• Journal of Biosystems Engineering
• /
• 제8권2호
• /
• pp.39-48
• /
• 1983

This study was performed to obtain the basic data which could be used for the modification of the manual center-burner-type rice-husk furnace into a small scale automatic type for the multi-purpose use in the farm. For this purpose, first, the utilization feasibility of the rice-husk furnace in the farm was analyzed briefly in aspects of available amount of rice-husk for the fuel, annual operation time and replaceble amount of residential heating energy with rice-husk in the farm. For the experiment a prototype furnace geared with an automatic feeding device was fabricated, and feed rate, mold size and chimney height were changed to investigate the combustion efficiency of rice-husk and thermal efficiency of the furnace. Also, optimum and limiting operational factors were observed in each treatments. The results obtained are summarized as follows. 1. If the rice-husk is intensively used for residential heating in the farm for winter season, on an average 51 percent of the total heating energy can be replaced with the rice-husk. Therefore, development of a small scale automatic rice-husk furnace was recognized to be feasible. 2. The operational condition depending on husk-feed rates was very important factor for successive steady burning operation of the given furnace. When the feed-rate was 1.5 kg/hr, the top of the burning zone should be kept at the position about 55 cm from the bottom of the combustion chamber with the periodic removal of ash (termed as steady state position), which was 18 cm above the mold waist. When the feed rates were 2.4 kg/hr and 3.0 kg/hr, the steady state position was at about 4 cm above the mold waist. 3. The mold size affected inflow rate of air into the furnace and consequently CO content in the exhaust gas. The relatively bigger mold gave positive effect on the air-inflow rate. 4. When the husk-feed rates were 1.5 kg/hr, 2.4 kg/hr, 3.0 kg/hr, the combustion efficiencies of the rice-husk were 98.5%, 97.4% and 95.0%, the thermal efficiencies of the furnace were 93.4%, 93.2% and 87.6%, and CO content in the exhaust gas were 1.21%, 1.03%, and 2.43%, respectively. The air-inflow rates were decreased with the increase of feed rates. When the amount of excess air was 30-40%, the CO content in the exhaust gas was at the minimum level. 5. When the chimney height was lowered from 260 cm to 96 cm, the air-inflow rate was slightly decreased, but the average temperature in the combustion chamber, CO content in the exhaust gas and combustion and thermal efficiencies were not changed significantly. 6. The incidental problems associated with the protytype furnace were accumulation of the ash inside the mold, accumulation of the cinder between the outer-drum of the furnace and the combustion chamber wall, and accumulation of the cinder in the chimney.

• 한국공작기계학회논문집
• /
• 제10권4호
• /
• pp.55-64
• /
• 2001

In this study, hemisphere and cylindrical shapes were machined for different tool paths and machining conditions with ball endmill cutters. Tool deflection, cutting forces and shape accuracy were measured according to the inclination position of the sculptured surface. As the decreasing of inclination position angle, the tool deflection was increased due to the decreased cutting speed when the cutting edge is approaching toward the center. Tool deflection when upward cutting is obtained less than that of downward cutting and down-milling in upward cutting showed the least tool deflection for the sculptured surface. Roundness values were found in least roundness error when down-milling in upward cutting. It is obtained the very little difference between 90。and 45。 of inclination position angle. The best surface roughness value was obtained in upward up-milling and showed different tendency with tool deflection and cutting force. For down-milling, the cutting resistance of the side wall direction is larger than that of feed direction. Therefore, this phenomenon which is received over cutting resistance can be caused of chatter.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제9권2호
• /
• pp.481-491
• /
• 2019

