• Korea Journal of Hospital Management
• /
• v.7 no.3
• /
• pp.121-136
• /
• 2002

The main purpose of this study is to examine the overall procedure of hospital's internal review of health insurance reimbursement, to present the case of protest against reimbursement cut, and hence to provide some information on hospital's management of medical revenue. The object of the case study is 'P' university medical center, possessing 5 different hospitals under its system. Presentation of the case of protest against reimbursement cut has following meanings: Firstly, to the hospitals that already have internal review departments, information on the details of the protest process and results can be exchanged. Secondly, to the Government and National Health Insurance Corporation, useful data are provided for the improvement of the rules and procedures of health insurance reimbursement. Thirdly, to the hospitals without internal review departments, fundamental materials on the internal review process are provided for the effective management of medical revenue.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.29-34
• /
• 2012

This paper reports some experimental results in high speed rigid tapping of magnesium alloy(AZ91D). M3 spiral tap and high speed spindle tapping center of gantry type were used in experiments and thrust forces were measured. The experimental results indicate that the thrust forces are proportional to the spindle speed and depth of cut. The thrust forces increase as the depth of cut increases. M3 Tapping was achieved at the spindle speed of 10,000rpm, depth of cut of 1.5D and total stroke of 32mm.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.6
• /
• pp.36-43
• /
• 2003

In machining of ceramic materials, they are very difficult-to cut materials because of there high strength and hardness. Machining of ceramics are characterized by cracking and brittle fracture. Generally, ceramics are machined using conventional method such as finding and polishing. However these processes are generally costly and have low MRR(material removal rate). This paper focuses on determining the optimal levels of process parameters for products with CNC machining center. For this purpose, the optimization of cutting parameters is performed based on experimental design method. A design and analysis of experiments is conducted to study the effects of these parameters on the surface roughness by using the S/N ratio, analysis of ANOVA and F-test. Cutting parameters, namely, cutting speed, feed and depth of cut are optimized with consideration of the surface roughness.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.135-138
• /
• 2009

In this study we investigate the machining characteristics of tool material for cold forging by using the machining center. The test was in the SKD62 cold forging material by 2-edge endmill with cutting fluid. The coating conditions are depth of cut 1,2,3mm. WC-endmill, federate 20mm/min, cutting velocity 20m/min. The surface roughness increase as the depth of cut increase. Also cutting force increase whiles the depth of cut increase.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.61-68
• /
• 1998

The form accuracy of parts has become an important parameter. Therefore, dimensional tolerance and geometric tolerance are used in the design stage to satisfy required quality and functions of parts. But the informations on the machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among them. The results are as follows, The effects of work speed and depth of cut on workpiece shape are negligible compared with the effect of traverse speed. There is an optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing as the traverse speed is increased.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.539-542
• /
• 2009

A new gerbera variety "Pink Swan" was released by the National Horticultural Research Institute (NHRI) in 2007. A cross was made between "Royal" with orange and single and 'Himalaya' with white and semi-double in 2004. After investigation of the characteristics for 4 years (from 2004 to 2007), it was selected specially for the use of cut-flower. "Pink Swan" is a vigorous medium-sized cultivar with pink (RHS R48D), yellow green center and semi-double. The average flower diameter is 10.6 cm. And inner ray floret and disc diameter is 5.99cm and 1.83cm, respectively. It produces a large yield with continuous supply of flowers and has adequate peduncle height. We believe that "Pink Swan" has a great potential for expanding cultivated area of domestic gerbera cultivar and increasing farmers-income.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.499-502
• /
• 2008

A new gerbera variety 'Yellow Wing' was released by the National Horticultural Research Institute (NHRI) in 2007. A cross was made between 'Gold Finger' with yellow and single and 'Yellow Springs' with yellow and spider in 2004. After investigation of the characteristics for 4 years (from 2004 to 2007), it was selected specially for the use of cut-flower. 'Yellow Wing' is a vigorous cultivar with yellow (RHS YO14B), green center and spider type. The flower diameter is 10.6cm. And inner ray floret and disc diameter is 2.83cm and 2.03cm, respectively. It produces a large yield with continuous supply of flowers and has adequate peduncle height and brilliant color. We believe that 'Yellow Wing' has a great potential for expanding cultivated area of domestic gerbera cultivar and increasing farmers-income.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.221-223
• /
• 1991

In order to evaluate degradation of the aged power cables, thin slices(200m) cut from the aged cables were prepared for thermally stimulated current measurements. Throughout the temperature range, 140 to $280^{\circ}C$ the TSC is greater for the aged material, and sharp peak is observed at $158^{\circ}C$ and $210^{\circ}C$.

• Journal of Navigation and Port Research
• /
• v.35 no.10
• /
• pp.847-853
• /
• 2011

The purpose of this study is to develope a series of business models for promotion of value added logistics activities of lumber hinterland in Incheon Northport. A set of policies to create value added developed are an import market diversification model using Incheon Northport, a model by building integration processing center by pallet facility, a model by joint logistics center, an export-oriented Pre-cut material development model and an export processing value added model.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.579-582
• /
• 1989

The air-cooled waterwheel generator has a fan connected to waterwheel shaft or motor driven fan or fans. The fans are operated at constant speed, constant input, regardless of generator loss which is varied according to generator output and coolant the perature. Energy savings may he possible if the cooling air flow is controlled according to generato output and air temperature depending on season. The simulation and experience have been done on the 22.6 KVA Waterwheel generator by using AC variable speed drive. The results gave us los cut of generator.