• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.511-515
• /
• 2000

The effect of Ba2+ ion dissolution with different pH and amount of PAA on microstructural changes of green and sintered bodies and its electrical properties was studied in aqueous nano-size BaTiO3 slurry system. The dissolution of Ba2+ was least at strong base, pH 10.8 and by addition of amount of 0.15 wt% PAA. The green body with the lowest of dissolution of Ba2+ at pH 10.8 and 0.15 wt% PAA had minimum values of average pore size, 40nm and shown high increase of sintered density. The compact sintered at 125$0^{\circ}C$ for 2 hr with highest Ba2+ dissolution had low density and dielectric constant due to abnormal grian growth. However, the sintered body with the lowest Ba2+ dissolution had high sintered density and then shown high dielectric constant.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1173-1181
• /
• 1997

Effects of particle size distribution of alumina ceramics on behaviors of tape casting were investigated with emphases on the rheological characteristic of slurry, green density, green sheet strength, and sintering density. For the control of particle size distribution of alumina, the commercial grade low soda alumina, which had different mean particle size of 3.58 ${\mu}{\textrm}{m}$ and 0.42 ${\mu}{\textrm}{m}$, were chosen and blended together. As results, the mixing of 80 wt% fine powder and 20 wt% coarse powder(designated to FC20) led to the increase of packing density and strength of green sheet, and made it easy to handle during processing without lowering of sintering density. Besides, the pseudoplastic behavior of slurry decreased with increase of the fraction of coarse alumina powder.

• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1276-1284
• /
• 1996

Ultrafine calcim carbonate powders with the size of 0.05~0.1 ${\mu}{\textrm}{m}$ and the calcite phase were prepared by the nozzle spouting method which was conducted by spouting calcium hydroxide slurry in reactor filled with CO2 gas. Well dispersed ultra-fine particles were synthesized in condition of high Ca(OH)2 concentration of the slurry ( 0.5wt%) synthesized calcium carbonate powder was shown the large particle size with agglo-meration.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.394-398
• /
• 1997

Mn-Zn ferrite powders were prepared by alcoholic dehydration, using coprecipitation method. Then the effects of organic dispersant and polymeric binder concentration on stability and casting of slurry were discussed. Citric acid, the organic dispersant and polyvinylacohol(PVA), the non-ionic binder, were selected as additives of slurry. With variation of concentration of water, citric acid and polyvinylalcohol(PVA), optimum forming conditions were determined from viscosity and density. To compare with dry process, density and microstructure of sintered body formed by uniaxial die pressing were observed.

• 한국세라믹학회지
• /
• 제45권4호
• /
• pp.204-207
• /
• 2008

This paper presents a new process for producing SiC fiber-SiC matrix(SiC/SiC) composites by reaction sintering. The processing strategy for the fabrication of the SiC/SiC composites involves the following: (1) infiltration of the SiC fiber fabric using a slurry consisting of Si and C precursors, (2) stacking the slurry-infiltrated SiC fiber fabric at room temperature, (3) cross-linking the stacked composites, (4) pyrolysis of the stacked composites, and (5) hot-pressing of the pyrolyzed composites. It was possible to obtain dense SiC/SiC composites with relative densities of >96% and a typical flexural strength of ${\sim}400$ MPa.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.1088-1090
• /
• 2002

In this study, a new processing route of barrier ribs for the plasma display panels was attempted. A slurry containing ceramic powders for the barrier ribs, binder, hardener, and other additives, was molded into a PDMS mold by capillary infiltration process. The molded slurry was cured prior to mold removal. It was demonstrated that the process can fabricate successfully the cell type barrier ribs of PDP.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 추계학술발표대회 및 제11회 신소재 심포지엄
• /
• pp.15.2-15.2
• /
• 2006

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 추계 학술발표회 논문집
• /
• pp.197-204
• /
• 1999

VOC(volatile organic compound)는 도료제조, 자동차, 선박의 도색, 인쇄, 염색 공정에서 주로 발생하는 휘발성 유기화합물로서 호흡기로 들어가면 중추신경 등 주요 기관의 장애를 일으킬 수 있으며, 질소화합물과 광화학반응을 일으켜 오존을 유발하는 위험물질이다. 정부에서는 1991년 대기환경보존법을 제정하여 유기용제의 배출을 규제하고 있고, 이 법에 따라 금년부터 석유화학정제업, 저유소에 VOC 방지시설을 의무적으로 설치해야 한다.(중략)

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 춘계총회 및 연구발표회 초록집
• /
• pp.44.1-44.1
• /
• 2004

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 춘계총회 및 연구발표회 초록집
• /
• pp.44.2-44.2
• /
• 2004