• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1253-1262
• /
• 2006

This research explored the clothing behavior of dementia inpatient according to the dementia severity, dementia type and demographic characteristics. Data were collected by surveying 149 dementia inpatients and their caregivers. The collected data were analysed through frequency analysis, $X^2$-test, one way ANOVA, Duncan's multiple range test and t-test. The results were as follows: First, the dementia severity was classified into the severe, moderate and mild dementia by K-MMSE and the dementia types were composed of Alzheimer's disease, vascular dementia and the others. The severe dementia group and Alzheimer's disease group included the more aged and more female inpatients. And the severe dementia group was lower self-support of the basic activities of daily living than the mild dementia group. Second, the change motions of the dementia inpatient's clothing differed from the clothing item and dementia severity. That is, the motions for pants were more difficult than those for upper garment. And the motions for severe dementia group were more difficult than those for the mild dementia group. Third, there were significant differences among the three groups by dementia severity and between the male and female dementia inpatient in the clothing behavior. Most of abnormal clothing behaviors were found in the severe dementia group. The positive clothing behaviors appeared in the mild dementia group. And interests of clothing and appearance appeared in the female inpatients.

• The Research Journal of the Costume Culture
• /
• v.16 no.1
• /
• pp.130-144
• /
• 2008

A recent concern about Goguryeo era reflects the efforts to find out our spiritual roots, which have descended from the ancient times; Goguryeo clothing study leads to analysis of our national spirit in terms of form. This study aims to analyze formal property and intrinsic meaning of Goguryeo clothing for Korean ramie clothing design and draw traditional images to derive design elements applicable to ramie clothing. On the basis of technical books, newspaper article, internet and precedent studies, theoretical study on Goguryeo clothing and ramie property was followed up with positive study to analyze the clothing on the Goguryeo ancient tomb mural. The results are as follows: First, a progressive spirit is to progress and develop anything actively; This spirit represents Goguryeo people's ambition and racial characteristic as horse-riding people; The rigidity of ramie fabric is suitable for expressing straight silhouettes and detail in Goguryeo dress. Second, a fluidity means flowing property in opposition to fixation; in the case of clothing, it has a tendency to change form according to body motions; The extensibility and crease-resistance of ramie fabric is suitable to express pleated skirts and holds high design value for modern people who tend to regard clothing as important individuality expression. Third, a universal property to introduce and receive; as Goguryeo was a prosperous country established by conquering an open plain, the period formed a society that recognized diversity by introducing foreign cultures freely; a universality suggests the direction of modernization of traditional ramie clothing and stimulates us to discovert new design through compromise between various cultures rather than to stick to traditional style. Considering the fact that precedent studies on traditional clothing are concentrated upon the Joseon period and also limited to formal analysis, this study aims to derive design elements for actual clothing making. These results are expected to be used as basic material for study as well as reference for designers who wish to design modern Korean clothing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.5
• /
• pp.852-859
• /
• 1996

The factors and mechanism of arm surface changes were analyzed by regression analysis for the relationship between changes in arm joint angle and arm surface changes, according to the direction of upper extremity motion. Body surface change patterns among subjects were tested also. Experiments were carried out on 3 female subjects of different body types to examine 26 motions in 4 directions for 4 upper extremity parts. The major conclusions of the study are as follows: 1. The expansion or contraction of arm surface length depends on the direction of upper extremity motion. 2. Arm surface length changes by linear expansion or contraction according to the joint angle of the direction of motion. The mechanism of arm surface changes is represented by a linear relation between arm surface changes and the (actors of the direction of upper extremity motion and arm joint angle. 3. Arm surface length shows the same pattern of body surface changes regardless of body type. A quantitative model of body surface changes at upper extremity should be developed for functional sleeve design.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.615-632
• /
• 2017

