• 한국산업융합학회 논문집
• /
• 제5권4호
• /
• pp.385-390
• /
• 2002

An efficient synthesis of spiroannulated dihydrofurans is achieved from 1,3-dicarbonyl compounds and exocyclic alkenes in the presence of cerium ammonium nitrate(IV) in moderate yields. In the case of entries 3-9, as a single product was seen. Especially, reaction of 15 with methylenecyclohexane afforded the two regioisomeric cyclo adducts 21 and 22. The structures of these adducts were confirmed by IR and NMR-Spectra.

• 분석과학
• /
• 제14권6호
• /
• pp.494-498
• /
• 2001

크로메이트를 대체하기 위한 새로운 표면처리 화합물로서 cerium nitrate를 사용하고 Al도금강판에 적용하였을 때, 그 표면의 특성을 정밀하게 분석하였다. 그 결과, cerium nitrate로 처리된 Al도금강판의 표면층에서 cerium은 (+4) 산화 상태와 (+3) 산화 상태의 혼합된 형태로 존재하며 각각의 상대적 비율은 57 % 및 43 %인 것으로 나타났다. 이러한 cerium 화합물의 피막은 Al도금층의 자연산화막과 더불어 도금강판의 표면에 보호 피막을 형성하여 Al도금강판의 표면 부식을 방지하게 된다.

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.101-107
• /
• 2013

재생 세륨 전구체로부터 수산화세륨($Ce(OH)_3$), 염화세륨($CeCl_3{\cdot}nH_2O$), 탄산세륨($Ce_2(CO_3)_3{\cdot}8H_2O$) 및 산화세륨($CeO_2$)을 합성하고 Ultra-sonication을 통해 나노입자의 산화세륨(IV)을 제조하였다. 폐 유리연마재로부터 정제한 약 99 wt% 재생 세륨 분말을 출발물질로 하여 황산침출과 황산나트륨의 첨가조건을 통해서 황산나트륨세륨 화합물($CeNa(SO_4)_2$)을 합성하였다. 또한 황산나트륨세륨 화합물과 수산화나트륨 수용액 첨가량 비의 조건을 달리하여 수산화세륨을 제조하였으며 염산의 첨가량에 따라 염화세륨을 합성하였다. 연속적인 합성공정으로 침상형의 탄산세륨을 합성한 후 하소와 분산을 통해서 평균 30~40 nm의 산화세륨(IV)을 합성하였다.

• Corrosion Science and Technology
• /
• 제3권1호
• /
• pp.6-13
• /
• 2004

The effect of inhibitors on the electrochemical behavior and the stress corrosion cracking resistance of Alloy 600(UNS N06600) was evaluated in 10% sodium hydroxide solution at $315^{\circ}C$. The specimens of a C-ring type for stress corrosion cracking test were polarized at 150 mV above the corrosion potential for 120 hours with and without inhibitors such as titanium oxide, titanium boride and cerium boride. The chemical compositions of the films formed on the crack tip in the C-ring specimens were analyzed using a scanning Auger electron spectroscopy. The cerium boride, the most effective, was observed to decrease the crack propagation rate more than a factor of three compared with that obtained in no inhibitor solution. It was found that the changes of the active-passive transition potentials and the film compositions were related to the resistance to stress corrosion cracking in high temperature caustic solution.

• Nuclear Engineering and Technology
• /
• 제34권1호
• /
• pp.80-89
• /
• 2002

A laboratory investigation of the behavior of radioactive metals under the various waste combustion atmospheres was conducted to predict the parameters that influence their partitioning behavior during waste incineration. Neodymium, samarium, cerium, gadolinium, cesium and cobalt were used as non-radioactive surrogate metals that are representative of uranium, plutonium, americium, curium, radioactive cesium, and radioactive cobalt, respectively. Except for cesium, all of the investigated surrogate metal compounds converted into each of their stable oxides at medium temperatures from 400 to 90$0^{\circ}C$, under oxygen- deficient and oxygen-sufficient atmospheres (0.001-atm and 0.21-atm $O_2$). At high temperatures above 1,40$0^{\circ}C$, cerium, neodymium and samarium in the form of their oxides started to vaporize but the vaporization rates were very slow up to 150$0^{\circ}C$ . Inorganic chlorine (NaCl) as well as organic chlorine (PVC) did not impact the volatility of investigated Nd$_2$O$_3$, CoO and Cs$_2$O. The results of laboratory investigations suggested that the combustion chamber operating parameters affecting the entrainment of particulate and filtration equipment operating parameters affecting particle collection efficiency be the governing parameters of alpha radionuclides partitioning during waste incineration.

• Journal of Magnetics
• /
• 제4권3호
• /
• pp.102-106
• /
• 1999

Ce exhibits the intermediate valence (IV) state both as an element and in its compounds. In the present review characteristic behavior of the materials showing the IV state are described. Then the methods of producing this state : the application of the external pressure, temperature and magnetic field as well as the alloying are being discussed. An identification of the IV state is frequently not a simple goal and the best results can be obtained using a combination of various independent methods. Particular attention is paid to the X-ray spectroscopy, lattice parameters and the magnetic properties. As the examples of the IV state in the Ce compounds the properties of following materials are reported : CeRhSb, $CeCu_5In_7, CeAg_6In_6, Sc_{1-x}Ce_xFe_4Al_8 $and for comparison Sc1-xYbxFe4Al8.

