 제목/요약/키워드: Change of low-flow channel

검색결과 43건 처리시간 0.023초

도시하천 수문특성변화에 따른 수문모니터링 분석 (Hydrologic Monitoring Analysis due to Hydrologic Characteristic Variation at Urban Stream)

  • 서규우;김대곤;김남길;심봉주;원창희
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.746-751
    • /
    • 2006
  • The geumjunggu of the onchunchun which is the upper stream have been maintained as a too much picture to become a concrete lining about existing low flow channel and the reservoir water protecting banks for the reason of the flow of an upper stream steep slope and back of the shortage of the channel area in a suitableness interval. This research made a rating-curve to decide since to ensure against risks to the flood control through the undo of the rivers. And we found the speed of current of a nature undo interval and existing concrete interval and water level change out. A result from this natural disposition we must apply as a data for the research about the plan to be established in the rivers maintenance basis plan of onchunchun.

  • PDF

배리어가 포함된 카오스 마이크로 믹서의 개발 (Development of a Barrier Embedded Chaotic Micromixer)

  • 김동성;이석우;권태헌;이승섭
    • 대한기계학회논문집A
    • /
    • 제28권1호
    • /
    • pp.63-69
    • /
    • 2004
  • It is of great interest to enhance mixing performance in a microchannel in which the flow is usually characterized as a low Reynolds number (Re) so that good mixing is quite difficult to be achieved in this laminar flow regime. In this regard, we present a new chaotic passive micromixer, named Barrier Embedded Micromixer (BEM), of which the mixing mechanism is based on chaotic flows. In BEM, chaotic flow is induced by periodic perturbation of the velocity field due to periodically inserted barriers along the channel wall while a helical type of flow is obtained by slanted grooves on the bottom surface of the channel in the pressure driven flow. To experimentally compare the mixing performance, a T-microchannel and a microchannel with only slanted grooves were also fabricated. All microchannels were made of PDMS (Polydimethylsiloxane) from SU-8 masters that were fabricated by conventional photolithography. Mixing performance was experimentally characterized with respect to an average mixing intensity by means of color change of phenolphthalein as pH indicator. It was found that mixing efficiency decreases as Re increases for all three micromixers. Experimental results obviously indicate that BEM has better mixing performance than the other two. Chaotic mixing mechanism, suggested in this study, can be easily applied to integrated microfluidic systems , such as Micro-Total-Analysis-System, Lab-on-a-chip and so on.

펌프장에서 Sump내 흡입구 주위의 유동해석 (Flow Analyses around Intake within Sump in a Pump Station)

  • 노형운;김재수;서상호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2002년도 학술대회지
    • /
    • pp.597-600
    • /
    • 2002
  • In general, the function of intake structure, whether it be a open channel, a fully wetted tunnel, a sump or a tank, is to supply an evenly distributed flow to a pump station. An even distribution of flow, characterized by strong local flow, can result in formation of surface or submerged vortices, and with certain low values of submergence, may introduce air into pump, causing a reduction of capacity and efficiency, an increase in vibration and additional noise. Uneven flow distribution can also increase or decrease the power consumption with a change in total developed head. To avoid these sump problems pump station designers are considered intake structure dimensions, such as approaching upstream, baffle size, sump width, width of pump cell and so on. From this background, flow characteristics of intake within sump are Investigated numerically to obtain the optimal sump design data. The sump model is designed in accordance with HI code.

  • PDF

식생생장 영향을 고려한 하도변화에 대한 수치모의 (Numerical Experiments of Vegetation Growth Effects on Bed Change Patterns)