This study conducted a wearing evaluation of fall impact protective clothing developed in the previous study that evaluated activity, appearance, and practicality for elderly women. A total of 6 kinds of pants, which consisted of the three kinds of pads and two kinds of designs, were evaluated and the results are as follows. First, the activity of the protective clothing was tested with six women in their 60's and scored highly in most criterions that indicated satisfactory activity. The honeycomb type pad was superior in four of ten criterions for the activity evaluation results by pad types. Design B without a knee pad was evaluated as more comfortable on two motions that put pressure on the knee area. Second, the expert group considered design A to be better than design B, while the subject group preferred design B over design A in design appearance evaluation. Both the subject group and expert group evaluated that design A is better than design B in consideration of pads. Third, in the assessment of practicability, both the expert group and the subject group provided the highest score on the question of if elderly women needed protective clothing. The evaluation of washing ability indicated no noticeable change in the clothing form and size before and after washing.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.650-659
• /
• 2020

The present study provides reference data required for the design of clothing for the elderly by analyzing the body surface area during fitness motion based on 3D scan data of Korean elderly women. This study was conducted with the procedures of (1) survey of motions and main muscles for fitness, (2) acquisition of 3D scan data, and (3) analysis of rate of change for body surface area during fitness motion. Acquisition of 3D body scan data was obtained from seven elderly females (age: 64-77). We selected 66 anatomical landmarks (40 upper body and 22 lower body) by referring to previous studies. Body surface was segmented by connecting the landmarks marked on the 3D scan data acquired. Analysis of body surface area was conducted in terms of the change rate of surface area in 9 postures of elbow 0°, 90° and 180° for flexion, shoulder 90°, 180° for flexion, shoulder 0°, 180° for abduction, hip 90° for flexion, and knee 90° for flexion compared to the those in the standing posture. The amount of changes in body surface area were 12%-62% in the upper body, 15%-77% in the arm, and 10%-51% in the lower body. A future study on the rate of change of body surface length is needed; in addition, a study on how to apply the results of body surface area and body surface length analysis to clothing pattern design is also necessary.

• Fashion & Textile Research Journal
• /
• v.4 no.2
• /
• pp.145-155
• /
• 2002

In order to investigate how upper limb motion gives influence on clothing, this study measured tests by following standards: Front Vertical motion, Side-Vertical motion, and Horizontal motion. For this study, the procedures in the order of alphabet are applied. A. Eeach of testee's pattern was copied by the motion with a method of tight fitting technique. B. Analyzing each of the size-change on measuring item. C. Studying the moving aspects at each datum points. The results shows that the biggest change can be found in the following items. 1) In vertical motion of F4 (the length to shoulder point from A-point) 2) In horizontal motion of F5 (the length to front-width point from A-point), the check-result gained by checking the notice between motions shows that the most noticeable items are F4 (the length to shoulder point from A-point), F5 (the length to front-width point from A-point), F6 (the length to armpit point from A-point), B7 (the length to side-waist point from B-point). In result of the study of datum point's movement by motion, the items which were measured with the longest on straight-distance in vertical motion are the front and rear-shoulder, and the rear-shoulder, front-armpit in horizontal motion each. In the movement of each datum points by length, the check-result gained by checking the notice between motions shows that the most remarkable item is the front-shoulder.

• Journal of the Korean Home Economics Association
• /
• v.30 no.3
• /
• pp.63-77
• /
• 1992

The purpose of this study is to improve clothing construction by analyzing form variation of upper trunk & upper arms with the use of plaster cast. Experimental research was performed by plaster gypsum method. The subjects were males between age 21 and 25, classified Standard somatotype by their bust size and Rorher Index. Arm movements were consisted of 5 types(0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$, 135$^{\circ}$, 180$^{\circ}$) to each vertical motion in front. The statistical analyses used in this study were mean, standard deviation, repeated mesure design. The result obtained from this study were as follows; 1. As a result of investigating into the rate of the expantion and contraction of basic body-surfact-lines, the side seam length showed the maxium rate of expantion in 180$^{\circ}$ degrees, the shoulder length showed the maxium contraction in the same degrees. 2. The variation of the upper part of the body form by increasing the upper limb motions, shoulder point was moved to be the inside or upside. And the anterior armfit point, posterior armfit point and armfit point were moved to upside. The form of the armhole-line in Drafts of a body surface was differently changed by increasing the movements. 3. Increasing the upper limb motions, the height of sleeve cap decresed and width of the sleeve decreased but girths of the sleeve cap was not show consistant change.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.6
• /
• pp.911-923
• /
• 1995