고대에서 중세에 이르기까지 동서양의 문화가 교차하던 실크로드의 중심에 위치한 우즈베키스탄 사마르칸트에서 아프라시압 궁전지벽화가 1960년대 발굴되어 학계의 주목을 받아왔다. 특히, 7C 소그디아나 왕국 바르후만 왕의 즉위식이 그려진 서벽에서 고대 한국인으로 추정되는'조우관'을 쓴 두 인물이 발견되어 당시 국제적 정세와 문화적 특징을 살필 수 있는 중요한 사료로 활용되고 있다. 현재 아프라시압 역사박물관에 소장되어 있는 이 벽화는 사방으로 각기 다른 내용의 그림이 그려져 있고, 그것만이 가진 문화적 특성과 요소들이 내재되어 있음에도 불구하고 이를 활용한 스토리텔링과 문화콘텐츠의 개발은 없었다. 따라서 본 연구의 목적은 고대 한국인이 그려진 아프라시압 궁전지 벽화의 서벽 그림을 기반으로 한 문화콘텐츠와 캐릭터 개발과 활용방안을 모색하고자 한다. 이를 위하여 직접 현장을 방문하여 조사한 자료는 물론이며 기타 관련 학술자료들을 수집하였다.

• Animal Bioscience
• /
• 제34권3_spc호
• /
• pp.417-426
• /
• 2021

Objective: Effects of inulin supplementation in diet of Haidong chicks under hypoxic conditions on production performance, intestinal morphologic change, microflora contents and the incidence of ascites were studied. Methods: Commercial male chicks (360) were randomly divided into 6 groups and were fed diets supplemented with 0, 0.05, 0.075, 0.1, 0.125, and 0.15 g/kg of inulin, respectively. Results: The body weight gain and feed intake were improved in chicks fed the diets supplemented with 0.1 and 0.125 g/kg of inulin, from d 1 to d 42 (p<0.05); moreover, blood parameters were positively affected when inulin was included in the diets and the thickness of the intestinal wall and muscle tissue in duodenum, jejunum, and ileum tended to increase (p<0.05), and the villi height and crypt depth in duodenum, jejunum, and ileum (p<0.05). Regarding the number of goblet cells in duodenum, jejunum and ileum tended to increase when chicks were fed the diets supplemented with 0.075, 0.1, 0.125, and 0.15 g/kg (p<0.05) of inulin. When chicks were fed diets supplemented with 0.75 or 0.1 g/kg of inulin, a significant reduction of Escherichia coli counts in the cecum was observed; for a contrary, a significant increment of Bifidobacterium and Lactobacillus was observed in cecum and ileum. Finally, supplementing the feed with inulin determined an overall reduction of ascites incidences in comparison to the control group. Conclusion: Thus, the results observed in the present study clearly suggest that the diet supplementation with a quantity of inulin ranging between 0.1 and 0.125 g/kg, can improve growth performances, intestinal morphology, internal microbial balance and ascites incidence, in broiler chicks raised at high altitude area. Even though these findings may be of interest for the poultry industry, they may particularly be relevant in those areas characterized by high altitude such as Northwest China regions.

• 한국식품과학회지
• /
• 제31권4호
• /
• pp.1011-1016
• /
• 1999

식물의 세포벽 모형에 근거하여 고온고압의 조건하에서 기계적인 전단웅력을 식물 세포벽에 가할 경우 수용성 다당류를 효과적으로 분리할 수 있다는 가설에 근거하여 사과박으로부터 펙틴을 추출하기 위해 압출처리법을 도입하였다. L/D비가 20: 1인 동방향완전맞물림형 이축압출기를 이용하여 압출기의 축회전수, 원료의 공급률 및 원료의 수분함량을 공정변수로 하고 압출기의 비기계에너지를 시스템의 매개변수로 하여 압출처리에 의한 수용성 다당류의 수율, 평균 분자량 및 galacturonic acid 함량을 분석한 후, 각각의 모형을 개발하였다. 펙틴의 수율과 품질을 동시에 비교해 볼때, 비기계에너지를 증가시키면 펙틴의 수율이 향상되는 것으로 나타났으나, 수율을 향상시키는 압출조건은 품질의 저하를 초래하는 것으로 나타났다. 비기계에너지가 191 kWh/ton인 고강도의 추출조건에서 수율은 20.1%로 나타나 기존의 산처리법에 의한 14.4% 수율보다 월등히 향상된 수율을 얻을 수 있었다. 한편, 비기계에너지가 96 kWh/ton인 저강도의 추출조건에서는 분자량이 240,000인 펙틴을 얻을 수 있어 산처리시 분자량 181,000의 펙틴보다 훨씬 양질의 펙틴을 얻을 수 있었다. 따라서, 목표로 하는 품질의 펙틴을 생산할 수 있으면서 최고의 수율을 얻을 수 있는 압출조건을 설정해야 하며, 이를 위해서 본 연구에서 제시한 펙틴의 수율 및 품질 모형을 이용할 수 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권4호
• /
• pp.556-567
• /
• 2020