  • 김형석;박문형;우효섭
    • Ecology and Resilient Infrastructure
    • /
    • 제1권2호
    • /
    • pp.68-81
    • /
    • 2014
  • 본 연구에서는 2차원 흐름/유사이동 모형에 식생생장모형을 추가하여 하도의 식생 활착 및 성장에 의한 지형변화 과정과 특성을 수치모의 하였다. 교호사주가 발달하는 조건에서 식생 이입 및 활착은 사주의 이동을 감소시켰다. 식생면적 및 하폭의 변화는 저유량 지속시간보다 상류유량 변화에 더 크게 영향을 받았다. 상류유량이 감소하면 식생면적은 증가하고 하도폭은 감소하였다. 망상하도가 발달하는 조건에서 하도내 식생 이입 및 활착은 지형변화 특성에 크게 영향을 미쳤다. 망도하도에서 식생은 망상의 수를 감소시키고 결국 상류유량이 크게 감소하면 하도지형을 망상하도에서 단일수로로 변화시켰다. 식생면적은 상류유량이 증가함에 따라 감소하였다. 하도폭은 식생 도입 후 급격히 줄어들었고 상류유량 감소와 함께 감소하였다. 수치모의를 이용하여 홍수량 감소가 하도 내의 식생 이입 및 활착을 가속시키고 이로 인해 하도변화 특성에 미치는 영향을 정성적으로 확인할 수 있음을 보였다.

수심의 제한을 받는 침수식생 개수로의 평균흐름 예측모형 개발 (Development of Mean Flow Model for Depth-Limited Vegetated Open-Channel Flows)

  • 양원준;최성욱
    • 한국수자원학회논문집
    • /
    • 제43권9호
    • /
    • pp.823-833
    • /
    • 2010
  • 침수식생 개수로 흐름은 식생영역과 상부영역에 서로 다른 흐름구조를 보인다. 즉, 식생영역에서 전단으로 인해 생성되는 난류는 억제되며 비교적 균일한 유속 분포를 보이며 상부영역에서는 일반 개수로 흐름과 유사한 흐름구조를 보인다. 이와 같이 두 상이한흐름구조가 결합된 복잡한 흐름특성으로 인해 침수식생 개수로흐름은 공학적인 관심의 대상이 되어왔다. 본 연구에서는 침수식생 개수로 흐름의 층적분 모형의 비교 분석을 수행하였다. 일반적으로 식생흐름의 층적분 모형은 층의 수에 따라 2층 및 3층모형으로 구분한다. 즉, 전체 수심을 식생영역과 상부영역으로 구분하는 2층모형과 식생영역을 바닥 조도의 영향 유무에 따라 내부 및 외부 식생영역으로 구분하는 3층모형으로 분류된다. 본 연구에서는 2층모형과 3층모형을 비교하였다. 다양한 실험조건에 적용한 결과, 3층모형이 식생영역에서 유속의 변화를 고려할 수 있으나 결과는 레이놀즈응력 분포에 민감하며, 적분된 유속은 2층모형에 의한 예측 결과가 더욱 정확한 것으로 나타났다. 3층모형에서 내부 식생영역의 결과가 전체 흐름구조에 미치는 영향이 무시할 수 있으므로 이 점을 착안하여 식생영역에서 유속 변화가 고려되는 수정 2층모형을 제시하였다. 수정 2층모형에서 가정하는 레이놀즈응력 분포는 상부영역에서는 선형, 식생영역에서는 멱함수 형으로 변화한다. 다양한 조건에 적용한 결과, 수정 2층모형이 대체로 기존의 모형과 비슷한 정도의 예측을 수행하나 식생밀도가 매우 작은 흐름의 경우 예측 결과가 불량한 것으로 나타났다.

가솔린기관의 점화플러그 위치에서 난류유동 특성에 관한 연구 (A Study on Turbulence Flow Characteristics at the Spark Plug Location in S.I. Engine)

  • 정연종;조규상;김원배
    • 대한기계학회논문집
    • /
    • 제18권9호
    • /
    • pp.2423-2430
    • /
    • 1994
  • Several factors of the efficient combustion process are shape of combustion chamber, position of spark plug, turbulence flow and so on. the shape of combustion chamber and position of spark plug are constrained to geometrically, and then it could not make a change the shape easily. But the turlence flow in combustion chamber have a great influence on combustion phenomena, and which is much easier to control relatively. And since characteristics of turbulence flow would be very important to the stability of combustion and performances, This study is also essential to future engine-low emission and lean burn engine. This paper shows that the visualization of the turbulence flow of single cylinder engine by using 2way, $45^{\circ}$ inclined and 2 channel hot wire probe through the park plug hole. We also study the characteristics of turbulence flow by means of ensemble averaged mean velocity, turvulence intensity and integral length scale.

