• Korean Journal of Heritage: History & Science
• /
• v.42 no.4
• /
• pp.4-19
• /
• 2009

Though admitting that, in light of the recent archaeological trend, the excavation on relics of Sam-gama (a sort of kiln steaming the hemp) is increasingly reported, little efforts by far have been made not only to restore its traditional structure design but also to research hardly the change of hemp-steaming technologies in ages. In this regard, this paper shows the exploration of structural method and design as well as operability with regard to Sam-gut, traditional hemp-processing equipment that was recently reconstructed in Jungsun, Kangwon Province. Samgut, generally positioned at the waterside area, is an traditional device for steaming hemp to get bast fibers from the raw material of hemp, principally consisting of HWA-JIP(fire-place) to obtain steams by feeding fire ad Mong-got(boiling chamber) to make the hemp steamed after stacking. More specifically, thick round-logs were piled at the bottom of Hwajip prior to stacking stones around its circumferential area. When the timber positioned below gets burned with high temperature to heat stones existing in the upper side, waters then poured onto it after laying a bundle of grass and soil up to the boiled stones. If so, there generates hot vapor, which is conveyed to Monggot to steam the hemp. Functionally, it is of outstanding importance that Samgut is capable of producing high-temperature water vapors instantaneously under the intensive manpower, thus being constructed achievable for those purposes. The Samgut made by digging the ground is an instant facility that is closed after use. The remains, which were used to generate higher thermal power for steaming hemp, make it hard to excavate the historic traits because there left little vestiges in the soil, which means keen attention must be paid to find out the trace of Smgama relics. Future research stall be focused on collection of broader data regarding Samgut including technological review in extracting bas fibers from the hemp.

• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.551-558
• /
• 2006

Effects of Pb and $CO_2$ on soil microbial community associated with Pinus densiflora were investigated using community level physiological profiles (CLPP) and 16S rDNA PCR-denaturing gradient gel electrophoresis (DGGE) methods. Two-years pine trees were planted in Pb-contaminated soils and uncontaminated soils, and cultivated for 3 months in the growth chamber where $CO_2$ concentration was controlled at 380 or 760 ppmv. The structure of microbial community was analyzed in 6 kinds of soil samples (CA-0M : $CO_2$ 380 ppmv + Pb 0 mg/kg + initial, CB-0M : $CO_2$ 380 ppmv + Pb 500 mg/kg + initial, CA-3M : $CO_2$ 380 ppmv + Pb 0 mg/kg + after 3 months, CB-3M : $CO_2$ 380 ppmv + Pb 500 mglkg + after 3 months, EA-3M : $CO_2$ 760 ppmv + Pb 0 mg/kg + after 3 months, EB-3M : $CO_2$ 760 ppmv + Pb 500 mg/kg + after 3 months). After 3 months, the substrate utilization in the uncontaminated soil samples (CA-3M vs EA-3M) was not significantly influenced by $CO_2$ concentrations. However, the substrate utilization in the Pb-contaminated soil samples (CB-3M vs EB-3M) was enhanced by the elevated $CO_2$ concentrations. The results of principal component analysis based on substrate utilization activities showed that the structure of microbial community structure in each soil sample was grouped by Pb-contamination. The similarities of DGGE fingerprints were 56.3 % between the uncontaminated soil samples (CA-3M vs EA-3M), and 71.4% between the Pb-contaminated soil samples (CB-3M vs. EB-3M). The similarities between the soil samples under $CO_2$ 380 ppmv (CA-3M vs CB-3M) and $CO_2$, 760 ppmv (EA-3M vs EB-3M) were 53.3% and 35.8%, respectively. These results suggested that the structure of microbial community associated with Pinus densiflora were sensitively specialized by Pb-contamination rather than $CO_2$ concentration.