The zone of expansion and contraction of arm surfaces was analyzed, the correlation between arm surface changes was studied, and ergonomic sleeve designs were presented in which the consideration of body surface changes is emphasized. Experiments were carried out which include 43 upper extremity segments, 21 motions and 35 female subjects. The major conclusions of the study are as follows : 1. As a sleeve drafting method, detailed measures should be applied on the base of the sensitivity of body surface changes. The range of arm surface changes can be divided into three zones : concentrated expansion zone, zone of little change, and contraction part. The maximum expansion zone was the upper part of elbow. 2. The correlations were higher in lengths than in circumferences. Arm lengths were mainly correlated with upper arms. The more detailed the arm surface was, the lower the correlations between surface changes were. So there was not a lot of relation between segment changes. Tendency of body surface changes depended on the anatomical structure of the upper extremity and the movements of arm muscles. 3. As an application of measures and ease, ergonomic sleeve designs weve presented in which arm surface changes were considered. Ergonomic sleeve designs are recommended for working clothes and sports wear.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.129-138
• /
• 2021

This study aimed to determine the effects of the shape and attachment position of stretchable textile sensors coated with carbon nanotube on their performance when used to measure children's joint movements. Moreover, the child-safe requirements for fabric motion sensors are established. The child participants were advised to wear integrated clothing equipped with the sensors of various shapes (rectangular and boat-shaped) and attachment positions (at the knee and elbow joints or 4 cm below the joints). The voltage change induced by the elongation and contraction of the fabric sensors was determined for arm and leg flexion-extension motions at 60 deg/s (three measurements of 10 repeats each for 60°and 90°angles, for a total of 60 repetitions). Their dependability was determined by comparing the fabric motion sensors to the associated acceleration sensors. The experimental results indicate that the rectangular-shaped sensor affixed 4 cm below the joint is the most effective fabric motion sensor for measuring children's arm and leg motions. In this study, we designed a textile sensor capable of tracking children's joint motion and analyzed the sensor shape and attachment position on motion sensing clothing. We demonstrated that flexible fabric sensors integrated into garments may be used to detect the joint motions of the human body.

• Fashion & Textile Research Journal
• /
• v.12 no.6
• /
• pp.789-795
• /
• 2010

The purpose of this study was to examine the appropriate surplus of clothing for a jacket bodice pattern of middle-aged obese men by using the 3D virtual twin and virtual garment simulation system. The results were as follows ; 1. BMI rate of middle-aged males was 28.13 which was equivalent to mild obesity, whereas WHR(W/H ratio from waist to hips) rate was near 1.00 which was highly dangerous against their obesity. In case of middle-aged obese men, the WHR was significantly higher than the entire middle-aged men's average and the section shape in which their thickness was relatively more than width. 2. As a result of appearances evaluation through virtual garment simulation, the cut-off amount of the side seam and the center back was regulated accordingly. Hereby, the final tolerance range was set up at 21.15 cm at the hips, so that the appearances became better and the bilateral distribution of the cross section and space length was formed symmetrically. Especially in case of increasing the cross amount of hems to produce a natural silhouette of the waist-to-hips parts, the ease of buttocks was judged to be moderate, but it turned out that a wavy cross section was made and the silhouette was not good. Thus it was found to be not good that the ease of the hips became excessively increased in proportion as circumference of waist and belly were increased in obesity. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.