• 한국결정성장학회지
• /
• 제28권3호
• /
• pp.123-129
• /
• 2018

고온 열처리 후에도 안정적인 발색 효과를 가지는 디지털 4원색(cyan, magenta, yellow, black; CMYK)의 세라믹 잉크를 활용한 세라믹 잉크젯 프린팅 기술은 다양한 제품의 디지털 이미지를 정확하고 빠르게 인쇄 가능하다는 장점을 가지고 건축 및 세라믹 산업 분야에서 기존 공정을 빠르게 대체하고 있다. 세라믹 잉크젯 프린팅 기술은 무기 안료의 분산 안정성과 함께 적절한 점도와 표면 장력을 필요로 하며 기존에는 이러한 요구조건에 부합하는 유기용매 기반의 잉크가 주로 사용되어져 왔으나 최근에는 VOCs가 발생하지 않는 환경친화적인 세라믹 잉크 소재에 대한 관심이 커지고 있다. 본 연구에서는 $CoAl_2O_4$ cyan 발색 무기안료와 alumino boro-silicate 유리 분말을 사용하여 친환경적인 수계 세라믹 복합잉크를 합성하고, 수계 시스템에서의 유변학적 물성과 분산성을 최적화하여 잉크젯 프린팅 공정에서의 토출성 및 프린팅 특성에 대해 연구하였다. 그 결과, 합성된 수계 세라믹 복합잉크는 점도 및 표면장력 조절을 통해 satellite drop이 발생하지 않는 토출 거동을 보였으며, 유리 기판 위에서도 높은 접촉각으로 인해 잉크 퍼짐 현상이 최소화되며 프린팅되는 것을 확인하였다.

• 한국재료학회지
• /
• 제29권10호
• /
• pp.639-646
• /
• 2019

Ink-jet printing is a manufacturing process technology that directly prints a digitalized design pattern onto a substrate using a fine ink jetting system. In this study, environmentally friendly yellow aqueous ceramic ink is synthesized by mixture of distilled water, yellow ceramic pigment and additives for ink-jet printing. The graft polymer, which combines electrostatic repulsion and steric hindrance mechanism, is used as a surfactant for dispersion stability of aqueous ceramic ink. Synthesized ceramic ink with graft polymer surfactant shows better dispersion stability than did ceramic ink with PAA surfactant; synthesized ink also shows desirable ink-jet printability with the formation of a single ink droplet during printability test. Finally, ceramic ink printed on glass substrate and ceramic ink with graft polymer surfactant shows a high contact angle without surface treatment on glass substrate. Consequently, it is confirmed that the ceramic ink with graft polymer surfactant can achieve high printing resolution without additional surface treatment process.

• 한국세라믹학회지
• /
• 제44권5호
• /
• pp.160-165
• /
• 2007

This research studied the most suitable synthesis condition of mineral pigments of black spinel, which have a stable chromogenic characteristic also ata high temperature of $1400^{\circ}C$ (it is not currently producedin the country) to meet not only functionality of ceramics but also an individual's aesthetic. It was synthesized by the plastic synthetic method on the basis of basic formation of $Fe_2O_3,\;Cr_2O_3$, Quartz, Kaolin, CoO, $MnO_2$, and plasticity was made at $1500^{\circ}C,\;1550^{\circ}C,\;1600^{\circ}C,\;1650^{\circ}C$. We researched the most suitable condition of plasticity and composition which make crystallization of spinel system and chromogenic characteristic close to black in every composition. And for the experiment of application to Zirconia, after adding synthesized pigments to Zirconia and plasticizing them, we analyzed their color and property of matters. The most suitable synthesis conditions of mineral pigments of black spinel system require composition of $Fe_2O_3-32.01%,\;Cr_2O_3-30.47%$, Quartz-9.66%, Kaolin-18.53%, CoO-3.71%, $MnO_2-5.62%$ and condition of plasticity kept for 1 h at $1600^{\circ}C$. When we added pigments synthesized in this way to Zirconia with 5 wt% and plasticized them at $1410^{\circ}C$, the result was that the degree of $strength-32.6kgf/mm^2$, absorptance-0.108%, $luminosity-L^*:37.54,\;color-a^*:1.31,\;b^*:2.61$ and their use suited for artificial jewelry or decoration Zirconia goods.

• 한국세라믹학회지
• /
• 제45권4호
• /
• pp.214-219
• /
• 2008

The zirconia ceramics are widely used because of their excellent mechanical properties. Recently, many researches to make a colored zirconia was achieved to satisfy the individual aesthetic requirements. In this study, the synthesis of black-color spinel-based inorganic pigments which are stable above $1400^{\circ}C$ and the fabrication of black-colored zirconia using the synthesized pigments are investigated. Inorganic pigments which have spinel structure and near black color were synthesized by a solid state reaction method using a $Fe_2O_3,\;Cr_2O_3$, CoO and NiO powder as a starting materials at $1600^{\circ}C$. Most of synthesized pigments were black colored spinel phases and single spinel phase was successfully synthesized at the composition range of $Cr_2O_3:25{\sim}35%,\;Fe_2O_3:45{\sim}55%$, CoO:20% and NiO:$6{\sim}10%$. The black-colored zirconia was fabricated at $1410^{\circ}C$ with the 5 wt% synthesized pigments and their properties were evaluated. The results showed that the strength value was more than 848 MPa, absorption rate was 0.1%, the brightness of color was $L^*:40{\sim}42$, the tone of color is $a^*:0.2{\sim}0.8$ and $b^*:-1.1{\sim}2.4$. As a result, the black-colored zirconia was suitable for a artificial jewelry or decoration zirconia goods.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1998년도 한국생물과학협회 학술발표대회
• /
• pp.368.2-368
• /
• 1998