• (The)Study of the Eastern Classic
• /
• no.67
• /
• pp.379-418
• /
• 2017

Weoldae -which we can find inside Joseon palaces- is usually erected in front of important structures including the Main Hall(Jeongjeon, 正殿). There is no clear definition of its nature that we can find in official law codes or dynastic ritual manuals, and such records do not specify what kind of rules should be observed in creating them either. In illustrations of palaces such as and , Weoldae can be seen at structures such as the Main "Jeongjeon" Hall(正殿), Royal office(Pyeonjeon, 便殿), Royal Quarters(Jeongchim, 正寢), Queen's bedroom(Chimjeon, 寢殿), Quarters of the Crown Prince(Dong'gung, 東宮), and other structures. All these structures equipped with a Weoldae were related to special figures inside the royal family such as the king, the queen, the crown prince, and the crown-prince' son. These figures were literally above the law, and as such their treatment could not be defined by law. And these spaces were where they worked or rested while they lived, and where their posthumous tablets(Shinju, 神主) or portraits(Eojin, 御眞) were enshrined after they died. (When such spaces were used for latter purposes, they were designated either as 'Honjeon[魂殿, chamber of the tablet]' or 'Jinjeon[眞殿, hall of portrait']). Joseon was a Confucian dynasty with a strict social stratification system, and the palace structures reflected such atmosphere as well. We can see that structures described with Weoldae in and were structures which were more important than others that did not have a Weoldae. Among structures with Weoldae, the place which hosted most of the dynastic rituals was the Main Hall. In this Main Hall, the King swore an oath himself, passed the incense(香) himself during memorial services, and observed honoring ceremonies[Manbae-rye(望拜禮)] at the "Hwangdan"(皇壇) altar which was built to commemorate the three Ming Emperors. The so-called "Two Palaces[兩闕]" of Joseon shared a unique relationship in terms of their own Weoldae units and the rituals that were held there. In the early half of the Joseon dynasty period, Gyeongbok-gung(景福宮) and Dong'gweol(東闕) constituted the "Two palaces," but after the war with the Japanese in the 1590s during which the Gyeongbok-gung palace was incinerated, Dong'gweol and Seogweol(西闕) came to newly form the "Two palaces" instead. Meanwhile, Changdeok-gung(昌德宮) became the main palace[法宮], replacing the previous one which had been Gyeongbok-gung. In general, when a king moved to another palace, the ancestral tablets in the Honjeon chamber or the portrait in the Jinjeon hall would accompany him as well. Their presence would be established within the new palace. But king Yeongjo was an exception from that practice. Even after he moved to the Gyeong'hi-gung(慶熙宮) palace, he continued to pay visit to the Jinjeon Hall at Changdeok-gung. While he was positioned inside Gyeong'hi-gung, he did not manage the palace with Gyeonghi-gung as its sole center. He tried to manage other palaces like Changdeok-gung and Chang'gyeong-gung(昌慶宮) as well, and as organically as possible.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.118-135
• /
• 2022

The primary purpose of this study is to estimate the structure of Byeongpungsadaseok (屛風莎臺石) and Nanganseok (欄干石) in Geonwonneung (建元陵) and Heonneung (獻陵), which were built in the early of 15th century, based on the Annals of King Sejong. In addition, the ultimate purpose of this study is to reveal structural changes and their significance by comparing the differences with the contents of the dismantlement survey. Geonwonneung, Jereung(齊陵), and Heonneung were repaired at the same time in 1442, and the structural changes were the similar. The purpose of the repair in 1442 was to prevent water from flowing into the underground palace with smooth drainage. As a result of estimating the structure of Geonwonneung and Heonneung according to the records of the Annals of King Sejong, it was created in a very similar form to the Hyeonneung and Jeongneung of Goryeo. And it was clearly recognized that the Royal Tomb of Goryeo was followed. However, as the structure was improved in 1442, the unique characteristics of the Royal Tomb of the Joseon Dynasty were formed. First is the appearance of the Bokbuhyeong lime (覆釜形石灰, which is a convex roof on the Byeongpungsadaseok that serves to prevent rainwater from penetrating into the burial mound. It also plays a role in connecting and fixing the Manseok (滿石) and the Inseok (引石), which are the upper structures of the Sadaseok (莎臺石). Second, the Bakseok (薄石) between the nanganseok and the sadaseok has been transformed into the Sangseok (裳石) with a slope. This plays a role in protecting the inner stone chamber by expanding the length of the bakseok, which forms an overall slope, like the eaves of the roof. After both of these features were first attempted in 1442, they were applied to all Royal Tombs of the Joseon Dynasty and became unique features of these Royal Tombs.

