• Korean Journal of Organic Agriculture
• /
• v.17 no.2
• /
• pp.171-191
• /
• 2009

Although many local governments are supporting the environment-friendly regional agriculture(hereafter EFRA), the EFRA is not wildly extended since the marketing and consumption of the environment-friendly agricultural products are still limited. This study aims at finding out the new development source of Korean agriculture and strategies for establishing regional agriculture. For these purposes, Sunchon-si cases of EFAP development are introduced and the functions and roles of bodies in charge of regional agriculture are looked over. In order to establish the EFRA, production, processing and consumption needs to be intimately linked all together. As preconditions for developing the EFRA, four points should be satisfied. Firstly, production organizations need to be built and stabilized for developing the EFRA and consumers' organizations and partnership are to be formed. Secondly, the government should support for building consumers' organization. Thirdly, social consensus for developing the EFRA needs to be formed. And finally with the appropriate local and central governmental support the partnership among producers, consumers, and government should be formed.

• Computers and Concrete
• /
• v.12 no.4
• /
• pp.537-552
• /
• 2013

Computation of flexural ductility of reinforced concrete beam sections has been proposed by taking into account strain rate sensitive constitutive behavior of concrete and steel, confinement of core concrete and degradation of cover concrete during load reversal under earthquake loading. The estimate of flexural ductility of reinforced concrete rectangular sections has been made for a wide range of tension and compression steel ratios for confined and unconfined concrete at a strain rate varying from $3.3{\times}10^{-5}$ to 1.0/sec encountered during normal and earthquake loading. The parametric studies indicated that flexural ductility factor decreases at increasing strain rates. Percentage decrease is more for a richer mix concrete with the similar reinforcement. The confinement effect has marked influence on flexural ductility and increase in ductility is more than twice for confined concrete (0.6 percent volumetric ratio of transverse steel) compared to unconfined concrete. The provisions in various codes for achieving ductility in moment resisting frames have been discussed.

• Structural Engineering and Mechanics
• /
• v.64 no.5
• /
• pp.557-566
• /
• 2017

Fiber reinforced polymer (FRP) sheets are the most efficient structural materials in terms of strength to weight ratio and its application in strengthening and retrofitting of a structure or structural elements are inevitable. The performance enhancement of structural elements without increasing the cross sectional area and flexible nature are the major advantages of FRP in retrofitting/strengthening work. This research article presents a detailed study on the inelastic response of conventional and retrofitted Reinforced Concrete (RC) frames using Carbon Fibre Reinforced Polymers (CFRP) and Glass Fiber Reinforced Polymers (GFRP) subjected to quasi-static loading. The hysteretic behaviour, stiffness degradation, energy dissipation and damage index are the parameters employed to analyse the efficacy of FRP strengthening of brick in-filled RC frames. Repair and retrofitting of brick infilled RC frame shows an improved load carrying and damage tolerance capacity than control frame.

• Journal of Distribution Science
• /
• v.14 no.7
• /
• pp.5-14
• /
• 2016

Purpose - This paper studies if types of markets have an association with several variables such as occupation, district, sales, employee, administrative district by a lessor, area in rental building and so on. Three attributes of markets can be general commercial zones, central commercial zones and traditional markets. Furthermore, we can investigate the degree of association by calculating the numerical strength and visualizing their distances on two-dimensional plane, once the association exists between them. Research design, data, and methodology - This work is performed by the 2013 report presented with Small Businessmen Promotion Institute in Korea and used by a chi-squared test and correspondence analysis by using IBM SPSS 23.0. Results - The results show that types of markets, including traditional markets, have an association with variables considered in this paper, and we can obtain the detailed associations between attributes of corresponding variables by inspecting two-dimensional plane. Conclusions - This study suggests that government authority and local autonomy can make strategies to vitalize traditional markets and to get win-win relationships among several types of markets by looking over our findings.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.33-33
• /
• 2000

In this paper a new distributive control system for BA(Building Automation ) lighting control used on general microprocessors is presented. For optimal lighting control and saving energy, The system have to control the group and pattern lighting control as well as individual light control at one time. Tn this paper, This functions are accomplished with low-cost and simple microprocessor. A plurality of modulated light control terminals are connected to the central control unit through a pair of power line. This power line provide both power and signal to the each terminal and the data is transmitted through cyclic time division multiplex transmission. With this structure a low-cost distributive control system for lighting applications has been achieved, allowing energy and maintenance saving and reliability increase of the light control system.

