• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1065-1070
• /
• 1996

Antimutagenic effect of chitosan hydrolysates was investigated using Salmonella typhimurium reversion assay and SOS chromotest against 3-amino-1-methyl-5H-pyrido[4,3-b]lindole(Trp-P-2), aflatoxin $B_1$, 2-nitrofluorene and 4-nitroquinoline oxide. After partial acid hydrolysis of chitosan, six fraction of different molecular size were obtained by ultrafiltration. Chitosan hydrolysates showed antimutagenic effect of $0{\sim}78%$ on Trp-P-2, $0{\sim}92%$ on aflatoxin $B_1$ and $0{\sim}51%$ on 2-nitrofluorene in Salmonella typhimurium reversion assay. Inhibitory effect in Salmonella typhimurium reversion assay showed the highest at 5% concentration of fraction 6 in Trp-P-2, 10% concentration of fraction 5 in aflatoxin $B_1$ and 5% concentration of fraction 6 on 2-nitrofluorene. In SOS chromotest, chitosan hydrolysates showed anitimutagenic effect of $0{\sim}54%$ on Trp-P-2 and $0{\sim}77%$ on 4-nitroquinoline oxide, These results suggest that high molecular weight fraction of chitosan hydrolysates (MW>30,000) in most effective to inhibit mutagenicity of tested mutagens.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.348-354
• /
• 1994

Chitin and chitosan samples prepared from crab's shells under different conditions were compared for their physicochemical properties; and functionality in gastrointestinal tract by in vitro test. Their bulk density was in the range of $127{\sim}208\;mg/ml$, and their viscosity was $80{\sim}581\;cP$ in 0.1 chitin and $80{\sim}3,670\;cP$ in 0.5% chitosan solution, showing a wide variation. The degree of deacetylation in chitosan samples as determined by IR spectral analysis was relatively high, showing $81{\sim}93%$. At the same alkali concentration and reaction temperature, a longer reaction period gave an increased degree of deacetylation and lower viscosity. The water holding capacity of chitic substance became greater at higher soaking temperature; chitosan D at $37^{\circ}C$ showed the greatest value. Chitic substance with lower bulk density showed the higher water holding capacity. The retardation effect toward glucose absorption was higher in critic substances of lower density and higher water holding capacity; chitosan D showed the highest value of 38%. The retardation index toward bile acid absorption after 1 hour dialysis was $15{\sim}34%$ in chitic substances, 39% in pectin and 9% in cellulose. The retarding effect showed the highest value of 34% in chitosan D at 3% concentration.

• Korean journal of applied entomology
• /
• v.53 no.1
• /
• pp.7-13
• /
• 2014

This study was performed to investigate the response of the lacewing Chrysopa cognata to both Aphis gossypii-induced plant volatiles and lacewing-derived volatiles. The results of a Y-tube olfactometer bioassay showed that more C. cognata males were attracted to green pepper plants infected with A. gossypii than to uninfected green pepper plants alone or clean air and C. cognata males were attractive to C. cognata females. Gas chromatography-electroantennographic detection (GC-EAD) analysis showed that the antennae of C. cognata females elicited EAD-active responses to the volatiles entrained from A. gossypii-infected green pepper plants. 4-Ethylacetophenone, 3-ethylbenzaldehyde, 3-ethylacetophenone, and 4-ethylbenzaldehyde from A. gossypii-induced green pepper volatiles, and (Z,Z)-4,7-tridecadiene, (Z)-4-tridecene, and (Z)-4-undecene from C. cognata female entrainment were elucidated by further analysis using GC coupled nuclear magnetic resonance spectroscopy. Of the A. gossypii-induced plant volatiles identified in this study, 4-ethylacetophenone and 3-ethylbenzaldehyde significantly increased the attraction of C. cognata males to nepetalactol, but (Z)-4-tridecene and (Z)-4-undecene did not. (Z,Z)-4,7-Tridecadiene significantly reduced the attractiveness of nepetalactol to C. cognata.

• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.393-400
• /
• 2015

An insect parasitic mite was found on a larva from Japanese apricot seed. The mite was identified as Pyemotes moseri Yu et Liang (Acarina: Pyemotidae) new to Korea. The host larva was identified as Eurytoma maslovskii using mitochondrial DNA sequencing analysis. We conducted preliminary study on its reproduction and parasitization capacity in laboratory condition. A mated female mite reared on Eurytoma maslovskii larva. We counted and sexed newborn progenies and then eliminated them during periodical observations. To test parasitization capacity, a PCR tube containing mass reared P. moseri and Japanese apricot seeds (assumed bear larva of E. maslovskii) placed in a stainless bath filled with potting soil. One month later, we surveyed the seeds whether the E. maslovskii larva parasitized by mite or not. We repeated this experiment three times with five replications each. Average life span (days from parasitization to the end of reproduction) of gravid females was 24.4 days (n=8). A gravid female reproduced 104.0 female progenies (n=8). Although there were more than seven Japanese apricot seeds per bath containing larva or pupa, we found parasitization only in two seeds.

• Journal of the Korean Magnetics Society
• /
• v.17 no.4
• /
• pp.162-165
• /
• 2007

We investigated the effects of the capping layer materials on the crystallization of the amorphous top-CoFeB (t-CoFeB) electrode and the magnetoresistance properties of the magnetic tunnel junctions (MTJs). When the hcp(002)-textured Ru capping layer was used, the amorphous t-CoFeB was crystallized to bcc-CoFe(110). The CoFe(110)/Ru(002) texture relation can be minimized the lattice mismatch down to 5.6%. However, when the fine polycrystalline but almost amorphous TiAl or amorphous ZrAl were used, the amorphous t-CoFeB was crystallized to bcc-CoFe(002). When the amorphous capping materials were used, the evolution of the t-CoFeB texture was affected mainly by the MgO(001) texture. Consequently, the M ratios of the annealed MTJ capped with the ZrAl and TiAl (72.7 and 71.8%) are relatively higher than that of the MTJ with Ru capping layer (46.7%). In conclusions, the texture evolution of the amorphous t-CoFeB during the post deposition annealing could be controlled by the crystallinity of the adjacent capping layer and in turn, it affects the TMR ratio of MTJs.

• Journal of Embryo Transfer
• /
• v.22 no.4
• /
• pp.245-249
• /
• 2007

The aim of present experiment was to examine hatching rate as in vitro indicator of viability of porcine embryos before early stage embryo transfer such as zygotes or 2-cell stage embryos. Cumulus-oocyte complexes (COCs) collected from ovaries were matured in North Carolina State University 23 (NCSU-23) containing 10% porcine follicular fluid (pFF), 10 ng/ml epidermal growth factor (EGF), $10{\mu}g/ml$ follicle stimulating hormone (FSH), $35{\mu}g/ml$ luteinizing hormone (LH), and 1mg/ml cysteine. After 24 hours, the COCs were transferred to the same medium without hormones. After 65h of maturation, oocytes were exposed to phosphate buffered saline (PBS) with 7% ethanol (v/v) for 7 minutes, and then the oocytes were washed and cultured in tissue culture medium (TCM) 199 containing 5 ug/ml cytochalasin B for 5h at $38.5^{\circ}C$ in an atmosphere of 5% $CO_2$ and 95% air with high humidity. After cytochalasin B treatment, the presumptive parthenotes were cultured in porcine zygote medium (PZM)-5 and cleavage of the parthenotes was assessed at 72h of activation, Normally cleaved parthenotes were cultured for an additional 8 days to evaluate their ability to develop to blastocyst and hatching stages. The fetal bovine serum (FBS) were added at Day 4 or 5 with concentrations of 2.5, 5 or 10%. The blastocyst rates were ranged within $39.1{\sim}70%$ in each treatment. However hatching rate was dramatically decreased in non-addition group. In this experiment, embryo viability in female reproductive tract may be estimated before embryo transfer with in vitro culture adding FBS by hatching ability.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.15-21
• /
• 2015

Natural gas fuel has known to be very promising in terms of abundancy and economic value. Therefore it is widely treated as research topics in a variety field of production, storage and utilization. Natural gas has become one of the major sources for the power generation by using internal combustion engines(ICE). Development of natural gas fuel injection device should be preceded to realize a reliable natural gas fuel supply system for a MW class power generation reciprocating ICE. In this research, an injection valve which consists of solenoid and body part with a moving plate was designed and its dynamic performance was experimented in the engine-like environment. As a result of the experiments, linearity of flow rate was obtained and overall around 2ms of response time was observed at the pressure difference of 1bar. In addition, more than 100Liter/min(@2Hz) of gas flow rate was witnessed, which is expected to be adequate for the fuel supply system of a MW class natural gas engine.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.125-137
• /
• 2013

