• Communications of the Korean Mathematical Society
• /
• v.38 no.3
• /
• pp.847-863
• /
• 2023

We introduce the study of generic lightlike submanifolds of a semi-Riemannian product manifold. We establish a characterization theorem for the induced connection on a generic lightlike submanifold to be a metric connection. We also find some conditions for the integrability of the distributions associated with generic lightlike submanifolds and discuss the geometry of foliations. Then we search for some results enabling a generic lightlike submanifold of a semi-Riemannian product manifold to be a generic lightlike product manifold. Finally, we examine minimal generic lightlike submanifolds of a semi-Riemannian product manifold.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.7
• /
• pp.3061-3064
• /
• 2012

Aim: An epidemiological shift has resulted in increase in the prevalence of non-communicable diseases (NCD). Unlike other NCDs which are easily and definitely preventable, the knowledge of cancer prevention is still limited at present. Various aetiological factors are difficult to control since those are habit forming. Hence an available remedy remains its secondary and tertiary prevention for which appropriate planning is of paramount importance. Evidence based planning requires careful analysis of data with a view to prioritize various cancers. Keeping in view the fact that the adaptation of smoking free status in Chandigarh city might have a far reaching positive effect on the cancer related morbidity of the people, the following study was undertaken to provide base line data to be used for future comparisons. Methods: The registers maintained in the Department of Radiotherapy were checked and those belonging to the years 1999 to 2009 were utilized to analyze the cancer morbidity in respect to age, sex, and year of presentation to health care facility. Results: A total of 4,600 cancer patients (males=2276, females=2324) demonstrated a gradual increase in the number of cancer cases from 150 in the year 1999 to 783 in the year 2009. The most common cancers amongst males were cancer of gastro-intestinal tract (GIT) and lung (including larynx) constituting 37.3% and 27.1% of the total, respectively. In females these were cancers of breast and cervix representing 33.3% & 17.6% of total cancer cases, respectively, and lung cancer constituted 5.3%. The maximum cases of bone cancer (53.8% of all bone cancers) were observed amongst children aged less than 20 years and lung cancer (48.2% of all lung cancers) among the elderly aged 60-69 years. The.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.8
• /
• pp.3499-3503
• /
• 2015

Background: Cancer has become an epidemic disease. Nearly ten million new cancer cases are diagnosed annually in the world and out of these about half are from the developing world. To appropriately plan for treatment, management and prevention of the disease, it becomes necessary to study the trends about morbidity caused by cancers. Materials and Methods: Data for patients diagnosed with any form of gastrointestinal (GI) cancers was extracted from records maintained in the outpatient department registers of the Oncology Department of Government Medical College and Hospital in Chandigarh from 1999 to 2012. Trends were analysed for different categories of GI cancers for the period of 12 years. Results: In present study GI cancers accounted for 23 % of all registered cases (n-9603) of carcinomas. Males predominated for all GI cancers except in the gall bladder. Gastrointestinal cancers as a proportion of total cancers increased from 21% in 1999 to 25.9% in 2012 with a significant increasing trend in our series (${\chi}^2$ for linear trend=9.36, p<0.003). Cancers of the tonsil, oral cavity and pharynx taken together showed an increasing trend over the years (${\chi}^2$ for trend=55.2, p<0.001) whereas cancers of the lower GI (${\chi}^2=19.6$, p<0.0001) and gall bladder (${\chi}^2=19.5$, p<0.0001) showed a declining trend in our series. Conclusions: GI cancers form a significant proportion of all cancers reporting to our data. In depth studies to ascertain the reasons for the changing trends are required to design intervention programs. Further information is necessary from cancer registries and from the hospital records of oncology departments.

• Healthcare Informatics Research
• /
• v.24 no.4
• /
• pp.300-308
• /
• 2018

Objectives: Prompt detection is a cornerstone in the control and prevention of infectious diseases. The Integrated Disease Surveillance Project of India identifies outbreaks, but it does not exactly predict outbreaks. This study was conducted to assess temporal correlation between Google Trends and Integrated Disease Surveillance Programme (IDSP) data and to determine the feasibility of using Google Trends for the prediction of outbreaks or epidemics. Methods: The Google search queries related to malaria, dengue fever, chikungunya, and enteric fever for Chandigarh union territory and Haryana state of India in 2016 were extracted and compared with presumptive form data of the IDSP. Spearman correlation and scatter plots were used to depict the statistical relationship between the two datasets. Time trend plots were constructed to assess the correlation between Google search trends and disease notification under the IDSP. Results: Temporal correlation was observed between the IDSP reporting and Google search trends. Time series analysis of the Google Trends showed strong correlation with the IDSP data with a lag of -2 to -3 weeks for chikungunya and dengue fever in Chandigarh (r > 0.80) and Haryana (r > 0.70). Malaria and enteric fever showed a lag period of -2 to -3 weeks with moderate correlation. Conclusions: Similar results were obtained when applying the results of previous studies to specific diseases, and it is considered that many other diseases should be studied at the national and sub-national levels.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3213-3230
• /
• 2016

Sensor node (SN) is a crucial part in any remote monitoring system. It is a device designed to monitor the particular changes taking place in its environs. Wireless sensor network (WSN) is a system formed by the set of wirelessly connected SNs placed at different geographical locations within a target region. Precise placement of SNs is appreciated, as it affects the efficiency and effectiveness of any WSN. The manual placement of SNs is only feasible for small scale regions. The task of SN placement becomes tedious, when the size of a target region is extremely large and manually unreachable. In this research article, an automated mechanism for fast and precise deployment of SNs in a large scale target region has been proposed. It uses an assembly of rotating cannons to launch the SNs from a moving carrier helicopter. The entire system is synchronized such that the launched SNs accurately land on the pre-computed desired locations (DLs). Simulation results show that the proposed model offers a simple, time efficient and effective technique to place SNs in a large scale target region.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.268-277
• /
• 2016