• Smart Structures and Systems
• /
• v.5 no.2
• /
• pp.139-152
• /
• 2009

Globally, civil infrastructures are deteriorating at an alarming rate caused by overuse, overloading, aging, damage or failure due to natural or man-made hazards. With such a vast network of deteriorating infrastructure, there is a growing interest in continuous monitoring technologies. In order to provide a true distributed sensor and control system for civil structures, we are developing a Structural Nervous System that mimics key attributes of a human nervous system. This nervous system is made up of building blocks that are designed based on mechanoreceptors as a fundamentally new approach for the development of a structural health monitoring and diagnostic system that utilizes the recently developed piezo-fibers capable of sensing and actuation. In particular, our research has been focused on producing a sensory nervous system for civil structures by using piezo-fibers as sensory receptors, nerve fibers, neuronal pools, and spinocervical tract to the nodal and central processing units. This paper presents up to date results of our research, including the design and analysis of the structural nervous system.

• International Journal of High-Rise Buildings
• /
• v.5 no.2
• /
• pp.127-136
• /
• 2016

As the great urban migration continues to drive the growth of cities worldwide, global companies are seeking new approaches to the urban workplace and corporate campus. In light of environmental and economic imperatives to develop taller and denser central business districts, a key challenge is merging contemporary workplace concepts, which emphasize large, open floors and high levels of connectivity, with high-rise typologies with smaller floor plates set around center cores. This paper traces the evolution of the corporate campus and emerging design strategies for translating contemporary workplace models into a vertical campus typology that allows companies to realize the benefits of urban locations, while contributing to a more sustainable future.

• International Journal of High-Rise Buildings
• /
• v.5 no.2
• /
• pp.105-115
• /
• 2016

In the process of exploring sustainable development, major cities in China are expanding metro systems as a strategy to reduce the negative environmental and social consequences of fast-paced motorization. A metro station is not only a transportation node, but also a place where diverse activities can be performed. Therefore, the realization of the spatial potential for human interaction is the essence of the strategy for integrated development in metro station areas. For this paper, 10 well-developed metro stations in Central Shanghai were selected to investigate the correlation between accessibility and spatial performance in station areas. The spatial performance in station areas is significantly affected by metro configuration. However, both vehicle and pedestrian accessibility show weak influence on spatial performance. A synergistic model was then developed to provide quantitative support for transit-oriented development in metro station areas.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.742-743
• /
• 2006

Filling of the tool die directly influences dimensional tolerances and density variation. To minimize the variations in filling, both within different sections of the cavity and from part to part, are of great importance for produce high quality P/M parts. Filling of the tool die is also one of the limiting factors in the productivity in powder pressing. By using aeration filling in combination with bonded powder mixes, both weight scatter and productivity can be improved. In this presentation results are presented showing the benefit of using aeration filling for different types of powders

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.16-24
• /
• 2010

This paper introduces the applications of Taiwan Earthquake Loss Estimation System (TELES), which is developed by the National Center for Research on Earthquake Engineering (NCREE). Seismic disaster simulation technology (SDST) integrates geographical information system to assess the distribution of ground shaking intensity, ground failure probability, building damages, casualties, post-quake fires, debris, lifeline interruptions, economic losses, etc. given any set of seismic source parameters. The SDST may integrate with Taiwan Rapid Earthquake Information Release System (TREIRS) developed by Central Weather Bureau (CWB) to obtain valuable information soon after large earthquakes and to assist in decision-making processes to dispatch rescue and medical resources more efficiently. The SDST may also integrate with probabilistic seismic source model to evaluate various kinds of risk estimates, such as average annual loss, probable maximum loss in one event, and exceeding probability curves of various kinds of losses, to help proposing feasible countermeasures and risk management strategies.