Global warming and climate change have influence on abnormal weather pattern and the rainstorm has a localized and intensive tendency in Korea. IPCC(2007) also reported the rainstorm and typhoon will be more and more stronger due to temperature increase during the 21st century. Flood Estimation Handbook(Institute of Hydrology, 1999) published in United Kingdom, in the case that the data period is shorter than return period, recommends the regional frequency analysis rather than point frequency analysis. This study uses Regional Climate Model(RCM) of Korea Meteorological Administration(KMA) for obtaining the rainfall and for performing the regional frequency analysis. We used the rainfall data from 58 stations managed by KMA and used L-moment algorithm suggested by Hosking and wallis(1993) for the regional frequency analysis considering the climate change. As the results, in most stations, the rainfall amounts in frequencies have an increasing tendency except for some stations. According to the A1B scenario, design rainfall is increased by 7~10% compared with the reference period(1970-2010).

• Korean Journal of Food Science and Technology
• /
• v.30 no.4
• /
• pp.823-826
• /
• 1998

It has been reported that alginic acid hydrolysate retains antimicrobial activity but the enzyme which hydrolyze alginic acid is not developed for industrial use. The authors developed chemical method for hydrolyzing alginic acid. For preparing alginic acid hydrolysate, equal quantity of alginic acid and ascorbic acid were added to water. Then the solution was heated at $121^{\circ}C$ for $20{\sim}30{\;}minutes$. The 4% solution of alginic acid hydrolysate was revealed relative viscosity 1.05, pH 3.2 and opaque whitish-yellow color. By addition of this hydrolysate to nutrient broth with the concentration of 0.1%, the growth of Bacillus sp. isolated from fish meat paste products was inhibited. The fish meat paste products containing 0.3% alginic acid hydrolysate prepared were prolonged their shelf life by 1 day stored at $30^{\circ}C$, 2 days at $20^{\circ}C$ and 4 days at $15^{\circ}C$.

• The Korean Journal of Urological Oncology
• /
• 제15권3호
• /
• pp.178-186
• /
• 2017

Purpose: Poloxamer 407 (P407) thermo-sensitive hydrogel formulations were developed to enhance the retention time in the urinary bladder after intravesical instillation. Materials and Methods: P407 hydrogels (P407Gels) containing 0.2 w/w% fluorescein isothiocyanate dextran (FD, MW 4 kDa) as a fluorescent probe were prepared by the cold method with different concentrations of the polymer (20, 25, and 30 w/w%). The gel-forming capacities were characterized in terms of gelation temperature (G-Temp), gelation time (G-Time), and gel duration (G-Dur). Homogenous dispersion of the probe throughout the hydrogel was observed by using fluorescence microscopy. The in vitro bladder simulation model was established to evaluate the retention and drug release properties. P407Gels in the solution state were administered to nude mice via urinary instillation, and the in vivo retention behavior of P407Gels was visualized by using an in vivo imaging system (IVIS). Results: P407Gels showed a thermo-reversible phase transition at $4^{\circ}C$ (refrigerated; sol) and $37^{\circ}C$ (body temperature; gel). The G-Temp, G-Time, and G-Dur of FD-free P407Gels were approximately $10^{\circ}C-20^{\circ}C$, 12-30 seconds, and 12-35 hours, respectively, and were not altered by the addition of FD. Fluorescence imaging showed that FD was spread homogenously in the gelled P407 solution. In a bladder simulation model, even after repeated periodic filling-emptying cycles, the hydrogel formulation displayed excellent retention with continuous release of the probe over 8 hours. The FD release from P407Gels and the erosion of the gel, both of which followed zero-order kinetics, had a linear relationship ($r^2=0.988$). IVIS demonstrated that the intravesical retention time of P407Gels was over 4 hours, which was longer than that of the FD solution (<1 hour), even though periodic urination occurred in the mice. Conclusions: FD release from P407Gels was erosion-controlled. P407Gels represent a promising system to enhance intravesical retention with extended drug delivery.