표면 거칠기 효과를 고려한 2-방정식 난류 모델의 성능평가 (Evaluation of Two-Equation Turbulence Models with Surface Roughness Effect)

  • 윤준용;천정민;강승규;변성준
    • 대한기계학회논문집B
    • /
    • 제27권12호
    • /
    • pp.1681-1690
    • /
    • 2003
  • The effect of roughness is a change in the velocity and turbulence distributions near the surface. Turbulence models with surface roughness effect are applied to the fully developed flow in a two-dimensional, rough wall channel. Modified wall function model, low-Reynolds number k-$\varepsilon$ model, and k-$\omega$ model are selected for comparison. In order to make a fair comparison, the calculation results are compared with the experimental data. The modified wall function model and the low-Reynolds number k-$\varepsilon$ model require further refinement, while the k-$\omega$ model of Wilcox performs remarkably well over a wide range of roughness values.

수공구조물이 하천환경에 미치는 영향에 관한 연구(II) : 수질 및 생태학적특성 (A Study on Effects of Hydraulic Structure on River Environment(II) : Water Quality and Ecological Characteristics)

  • 안승섭;최윤영;이수식
    • 한국환경과학회지
    • /
    • 제11권4호
    • /
    • pp.309-317
    • /
    • 2002
  • In this study, water protection reservoir is selected as the target which is located at the estuary of Taehwa river to analyze and examine the effects of hydraulic structure on river environment. This study examined the water quality variation characteristics among many effects of hydraulic structure on river environment before and after removal of the sediment protection reservoir when low flow is yielded. This study aims at the definition of factors which cause the change of ecological environment of river due to the effects of the sediment protection reservoir, and the proposal of the direction of environmental friendly river space development through the comparison of stream variation conditions(depth, velocity, and etc.) and riverbed variation characteristics with ecological depth condition of Taehwa-river's channel for each representative species of fish and examination those. Firstly, from the examination result of water quality when low flow is yielded before and after removal of the sediment protection reservoir for problems about water quality of river due to flow amount decrease in river, it is found that DO decreases about 0.78~0.86ppm at the lower stream of Myeongchon-gyo, and BOD decreases about 0.06~0.24ppm from right upper stream to the direction of estuary when the sediment protection reservoir is removed. It is known from the above that there is some improvement of water quality from the lower stream of Taehwa-gyo to the estuary in case of removal the sediment protection reservoir. Nextly, it is thought that the effects on ecosystem due to water depth and draw down in channel is not serious on the basis of the examination of water quality analysis result according to removal of sediment protection reservoir and hydraulic depths for reservation of ecosystem, these are 10~40cm for breeding season, 10~50cm for fry period, and 10~100cm for adult period of the representative species of fish in Korea.

인위적인 보 수위조절로 인한 영산강 하도 지형 변화 (Changes in the Riverbed Landforms Due to the Artificial Regulation of Water Level in the Yeongsan River)

  • 임영신;김진관
    • 한국지형학회지
    • /
    • 제27권1호
    • /
    • pp.1-19
    • /
    • 2020
  • A river bed which is submerged in water at high flow and becomes part of the river at low flow, serves as a bridge between the river and the land. The channel bar creates a unique ecosystem with vegetation adapted to the particular environment and the water pool forms a wetland that plays a very important role in the environment. To evaluate anthropogenic impacts on the river bed in the Middle Yeongsangang River, the fluvial landforms in the stream channel were analyzed using multi-temporal remotely-sensed images. In the aerial photograph of 2005 taken before the construction of the large weirs, oxbow lakes, mid-channel bars, point bars, and natural wetlands between the artificial levees were identified. Multiple bars divided the flow of stream water to cause the braided pattern in a particular section. After the construction of the Seungchon weir, aerial photographs of 2013 and 2015 revealed that most of the fluvial landforms disappeared due to the dredging of its riverbed and water level control(maintenance at 7.5El.m). Sentinel-2 images were analyzed to identify differences between before and after the opening of weir gate. Change detection was performed with the near infrared and shortwave infrared spectral bands to effectively distinguish water surfaces from land. As a result, water surface area of the main stream of the Yeongsangang River decreased by 40% from 1.144km2 to 0.692km2. A large mid-channel bar that has been deposited upstream of the weir was exposed during low water levels, which shows the obvious influence of weir on the river bed. Newly formed unvegetated point bars that were deposited on the inside of a meander bend were identified from the remotely sensed images. As the maintenance period of the weir gate opening was extended, various habitats were created by creating pools and riffles around the channel bars. Considering the ecological and hydrological functions of the river bed, it is expected that the increase in bar areas through weir gate opening will reduce the artificial interference effect of the weir.