• Progress in Medical Physics
• /
• v.23 no.1
• /
• pp.15-25
• /
• 2012

The aim of this study is to evaluate plan quality and dose accuracy for Volumetric Modulated Arc Therapy (VMAT) on the TG-119 and is to investigate the effects on variation of the selectable optimization parameters of VMAT. VMAT treatment planning was implemented on a Varian iX linear accelerator with ARIA record and verify system (Varian Mecical System Palo Alto, CA) and Oncentra MasterPlan treatment planning system (Nucletron BV, Veenendaal, Netherlands). Plan quality and dosimetric accuracy were evaluated by effect of varying a number of arc, gantry spacing and delivery time for the test geometries provided in TG-119. Plan quality for the target and OAR was evaluated by the mean value and the standard deviation of the Dose Volume Histograms (DVHs). The ionization chamber and $Delta^{4PT}$ bi-planar diode array were used for the dose evaluation. For treatment planning evaluation, all structure sets closed to the goals in the case of single arc, except for the C-shape (hard), and all structure sets achieved the goals in the case of dual arc, except for C-shape (hard). For the variation of a number of arc, the simple structure such as a prostate did not have the difference between single arc and dual arc, whereas the complex structure such as a head and neck showed a superior result in the case of dual arc. The dose distribution with gantry spacing of $4^{\circ}$ was shown better plan quality than the gantry spacing of $6^{\circ}$, but was similar results compared with gantry spacing of $2^{\circ}$. For the verification of dose accuracy with single arc and dual arc, the mean value of a relative error between measured and calculated value were within 3% and 4% for point dose and confidence limit values, respectively. For the verification on dose accuracy with the gantry intervals of $2^{\circ}$, $4^{\circ}$ and $6^{\circ}$, the mean values of relative error were within 3% and 5% for point dose and confidence limit values, respectively. In the verification of dose distribution with $Delta^{4PT}$ bi-planar diode array, gamma passing rate was $98.72{\pm}1.52%$ and $98.3{\pm}1.5%$ for single arc and dual arc, respectively. The confidence limit values were within 4%. The smaller the gantry spacing, the more accuracy results were shown. In this study, we performed the VMAT QA based on TG-119 procedure, and demonstrated that all structure sets were satisfied with acceptance criteria. And also, the results for the selective optimization variables informed the importance of selection for the suitable variables according to the clinical cases.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.4
• /
• pp.409-416
• /
• 2010

The use of oxy-fuel combustion and flue gas recirculation (FGR) for $CO_2$ reduction has been studied by many researchers. This study focused on the characteristics of oxy-fuel combustion and the effects of $CO_2$ addition from the point of view of oxygen feeding ratio (OFR) and the position of $CO_2$ addition in order to reproduce an FGR system with a triple concentric multi-jet burner. Oxy-fuel combustion was stable at all OFRs at a fuel flow-rate of 15 lpm, which corresponds to an equivalence ratio of 0.93; however, the structure and length of the flame varied at different OFRs. When $CO_2$ was added in oxy-fuel combustion, various stability modes such as stable, transient, quasistable, unstable, and blow-out were observed. The temperature in the combustion chamber decreased upon $CO_2$ addition in all conditions, and the maximum reduction in temperature was below 1800 K. $CO_2$ concentration with respect to height varied with the volume percent of $CO_2$ at the nozzle tip.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.6
• /
• pp.72-85
• /
• 2002

This study was conducted to investigate the germination rates and ground coverage rates of the 16 native wild flower, herbaceous, shrub and woody plants according to temperature and seeding timing for the revegetation and rehabilitation of the roadside slopes. Also, this study was conducted to suggest design criteria to select revegetation plants and to decide proper seed mixture for ecological restoration of the disturbed manmade slopes as a environmentally friendly construction. The results are summarized as follows. 1. Most of the plants germinated after 10~14 days. Woody plants germinated more slowly than wild flowers and herbaceous plants because of the hard seed. 2. Most of the plants showed the highest percentage of the germination rates under $15/25^{\circ}C$ temperature. The next was in order of under the $20/30^{\circ}C$ temperature, normal temperature(October) and $25/35^{\circ}C$ temperature. 3. At the chamber experiment, the Sorbaria sorbifolia var. stellipila showed the highest germination rates. Most of the native wild flowers germinated well and showed high germination rates under the various temperature. 4. As the field germination experiments, the seeding at August shows higher germination rates than that of the seeding at September, but showed lower surviving percentage of the germinated seedlings and lower ground coverage percentage than those of the seeding at September. After one year, Chionanthus retusus, Acer palmatum, Albizzia julibrissin are germinated and showed 10% coverage rates. So, they can be used as revegetation plants for the restoration works. 5. As seed mixture experiment, it was not effective only to increase the proportion of the ratio of the tree seeds, relatively high price, for making woody vegetation. It would be more successful to make vegetation structure by natural competition among wild flowers, shrubs and trees. 6. The excessive dominance of trees in revegetation works may destroy the lower layer of vegetation and it will be undesirable on the species diversity. It is more important to recover the species diversity of the plant community by seed mixture with the considering the germination, the growth characteristics and the correlation effect among revegetation plants. 7. To recover the manmade slopes quickly, increasing the ratio of the wild flower was recommended.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.5
• /
• pp.373-382
• /
• 2016

