• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.823-827
• /
• 2001

The AgInS$_2$epilayers with chalcopyrite structure grown by using a hot-wall epitaxy (HWE) method have been confirmed to be a high quality crystal. From the optical absorption measurement, the temperature dependence of the energy band gap on the AgInS$_2$/GaAs was derived as the Varshni's relation of Eg(T)=2.1365 eV-(9.89${\times}$10$\^$-3/ eV)T$^2$/(2930+T). After the as-grown AgInS$_2$/GaAs was annealed in Ag-,S-, and In-atmosphere, the origin of point defects of the AgInS$_2$/GaAs has been investigated by using the photoluminescence (PL) at 10 K. The native defects of V$\_$Ag/, V$\_$s/, Ag$\_$int/, and S$\_$int/ obtained from PL measurement were classified to donors or acceptors type. And, we concluded that the heat-treatment in the S-atmosphere converted the AgInS$_2$/GaAs to optical p-type. Also, we confirmed that the In in the AgInS$_2$/GaAs did net from the native defects because the In in AgInS$_2$did exist as the form of stable bonds.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.109-112
• /
• 1995

CuInS$_2$thin film was prepared by heat treatment at vacuum 10$\^$-3/ Torr of S/In/Cu stacked layer which was deposited by sequential. And so, the polycrystalline CuInS$_2$with chalcopyrite structure was well made at heat treatment temperature of 250$^{\circ}C$ and heat treatment time of 60 min. Single phase of CuInS$_2$was formed from Cu/In composition ratio of 0.84 to 1.3. p conduction type of CuInS$_2$thin film was appeared from Cu/In competition ratio of 0.99. The highest resistivity of CuInS$_2$with p type was 1.608${\times}$10$^2$$\Omega$cm at Cu/In composition ratio of 0.99 and The lowest resistivity was 5.587${\times}$10$\^$-2/$\Omega$cm at Cu/In composition ratio of 1.3.

• 한국재료학회지
• /
• 제14권10호
• /
• pp.737-742
• /
• 2004

$CuInSe_2$ (CIS) nanoparticles of chalcopyrite structure were directly synthesized by a solvothemal method in an autoclave with diethylamine as a solvent. A morphology change of the nanoparticles was observed as a function of reaction temperatures and times. Dense rod-type CIS nanoparticles with width of $5\sim10mm$ and length in the range of 30-80 nm were obtained at $180^{\circ}C$ for 36 hrs whereas spherical particles with diameter in the range of 5-10 nm were observed at $250^{\circ}C$ for 36 hrs. The formation of the rod-like nanoparticles in diethylamine, without double N-chelation, was explained by the Solution-Liquid-Solid (SLS) mechanism.

• 한국결정성장학회지
• /
• 제12권4호
• /
• pp.196-201
• /
• 2002

The $AgInS_{2}$ epilayers with a chalcopyrite structure grown using a hot-wall epitaxy method have been confirmed to be a high quality crystal. From the optical absorption measurements, a temperature dependence of the energy band gap on $AgInS_{2}/GaAs$ was found to be $Eg(T)=2.1365eV-(9.89{\times}10^{-3}eV)T^{2}/(2930+T)$. After the as-grown $AgInS_{2}/GaAs$ was annealed in Ag-, S-, and In-atmospheres, the origin of point defects of $AgInS_{2}/GaAs$ has been investigated by using photoluminescence measurements at 10 K. The native defects of $V_{Ag},\;V_{S},\;Ag_{int}$ and $S_{int}$ obtained from photoluminescence measurements were classified as donors or accepters. It was concluded that the heat-treatment in the S-atmosphere converted $AgInS_{2}/GaAs$ to an optical p-type. Also, it was confirmed that In in $AgInS_{2}/GaAs$ did not form the native defects because In in $AgInS_{2}$ did exist in the stable form.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1437-1439
• /
• 1996

In this paper, investigations on a three stage processing technique involving the co-evaporation of In-Se, Cu-Se and In-Se in this order at different deposition condition was undertaken. At first stage, we obtained good $In_{2}Se_{3}$ films by In-Se coevaporation. $In_{2}Se_{3}$ films show smooth and dense structure. And ration of In:Se was 2:3 $CulnSe_2$ thin films deposited by three stage process have shown strong adhesion on Mo coated glass substrates and good morphological properties suitable device fabrication. XWD spectra show single phase chalcopyrite $CulnSe_2$ films with strong orientation in the 112 plane. Resistivity of $CulnSe_2$ thin films was about $5{\times}10^{5}\;{\Omega}{\cdot}cm$. Surface morphology of CdS/$CulnSe_2$/Mo films was very good because of no pin holes.