Load balancing is a significant technique to prolong a network's lifetime in sensor network. This paper introduces a hybrid approach named as Load Distributing Hybrid Routing Protocol (LDHRP) composed with a border node routing protocol (BDRP) and greedy forwarding (GF) strategy which will make the routing effective, especially in mobility scenarios. In an existing solution, because of the high network complexity, the data delivery latency increases. To overcome this limitation, a new approach is proposed in which the source node transmits the data to its respective destination via border nodes or greedily until the complete data is transmitted. In this way, the whole load of a network is evenly distributed among the participating nodes. However, border node is mainly responsible in aggregating data from the source and further forwards it to mobile sink; so there will be fewer chances of energy expenditure in the network. In addition to this, number of hop counts while transmitting the data will be reduced as compared to the existing solutions HRLBP and ZRP. From the simulation results, we conclude that proposed approach outperforms well than existing solutions in terms including end-to-end delay, packet loss rate and so on and thus guarantees enhancement in lifetime.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.259-267
• /
• 2016

In Wireless Sensor Network, various routing protocols were employed by our Research and Development community to improve the energy efficiency of a network as well as to control the traffic by considering the terms, i.e. Packet delivery rate, the average end-to-end delay, network routing load, average throughput, and total energy consumption. While maintaining network connectivity for a long-term duration, it's necessary that routing protocol must perform in an efficient way. As we discussed Optimized Link State Routing protocol between all of them, we find out that this protocol performs well in the large and dense networks, but with the decrease in network size then scalability of the network decreases. Whenever a link breakage is encountered, OLSR is not able to periodically update its routing table which may create a redundancy problem. To resolve this issue in the OLSR problem of redundancy and predict link breakage, an enhanced protocol, i.e. S-OLSR (More Scalable OLSR) protocol has been proposed. At the end, a comparison among different existing protocols, i.e. DSR, AODV, OLSR with the proposed protocol, i.e. S-OLSR is drawn by using the NS-2 simulator.

• Computers and Concrete
• /
• v.32 no.1
• /
• pp.27-44
• /
• 2023

The current study targets to apply the adaptive neuro-fuzzy inference system (ANFIS) for the estimation of the shear resistance offered by the externally bonded fiber-reinforced polymer (EB-FRP) U-jackets. A total of 202 groups of data cumulated from previous investigations, were employed for the development and evaluation of the ANFIS model. A relative appraisal between the ANFIS predictions and the results of experiments has shown that the assessments by current ANFIS model are in good concurrence with the latter. In addition, assessment of the accuracy of the ANFIS model was done by relating the ANFIS predictions with the forecasts of eight extensively used design guidelines. Based on the examination of various performance measures, it has been derived that the adequacy of the ANFIS model is better than the available guidelines. A parametric investigation has additionally been done to reconnoiter the influence of individual parameters as well as their combined effects on the shear contribution of EB-FRP. Based on the observations made from the parametric study, it has been witnessed that the ANFIS model has incorporated the effect of different parameters more competently than the considered design guidelines.

• Asia pacific journal of information systems
• /
• v.33 no.4
• /
• pp.1093-1117
• /
• 2023

The study aims to determine the impact of quality outcomes on behavior intentions in Financial Technology (FinTech) payment services. The study is focused on the development and testing of the impact of the SERVQUAL model on the TAM, i.e., Technology Acceptance Model for the measurement of the behavioral intention of users to use fintech payment services. The sample entails 578 specific survey responses from northern India from October to December 2022. The respondents were users of FinTech. The PLS-SEM technique was employed to explain the implementation process. Consequently, it discovered a significant relationship between the SERVQUAL models and the impact on behavioral intentions identified by TAM. The study will provide insight into the factors that impact the quality outcomes and adoption of Fintech payment services to the providers. The paper demystifies FinTech payment services in the range of perception of service quality outcomes and provides essential theories. The TAM model reflects the customer's sense of satisfaction, usefulness, and attitude. In contrast, the SERVQUAL model demonstrates the user's assessment of service quality outcomes such as quality, trust, security, and service quality positively affects behavioral intention in FinTech payment services.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1822-1829
• /
• 2024

The search for materials that serve as good shields for radiation has become very important in light of the increasing exposure to ionizing radiation in various vital sectors. The aim is to search for novel materials with better radiation shielding properties that are stable, nontoxic, and abundant and environment friendly. The solidstate reaction approach has been used to synthesize a few ceramics, including BaZr_XTi_1-XO₃, Ba_1-XLa_XTiO₃ and Ba_1-XLa_XZr_XTi_1-XO₃ (with x = 0.10) i.eBaZr_0.10Ti_0.90O₃ (BZT), Ba_0.90La_0.10TiO₃ (BLT), and Ba_0.90La_0.10Zr_0.10Ti_0.90O₃ (BLZT). The density of the prepared samples varies from 6.3471 to 11.6003 g/cm³. The X-ray diffraction technique, shows strong peaks to confirm the crystalline structure of prepared ceramic samples. Using the G-P fitting approach, the advanced radiation shielding parameters (build-up factor) have been evaluated in the photon energy region of 1.5 keV-15 MeV. It is observed from the results that exposure buildup factor (EBF) and energy absorption buildup factor (EABF) are maximum for BLZT and has the minimum value for BZT in the entire photon energy regime. The results of this work should be useful in radiation shielding applications such as in industry, medicine, and nuclear engineering.