No Abstract, See Full Text

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.137.2-137
• /
• 2003

• 한국결정성장학회지
• /
• 제26권5호
• /
• pp.181-187
• /
• 2016

본 연구에서는 납이나 크롬이 함유되지 않은 친환경적인 물질의 새로운 주황 무기 안료를 개발하고자 하였다. 고상반응법을 이용하여 LPG와 Air를 이용한 환원분위기에서 $TiO_2-SnO-ZnO$계 주황색 무기 안료를 합성하였다. 합성 된 안료들의 특성을 분석하기 위하여 표색계 값인 $L^*a^*b^*$ 값을 측정 후, XRD를 이용하여 결정 상을 분석하였고, SEM을 이용하여 미세구조 관찰하였으며, XPS를 이용하여 원소들의 산화가 상태를 분석하였다. 고상 반응법으로 합성 후 열처리한 $TiO_2-SnO-ZnO$ 안료는 yellow에서 orange-red 사이의 색을 가진다. $TiO_2-SnO-ZnO$ 안료의 결정상 분석 결과, 5가지의 결정상이 혼재하는 것을 볼 수 있는데, $SnO_2$가 cubic과 tetragonal 구조 중 어떤 결정 구조를 가지는지가 발색의 가장 중요한 요인으로 작용하는 것을 확인하였다. XPS를 이용하여 원소들의 산화가 상태를 분석한 결과, $Sn^{4+}$의 비율이 높을수록 안료가 rYR에 가까운 색을 가지는 것을 확인할 수 있다.

• 한국세라믹학회지
• /
• 제47권4호
• /
• pp.302-307
• /
• 2010

This study aims to synthesize emerald-green malayaite pigments using $CaCO_3$, $SiO_2$, $SnO_2$ and $V_2O_5$. For this purpose, the optimum composition is $CaV_{0.25}Sn_{0.687}SiO_5$ and heating condition is at $1250^{\circ}C$ for 6 h of soaking time. The samples were characterized by X-ray diffraction (XRD), the Fourier Transform Infrared Spectrometers(FT-IR), the Raman Spectrometer, Scanning Electron Microscope(SEM) and the UV/Vis spectroscopy. The substituted V ion for Sn was observed to be quadrivalence. The analytical results of the synthesized pigment showed the tetragonal crystal, a typical form of Malayaite, and the particle size to be approximately $5{\sim}10\;{\mu}m$. The color in lime glaze added 12 wt% pigment was emerald green, and CIE Lab parameters are $L^*=67.73$, $a^*=-12.39$ and $b^*=9.28$.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.454-457
• /
• 2011

We report the preparation of nanocrystalline cobalt ferrite, $CoFe_2O_4$, particles using recycled $Co_3O_4$ and their surface coating with silica using micro emulsion method. Firstly, the $Co_3O_4$ powders were separated from waste cemented carbide with acid-base chemical treatment. The cobalt ferrite nanoparticles with the size 10 nm are prepared by thermal decomposition method using recycled $Co_3O_4$. $SiO_2$ was coated onto the $CoFe_2O_4$ particles by the micro-emulsion method. The $SiO_2$-coated $CoFe_2O_4$ particles were studied their physical properties and characterized by X-ray diffraction (XRD), high resolution-transmission electron microscopy (TEM) analysis and CIE Lab value.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.589-596
• /
• 2019

Pigments with minute particle sizes, such as carbon black (CB) and pigment red 48:2 (P.R.48:2), are the most important types of pigment and have been widely used in many industrial applications. However, minute particles have large surface areas, high oil absorption and low surface energy. They therefore tend to be repellent to the vehicle and lose stability, resulting in significant increases in viscosity or reaggregation in the vehicle. Therefore, finding the best way to improve the dispersion properties of minute particle size pigments presents a major technical challenge. In this study, minute particle types of CB and P.R.48:2 were treated with nitrogen gas plasma generated via radio frequency-plasma enhanced chemical vapor deposition (RF-PECVD) to increase the dispersion properties of minute particles in deionized (DI) water. The morphologies and particle sizes of untreated and plasma treated particles were evaluated using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The average distributions of particle size were measured using a laser particle sizer. Fourier transform infrared spectroscopy was carried out on the samples to identify changes in molecular interactions during plasma processing. The results of our analysis indicate that N2 plasma treatment is an effective method for improving the dispersibility of minute particles of pigment in DI water.