• 자원환경지질
• /
• 제25권3호
• /
• pp.297-316
• /
• 1992

The Daebong gold-silver deposits is located in 8 km southwest of Cheongyang, Chungcheongnam-Do, Republic of Korea. The gold-silver-bearing hydrothermal quartz veins was formed within the Precambrian metasediments of Gyeonggi massif. Ore minerals occur as mainly of pyrite, sphalerite (0.78~6.19 wt.% Cd), galena, pyrrhotite and minor amounts of chalcopyrite, arsenopyrite, magnetite, ilmenite, chalcocite, electrum (55.00~89.55 wt.% Au) and argentite. The gangue minerals are quartz, calcite, chlorite, K-feldspar, biotite. Wall-rock alterations such as chloritization, silicification, pyritization, carbonatization and sericitization can be observed near the quartz veins. According to the mineral paragenetic sequence based on vein structure and mineral assemblages, three stage mineralizations can be recognized. Fluid inclusion, sulfur isotope and thermodynamic data show that the ore minerals were dominantly deposited at the between 388 and $204^{\circ}C$ from fluids with salinities of 8.1~0.3 wt.% equivalent NaCl, and sulfur isotope value 4.84 to 6.40 per mil of sulfides indicates igneous sources of sulfur in the hydrothermal system and fluid inclusion salinity data suggest that thermal fluids may have magmatic origin with some degree mixing of meteoric water.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권7호
• /
• pp.382-387
• /
• 2000

The $CdAl_2S_4 and CdAl_2S_4 : Co^{2+}$ single crystals were grown by the chemical transport reaction method using iodine as a transport agent. The $CdAl_2S_4 and CdAl_2S_4 : Co^{2+}$single crystals were crystallized into a defect chalcopyrite structure. The optical energy gap of the $CdAl_2S_4 and CdAl_2S_4 : Co^{2+}$ single crystals was found to be 3.377 eV and 2.924 eV, respectively, at 300 K. Blue emission with peaks in 456nm~466nm at 280K was observed in the $CdAl_2S_4$ single crystal. Optical absorption and emission peaks due to impurities in the $CdAl_2S_4 Co^{2+}$ single crystal were observed and described as originating from the electron transition between energy levels of the $Co^{2+} ion sited at the Td symmetry point.

• Transactions on Electrical and Electronic Materials
• /
• 제5권2호
• /
• pp.50-54
• /
• 2004

The AgInS$_2$epilayers with chalcopyrite structure grown by using a hot-wall epitaxy (HWE) method have been confirmed to be a high quality crystal. From the optical absorption measurement, the temperature dependence of the energy band gap on the AgInS$_2$/GaAs was derived as the Varshni's relation of E$\_$g/(T) = 2.1365 eV - (9.89${\times}$10$\^$－3/ eV/K) T$^2$/(2930＋T eV). After the as-grown AgInS$_2$/GaAs was annealed in Ag－, S－. and In-atmosphere, the origin of point defects of the AgInS$_2$/GaAs has been investigated by using the photoluminescence (PL) at 10 K. The native defects of $V_{Ag}$, $V_s$, $Ag_{int}$, and $S_{int}$ obtained from PL measurement were classified to donors or accepters type. And, we concluded that the heat-treatment in the S- atmosphere converted the AgInS$_2$/GaAs to optical p-type. Also, we confirmed that the In in the AgInS$_2$/GaAs did not form the native defects because the In in AgInS$_2$did exist as the form of stable bonds.

• 한국재료학회지
• /
• 제20권1호
• /
• pp.12-18
• /
• 2010

$CuInSe_2$ (CIS) thin films were electrodeposited on Mo-coated glass substrates in acidic solutions containing $Cu^{2+}$, $In^{3+}$, and $Se^{4+}$ ions, depending on deposition parameters such as deposition potential (-0.4 to -0.8 V[SCE]) and pH (1.7 to 1.9). The influences of PH and deposition potential on the atomic composition of Cu, In, and Se in the deposited films were observed. The best chemical composition, approaching 1:1:2 atomic ratio for the elements, was achieved at -0.5 V (SCE) and pH 1.8. The as-deposited films showed low crystallinity and were annealed at 300 to $500^{\circ}C$ for 30 min to improve crystallization. The surface morphologies, microstructures, and crystallographic structures of the annealed films as well as the as-deposited films were analyzed with AFM, SEM, and XRD. The defects of spherical particles appeared on the surfaces of CIS thin films in the as-deposited state and decreased in size and number with increasing annealing temperatures. Additionally, the crystallization to chalcopyrite structure and surface roughness (Ra) of the as-deposited thin films were improved with the annealing process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.88-93
• /
• 2002

$Zn_{0.5}Cd_{0.5}Al_{2}Se_{4}$ and $Zn_{0.5}Cd_{0.5}Al_{2}Se_{4}:Co^{2+}$ + single crystals were grown by CTR method. The grown single crystals have defect chalcopyrite structure with lattice constant a= 5.5966A. c= 10.8042${{\AA}}$ for the pure. a= 5.6543${{\AA}}$. c= 10.8205${{\AA}}$ for the Co-doped single crystal. respectively. The optical energy band gap was given as indirect band gap. The optical energy band gap was decreased according to add of Co-impurity. Temperature dependence of optical energy band gap was fitted well to the Varshni equation. From this relation. we can deduced the entropy. enthalpy and heat capacity. Also. we can observed the Co-impurity optical absorption peaks assigned to the $Co^{2+}$ ion sited at the $T_d$ symmetry lattice and we consider that they were attributed to the electron transitions between energy levels of ions.