• 한국환경생태학회지
• /
• 제29권2호
• /
• pp.210-220
• /
• 2015

We quantified temporal and spatial changes in the habitat for fish populations, the distribution of mandarin fish(Siniperca scherzeri) and an introduced species, largemouth bass(Micropterus salmoides) in Lake Paro and inflowing streams. The number of fish species identified in Lake Paro and the tributary streams included 10 families, 24 species and 10 families 30 species, respectively. The dominant fish species in Lake Paro were Zacco platypus, Hemibarbus labeo, Squalidus gracilis majimae, S. scherzeri and Tridentiger brevispinis, Z. platypus, Z. koreanus, and S. gracilis majimae in the inflowing streams. Although the habitat segregation for S. scherzeri and M. salmoides occurs, these two species showed the use of the fishes of the family Gobiidae as an important prey item based on IRI analysis. S. scherzeri and M. salmoides preyed mainly on T. brevispinis(67.4 %) and R. brunneus(84.0 %), respectively. The species preyed on by S. scherzeri and M. salmoides were benthic fishes that inhabit shallow water depths around the lake and have little swimming ability.

• 한국어류학회지
• /
• 제22권1호
• /
• pp.49-55
• /
• 2010

참갈겨니 NE와 NS형의 서식범위 내에서 두 형이 공서하는 지점을 조사한 결과 낙동강과 섬진강의 각 지류의 상류지점, 남해로 흐르는 일부 하천에서 발견되었다. 두 형이 공서하는 하천에서의 분포양상은 NE형은 상류 지역에 NS형은 중류 지역에 치우치는 경향을 보였다. 중간 지역에서는 같은 지점에서 동시에 출현하였으나, NE형은 여울에 NS형은 웅덩이 또는 흐름이 느린 곳에서 주로 서식하는 서식처 분리현상을 나타내었다. 유속과 출현개체수의 관계는 공서지에서는 유속의 증가에 따라 NE형은 개체수가 증가하는 반면 NS형은 감소하는 경향을 보였으나, 각각 단독으로 존재하는 곳에서는 그러한 경향이 나타나지 않았다.

• 한국주조공학회지
• /
• 제19권1호
• /
• pp.47-53
• /
• 1999

Squeeze casting process has been used in the field of a commercial manufacturing method, in which metal is enforcedly solidified under pressure enough to prevent the cast defects such as either gas porosity or shrinkage defect. In this paper, to clarify the relationship between applied pressures and macro ${\cdot}$ microstructural behaviors in gravity and direct squeeze casts, specimens were cast by various squeezing pressures during solidification of 7000 series Al wrought alloy in the metal die designed specially. The applied pressures used in this study were 0, 25, 50, and 75 MPa. The microstructural morphologies of squeeze cast were more fine and dense with increasing the applied pressures, because of the greater solidification rate of billet resulting from the applied pressure. A normal segregation phenomenon of an increasing in amount of eutectics towards the center of the billet was observed for squeeze casts, whereas gravity cast showed an inverse segregation phenomenon of an increasing in amount of eutectics towards the edge in the billet. This change in segregation pattern which is normal or inverse is due to a higher radial temperature gradient and reduced time in the semi solid state for squeeze casting.

• 한국지반공학회논문집
• /
• 제26권4호
• /
• pp.5-14
• /
• 2010

본 연구에서는 새로운 동상 억제제로서 폐타이어 파우더의 활용가능성을 검토하기 위해 폐타이어 분말 혼합토와 미혼합토를 대상으로 3년간 일본 토마코마이에서 야외실험 수행하였다. 야외실험 결과, 폐타이어 파우더를 20% 혼합함에 의해 현저한 동상억제 효과가 발생함을 확인하였으며, 관련 동상억제 효과를 동상량, 동상율, 열전도율, 투수성, segregation potential 이론 등을 중심으로 정량적으로 검토하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권5호
• /
• pp.572-578
• /
• 2014

In order to overcome small current drivability of a tunneling field-effect transistor (TFET), a TFET using Schottky barrier (SBTFET) is proposed. The proposed device has a metal source region unlike the conventional TFET. In addition, dopant segregation technology between the source and channel region is applied to reduce tunneling resistance. For TFET fabrication, spacer technique is adopted to enable self-aligned process because the SBTFET consists of source and drain with different types. Also the control device which has a doped source region is made to compare the electrical characteristics with those of the SBTFET. From the measured results, the SBTFET shows better on/off switching property than the control device. The observed drive current is larger than those of the previously reported TFET. Also, short-channel effects (SCEs) are investigated through the comparison of electrical characteristics between the long- and short-channel SBTFET.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.293-300
• /
• 2023

The global energy storage markets have gravitated to high-energy-density and low cost of lithium-ion batteries (LIBs) as the predominant system for energy storage such as electric vehicles (EVs). High-Ni layered oxides are considered promising next-generation cathode materials for LIBs owing to their significant advantages in terms of high energy density. However, the practical application of high-Ni cathodes remains challenging, because of their structural and surface instability. Although extensive studies have been conducted to mitigate these inherent instabilities, a two-step process involving the synthesis of the cathode and a dry/wet coating is essential. This study evaluates a one-step β-Li₂SnO₃ layer coating on the surface of LiNi_0.8Co_0.2O₂ (NC82) via the thermal segregation of Sn owing to the solubility limit with respect to the synthesis temperature. The doping, segregation, and phase transition of Sn were systematically revealed by structural analyses. Moreover, surface-engineered 5 mol% Sn-coated LiNi_0.8Co_0.2O₂ (NC82_Sn5%) exhibited superior capacity retention compared to bare NC82 owing to the stable surface coating layer. Thus, the developed one-step coating method is suitable for improving the properties of high-Ni layered oxide cathode materials for application in LIBs.