Painting or thermally sprayed metal coating is often used in corrosion protection of steel structures. In recently, duplex coating system which combines thermally sprayed metals with paint is selected as a new generic type of coatings on steel structures under the highly corrosive environments. In this study, the structural steel specimens were surface treated, thermally sprayed with zinc, zinc-15%aluminum alloy, aluminum and aluminum-5%magnesium alloy, and finally sealing or painted with acrylic urethane. And as a reference specimens, steel specimens were painted with acrylic urethane after surface treatment. Circular defects with 1.0, 3.0 and 5.0 mm in diameters and line defect with 2.0 mm width, which reach the steel substrate were created on all specimens. The specimens were exposed into an environmental testing chamber controlled by the ISO 20340, which is a laboratory cyclic accelerated exposure test condition of spraying/UV/low temperature, for up to 175 days. Based on the corrosion tests, corrosion deterioration from the initial defects were evaluated and weathering performance of the specimens are compared.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.186-196
• /
• 2009

Since it is difficult to extract a high flux ion beam directly at an energy of hyperthermal range ($1{\sim}100\;eV$), especially, lower than 50 eV, the ions should be neutralized into neutral particles and extracted as a neutral beam. A plasma source required to generate and efficiently transport high flux hyperthermal neutral beams should be easily scaled up and produce a high ion density (${\ge}10^{11}\;cm^{-3}$) even at a low working pressure (${\le}$ 0.3 mTorr). It is suggested that the required plasma source can be realized by Electron Cyclotron Resonance (ECR) plasmas with diverse magnetic field configurations of permanent magnets such as a planar ECR plasma source with magnetron field configuration and cylindrical one with axial magnetic fields produced by permanent magnet arrays around chamber wall. In both case of the ECR sources, the electron confinement is based on the simple mirror field structure and efficiently enhanced by electron drifts for producing the high density plasma even at the low pressure.

• International Journal of Automotive Technology
• /
• v.5 no.4
• /
• pp.221-238
• /
• 2004

Wall interactions of direct injection spray were investigated using laser-sheet imaging, shadowgraphy, wetted footprint and phase Doppler interferometry techniques. A narrow-cone high-pressure swirl injector is used to inject iso-octane fuel onto a plate, which has three different impact angles inside a pressurized chamber. Heated air and plate conditions were compared with unheated cases. Injection interval was also varied in the heated case to compare dry- and wet- wall impingement behaviors. High-speed macroscopic Mie-scattering images showed that presence of wall and air temperature has only minor effect on the bulk spray structure and penetration speed for the narrow-cone injector tested. The overall bulk motions of the spray plume and its spatial position at a given time are basically unaffected until a few millimeters before impacting the wall. The surface properties of the impact surface, such as the temperature, the presence of a preexisting liquid film also have a small effect on the amount of wetting or the wetted footprint; however, they have strong influence on what occurs just after impact or after a film is formed. The shadowgraph in particular shows that the plate temperature has a significant effect on vapor phase propagation. Generally, 10-20% faster horizontal vapor phase propagation is observed along the wall at elevated temperature condition. For impingement onto a preexisting film, more splash and evaporation were also observed. Contrary to some preconceptions, there is no significant splashing and droplet rebounding from surfaces that are interposed in the path of the DI gasoline spray, especially for the oblique impact angle cases. There also appears to be a dense spray front consists of large sac spray droplets in the oblique impact angle cases. The bulk of the spray is not impacted on the surface, but rather is deflected by it The microscopic details as depicted by phase Doppler measurements show that the outcome of the droplet impaction events can be significantly influenced. Only droplets at the spray front have high enough Weber numbers for wall impact to wet, splash or rebound. Using the sign of vertical velocity, the time-resolved downward droplets and upward droplets are compared. The Weber number of upward moving droplets, which seldom exceeds unity, also decreases as the impact angle decreases, as the droplets tend to impact less and move along the wall in the deflected spray plume.