• 한국결정성장학회지
• /
• 제27권1호
• /
• pp.18-21
• /
• 2017

본 연구에서는 homogeneous precipitation method를 통하여 구형의 단분산(monodispersed) YAG : $Ce^{3+}$를 합성했다. 단분산 YAG : $Ce^{3+}$의 전구체를 합성하는 과정에서 aluminum ion들이 먼저 석출되어 aluminum 화합물을 형성하고 후에 yttrium 화합물들이 aluminum 화합물들의 표면에서 석출된다. 합성된 전구체를 파우더형태로 얻기 위해 건조과정을 거치는데, oven에서 건조했을 때 보다 동결건조기에서 건조했을 때 비교적 구형의 단분산 YAG : $Ce^{3+}$ 입자를 얻을 수 있었다. 하소 과정에서 공정을 진행하는 온도로서 $1100^{\circ}C$와 $1200^{\circ}C$를 비교해 보았다. 실험 결과 $1200^{\circ}C$의 온도로 상압에서 6시간 동안의 하소 과정을 진행하였을 때 400~500 nm 입자크기를 가진 단분산된 구형의 나노 YAG : $Ce^{3+}$ 입자가 합성되었다.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.766-771
• /
• 2008

We fabricated single cells with a cathode consisting of a $LaNi_{0.6}Fe_{0.4}O_3-Ce_{0.8}Sm_{0.2}O_{1.9}$ composite (LNF-S20DC composite) active layer and an LNF current collecting layer on a ${0.89ZrO_2}-{0.10Sc_2}{O_3}-0.01{Al_2}{O_3}$ electrolyte sheet. The cathode layers were prepared by the screen-printing method. The cathode properties of these cells were measured by the AC impedance method at $800^{\circ}C$. The cathodes with the ceria-LNF composite active layer exhibited high power performance prior to current loading. We investigated the influence of the mixture ratio of LNF and S20DC on the cathodes properties. The Sm in the ceria particles of the composite cathode was substituted with other rare-earth elements. Cathodes with Pr and Gd co-doped ceria in the active layer provided the better performance than those with Sm- or Gd-doped ceria.

• 한국산업보건학회지
• /
• 제26권3호
• /
• pp.237-252
• /
• 2016

Objectives: This study was conducted in order to improve the current understanding of rare earths(RE) and to provide supporting data for establishing occupational health policies by reviewing the toxicological data and issues caused by the use of RE compounds in various fields. Methods: To evaluate the potential toxicity of RE from the viewpoint of occupational health, we summarized extensive reviews of relevant articles in the toxicology(animals and cells), occupational health and safety, and epidemiologic literature. Results: Although occupational RE exposure occurs extensively from ore mining and refining to end users in various industrial applications, epidemiologic study has not been performed among workers up to now. Bioaccumulation and adverse effects of RE have also been mentioned in ore mining regions and nearby residences, but safety standards for each process are insufficient. Moreover, because new commercial recycling technology will soon be applied to various industries, regulation and policies are needed for preventing abuse of recycling. In the results of animal toxicity for a few REs(mostly cerium, lanthanum, and gadolinium), toxicities of liver, lung, blood, and the nervous system were identified due to oxidative stress, but study of long-term RE exposure is required. Understanding the dual effect for RE and discovery of biomarkers pose a scientific challenge in further mechanism studies. Conclusions: In the future, additional hazard evaluation based on animal experiments is required, alongside continuous research for developing analytical methods and discovering biomarkers. Finally, RE occupational health and safety management needs to be integrated into the sustainable use of these materials.

• 한국전기전자재료학회논문지
• /
• 제14권9호
• /
• pp.695-699
• /
• 2001

Cerium dioxide (CeO$_2$) was used as the intermediate layer between the ferroelectric thin film and Si substrate in a metal-ferroelectric-semiconductor field effect transistor (MFSFET), to improve the interface property by preventing the interdiffusion of the ferroelectric material and the Si substrate. In this study, CeO$_2$ thin films were etched with a CF$_4$/Ar gas combination in inductively coupled plasma (ICP). The maximum etch rate of CeO$_2$ thin films was 270$\AA$/min under CF$_4$/(CF$_4$+Ar) of 0.2, 600 W/-200V, 15 mTorr, and $25^{\circ}C$. The selectivities of CeO$_2$ to PR and SBT were 0.21, 0.25, respectively. The surface reaction in the etching of CeO$_2$ thin films was investigated with x-ray photoelectron spectroscopy (XPS). There is a chemical reaction between Ce and F. Compounds such as Ce-F$_{x}$ remains on the surface of CeO$_2$ thin films. Those products can be removed by Ar ion bombardment. The results of secondary ion mass spectrometry (SIMS) were consistent with those of XPS. Scanning electron microscopy (SEM) was used to examine etched profiles of CeO$_2$ thin films. The etch profile of over-etched CeO$_2$ films with the 0.5${\mu}{\textrm}{m}$ line was approximately 65$^{\circ}$.>.