• 한국레이저가공학회지
• /
• 제16권3호
• /
• pp.1-10
• /
• 2013

In this study, Al-Si coated boron steel(1.2 mm) were laser welded by $CO_2$ laser and hot-stamping was applied to the laser joints. Tensile properties and microstructures of the joints were investigated before and after hot-stamping. Tensile and yield strengths of the as welded specimen similar with base metal and fracture occurred base metal of boron steel. Although, in case of heat treated specimen, fracture occurred fusion zone that Al segregated zone near the bond line. These could be explained by the existence of ferrite, in the Al segregated zone near the bond line and base metal of boron steel. Before hot-stamping, hardness of base metal is lower than fusion zone and heat affected zone in spite of exist Al segregation zone($Fe_3$(Al,Si)). So fracture occurred base metal. Although, after hot-stamping, microstructure of base metal and welds zone transformed to martensite and bainite except in Al segregation zone near the bond line that $Fe_3$(Al,Si) transformed to a-ferrite. So fracture occurred Al segregation zone near the bond line.

• 마이크로전자및패키징학회지
• /
• 제15권1호
• /
• pp.33-37
• /
• 2008

Kirkendall void는 전해도금 Cu/Sn-Ag 솔더 접합부에서 형성되었으며 Cu 도금욕에 함유되는 첨가제에 의존한다. 첨가제로 사용된 SPS의 함량의 증가와 함께 $150^{\circ}C$에서 열처리 후 많은 양의 Kirkendall void가 $Cu/Cu_3Sn$ 계면에 존재하였다. AES 분석은 void 표면에 S가 편석되어 있음을 보여주었다. $Cu/Cu_3Sn$ 계면을 따라 파괴된 시편에서 Cu, Sn, S peak만 검출되었고 AES 깊이 프로파일에서 S는 급격하게 감소하였다. $Cu/Cu_3Sn$ 계면에서 S 편석은 계면에너지를 낮추고 Kirkendall void 핵생성을 위한 에너지장벽을 감소시킨다. 낙하충격시험은 SPS를 사용하여 도금된 Cu의 경우 Kirkendall void가 형성된 $Cu/Cu_3Sn$ 계면에서 파괴가 진행되고 급격하게 신뢰성이 감소됨을 보였다.

• Mycobiology
• /
• 제49권4호
• /
• pp.406-420
• /
• 2021

Gloeostereum incarnatum has edible and medicinal value and was first cultivated and domesticated in China. We sequenced the G. incarnatum monokaryotic strain GiC-126 on an Illumina HiSeq X Ten system and obtained a 34.52-Mb genome assembly sequence that encoded 16,895 predicted genes. We combined the GiC-126 genome with the published genome of G. incarnatum strain CCMJ2665 to construct a genetic linkage map (GiC-126 genome) that had 10 linkage groups (LGs), and the 15 assembly sequences of CCMJ2665 were integrated into 8 LGs. We identified 1912 simple sequence repeat (SSR) loci and detected 700 genes containing 768 SSRs in the genome; 65 and 100 of them were annotated with gene ontology (GO) terms and KEGG pathways, respectively. Carbohydrate-active enzymes (CAZymes) were identified in 20 fungal genomes and annotated; among them, 144 CAZymes were annotated in the GiC-126 genome. The A mating-type locus (MAT-A) of G. incarnatum was located on scaffold885 at 38.9 cM of LG1 and was flanked by two homeodomain (HD1) genes, mip and beta-fg. Fourteen segregation distortion markers were detected in the genetic linkage map, all of which were skewed toward the parent GiC-126. They formed three segregation distortion regions (SDR1-SDR3), and 22 predictive genes were found in scaffold1920 where three segregation distortion markers were located in SDR1. In this study, we corrected and updated the genomic information of G. incarnatum. Our results will provide a theoretical basis for fine gene mapping, functional gene cloning, and genetic breeding the follow-up of G. incarnatum.

• Journal of Korean Neurosurgical Society
• /
• 제46권2호
• /
• pp.123-129
• /
• 2009

Objective: This study was aimed to identify the incidence and risk factors of vancomycin-resistant enterococcus (VRE) colonization in neurosurgical practice of field, with particular attention to intensive care unit (ICU). Methods: This retrospective study was carried out on the Neurosurgical ICU (NICU), during the period from January. 2005 to December. 2007, in 414 consecutive patients who had been admitted to the NICU. Demographics and known risk factors were retrieved and assessed by statistical methods. Results: A total of 52 patients had VRE colonization among 414 patients enrolled, with an overall prevalence rate of 6.1%. E. faecium was the most frequently isolated pathogen, and 92.3% of all VRE were isolated from urine specimen. Active infection was noticed only in 2 patients with bacteremia and meningitis. Relative antibiotic agents were third-generation cephalosporin in 40%, and vancomycin in 23%, and multiple antibiotic usages were also identified in 13% of all cases. Multivariate analyses showed Glasgow coma scale (GCS) score less than 8, placement of Foley catheter longer than 2 weeks, ICU stay over 2 weeks and presence of nearby VRE-positive patients had a significantly independent association with VRE infection. Conclusion: When managing the high-risk patients being prone to be infected VRE in the NICU, extreme caution should be paid upon. Because prevention and outbreak control is of ultimate importance, clinicians should be alert the possibility of impending colonization and infection by all means available. The most crucial interventions are careful hand washing, strict glove handling, meticulous and active screening, and complete segregation.