Objective: To improve the utility of native grass resources as feed in China, we investigated the dynamics of protein and carbohydrate fractions among Inner Mongolian native grasses, during ensiling and the aerobic stage, using the Cornell Net Carbohydrate and Protein System. Methods: Silages were prepared without or with lactic acid bacteria (LAB) inoculant. We analyzed the protein and carbohydrate fractions and fermentation quality of silages at 0, 5, 15, 20, 30, and 60 d of ensiling, and the stability at 0.5, 2, 5, and 10 d during the aerobic stage. Results: Inner Mongolian native grass contained 10.8% crude protein (CP) and 3.6% water-soluble carbohydrates (WSC) on a dry matter basis. During ensiling, pH and CP and WSC content decreased (p<0.05), whereas lactic acid and ammonia nitrogen (N) content increased (p<0.05). Non-protein N (PA) content increased significantly, whereas rapidly degraded true protein (PB₁), intermediately degraded true protein (PB₂), total carbohydrate (CHO), sugars (CA), starch (CB₁), and degradable cell wall carbohydrate (CB₂) content decreased during ensiling (p<0.05). At 30 d of ensiling, control and LAB-treated silages were well preserved and had lower pH (<4.2) and ammonia-N content (<0.4 g/kg of fresh matter [FM]) and higher lactic acid content (>1.0% of FM). During the aerobic stage, CP, extract ether, WSC, lactic acid, acetic acid, PB₁, PB₂, true protein degraded slowly (PB₃), CHO, CA, CB₁, and CB₂ content decreased significantly in all silages, whereas pH, ammonia-N, PA, and bound true protein (PC) content increased significantly. Conclusion: Control and LAB-treated silages produced similar results in terms of fermentation quality, aerobic stability, and protein and carbohydrate fractions. Inner Mongolian native grass produced good silage, nutrients were preserved during ensiling and protein and carbohydrate losses largely occurred during the aerobic stage.

• 한국전자통신학회논문지
• /
• 제17권5호
• /
• pp.775-782
• /
• 2022

본 논문에서는 보다 편리한 튜닝을 위해 Evanescent-Mode Rectangle Waveguide(EMRWG)에 삽입된 새로운 작은 직경의 원통형 포스트 커패시터를 제안하였다. EMRWG급전을 위한 제안된 구조는 입력 및 출력 끝에서 도파관과 동일한 너비와 높이를 갖는 단일 리지 직사각형 도파관을 사용하였다. 삽입된 포스트 커패시터는 EMRWG의 넓은 벽체 하부 중앙에 형성된 원형 홈과 상부에 삽입된 동심원기둥 포스트로 구성된다. 먼저 제안된 구조에 대한 등가회로 모델을 제시하였고, EMRWG와 단일 리지 도파관이 결합될 때 이상적인 변압기의 접합 서셉턴스와 권선비는 각각 HFSS(3d fullwave 시뮬레이터, Ansoft Co.)를 사용하여 두 가지 경우에 대해 시뮬레이션하였다. 얻어진 매개변수와 EMRWG의 특성을 이용하여 삽입된 기둥의 서셉턴스 및 공진 특성을 분석하였다. 중심주파수 4.5GHz, 대역폭 170MHz의 2포스트 필터는 WR-90 도파관을 이용하여 설계하였으며, 등가회로 모델에 대한 계산과 HFSS와 CST를 이용한 시뮬레이션 결과가 서로 일치하였다.