고분자 전해질 연료전지용 바이폴라 플레이트의 유로 연구 (Study on the channel of bipolar plate for PEM fuel cell)

  • 안범종;고재철;조영도
    • 한국가스학회지
    • /
    • 제8권2호
    • /
    • pp.15-27
    • /
    • 2004
  • 본 논문은 상용 프로그램인 Fluent를 이용하여 고분자 전해질 연료전지(polymer electrolyte membrane fuel cell)의 바이폴라 플레이트 위에 새겨진 유로형상을 분석함으로서 연료전지의 성능을 향상시키는데 그 목적이 있다. 수소 소모량이 가장 많은 유로크기를 구하기 위하여 0.5 ${\~}$ 3.0mm의 범위에 대해 시뮬레이션을 수행하였으며, 유로너비, 지면너비, 유로깊이가 적을수록 아노드에서 수소이용율이 높음을 알 수 있었다. 유로너비가 증가하면 유로의 전체길이를 감소하므로 유로에서 압력하락이 감소하게 되며, 지면너비를 증가시키면 수소가 지면 밑으로 확산하여 수소의 순 소비가 감소하기 때문이다. 또한 유로너비를 변화시키는 것은 지면너비를 변화시키는 것보다 수소 소모에 민감하게 영향을 끼침을 알 수 있었다. 유로깊이에 따른 수소 소모량의 변화는 유로너비에 비해 크지 않으나 유로깊이는 바이폴라 플레이트의 부피에 크게 영향을 미치므로 가능한 한 적게 하여야 한다. 그러나 현실적으로 기계가공이 가능한 1mm이상의 유로에서는 유로너비 1.0mm, 지면너비 1.0mm, 유로깊이 0.5mm에서 수소 이용율이 가장 높았으며 최적 유로크기로 판단된다. 시뮬레이션결과로부터 최적 유로크기로 성형한 2cm${\times}$2cm크기의 대각선형과 5자형 유동장에 MEA를 결합한 단위전지의 성능을 100W 연료전지평가시스템을 이용하여 측정하였다. 측정결과는 대각선형과 5자형에서 유사하게 높은 OCV가 나타났으며, 전류밀도는 0.6V이하에서는 대각선형이 $2-40mA/m^2$ 더 높았으나 0.7-0.8V에서는 S자형이 $5-10mA/m^2$ 더 높게 나타났다.질을 향상시키고 의료자원의 효율적인 이용을 촉진하기 위해 호스피스 완화의료 서비스의 표준화와 제도화가 필요하다.를 활용한 사용자인터페이스(UI)디자인의 가능성을 확대시킬 수 있을 것이다. 스크린의 사용에 있어서 사용자의 시각적 한계성을 극복하기 위한 새로운 GUI의 시도와 제안은 향후 모바일 기기 디자인의 새로운 방향성을 제시하고 있다.각되며 이를 위해서는 호스피스 관련 기관뿐만 아니라 국가적 차원의 아동 호스피스에 대한 관심과 지원이 요구된다고 생각한다. 양상과 일치하였고 표준조건(water flux 1 cm/일)에서 예측된 이동소요시간에 따라 metolcarb는 most mobile, molinate와 fenobucarb, isazofos는 mobile내지 most mobile, dimepiperate는 moderately mobile이나 mobile, diazinon은 mobile, fenitrothion과 parathion은 slightly mobile 또는 mobile, chloipyrifos-methyl은 immobile이나 slightly mobile 등급에 속하는 것으로 나타났다.히 요구되고 있는 현실이다.브로 출시에 따른 마케팅 및 고객관리와 관련된 시사점을 논의한다.는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼 수 있다.36.4%)와 외식을 선호(29.1%)${\lrcorner}$ 하기 때문에 패스트푸드를 이용하게 된 것으로 응답 하였으며, 남 여 대학생간에는 유의한

  • PDF