• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.12
• /
• pp.781-785
• /
• 2016

With trend of the miniaturization and the high-functionalizing of mobile communication system, low-loss microwave dielectric materials are widely used for high frequency communication components. These dielectric materials should be co-sintered with highly electric-conducting metal such as silver or copper for high-frequency and thick film process application. Sintering temperature of $Ca(Li_{1/3}Nd_{2/3})_{0.2}Ti_{0.8}]O_{3-{\delta}}$, which has excellent dielectric properties such as ${\varepsilon}_r$ above 40, quality factor ($Q{\cdot}f_0$) above 16,000 GHz, and TCF (temperature coefficient of resonant frequency) of $-20{\sim}-10ppm/^{\circ}C$, is reported as high as $1,175^{\circ}C$, so it could not be co-sintered with silver or copper. Therefore in this study, low-temperature melting glasses of Zn-B-O and Zn-B-Si-O systems were added to $Ca[(Li_{1/3}Nb_{2/3})_{0.8}Ti_{0.2}]O_{3-{\delta}}$ to lower its sintering temperature under $900^{\circ}C$ without losing excellency of dielectric properties. With 15 weight % of Zn-B-Si-O glass and sintered at $875^{\circ}C$, specimen showed density of $4.11g/cm^3$, ${\varepsilon}_r$ of 40.1, $Q{\cdot}f_0$ of 4,869 GHz, and TCF of $-5.9ppm/^{\circ}C$. With 15 weight % of Zn-B-O glass and sintered at $875^{\circ}C$, specimen showed density of $4.14g/cm^3$, ${\varepsilon}_r$ of 40.4, $Q{\cdot}f_0$ of 7,059 GHz, and TCF of $-0.92ppm/^{\circ}C$.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.570-575
• /
• 2007

The thermal performance of the air receiver filled with porous material for 5kWt dish solar collector installed in Inha University, Korea, is experimentally investigated. The diameter of the parabolic dish is 3.2 m, and its focal length is 2 m. It consists of 10 small pieces of glasses which have their own curvatures, and the effective reflecting area is 5.9 m2. The reflectivity of the glass is 0.95, and the thermal capacity of the system is about 5 kW thermal. The aperture diameter of the cylindrical-shape receiver which is made of stainless steel is 100 mm, and the height is 210 mm. A quartz window is installed at the receiver aperture to minimize the convective heat loss and prevent air leakages. In order to increase the heat transfer area, porous material (nickel-alloy) is inserted into the receiver. Air flows into the upper part of the receiver, which is the opposite side of the aperture. After the air flows through the inside receiver, that goes out of the receiver through 3 exits which are located near the aperture. The volumetric flow rates of air are varied from 600 to 1200 L/min. The thermal efficiency of the receiver ranges from 82% - 92% depending upon the flow rate. The results show that the system efficiency and receiver efficiency increase as the volume flow rate increases as expected. These results from the experiment will be useful for the applications to air heating receivers and solar reactors.

• Journal of Acupuncture Research
• /
• v.27 no.1
• /
• pp.75-86
• /
• 2010

Objectives : We developed and proposed a guideline for safety and performance assessment of electric moxibustion apparatus (class II medical device). Methods : We drafted the guideline for safety and performance assessment of electric moxibustion apparatus by referring the existing standards, guidelines and measurement data from commercially available products. Temperature characteristics such as maximum temperature and ramp time, and physical characteristics such as weight, noise and diameter were measured. User friendliness was also evaluated for commercial devices. Results : This guideline only can be applied to the electric moxibustion apparatus where moxa is being heated by electricity for medical proposes. Maximum temperature of higher than $50^{\circ}C$ can be achieved mostly. Ramp rate of temperature seems to be reliable. Control of temperature is needed to be improved. Moxa and its derivative products seem to be regulated for reliable temperature performance for clinical application. Requirements for design and development of electric moxibustion apparatus are suggested : temperature indicator, temperature control and its accuracy, safety measure, surge protection, user friendliness and instruction for use (IFU). Design recommendation of the reduction of noise level and energy loss are suggested for better products. Conclusions : We proposed a guideline for safety and performance assessment of electric moxibustion apparatus to improve the quality of relating products and aid their commercialization by aiming higher industrial competitiveness of the medical device sectors in Korea. Discussion with related institutes such as industry, academy and government is further required. Public hearings also need to be held prior to the establishment of a final guideline and standard.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.603-611
• /
• 2011

Ethoxylacetyl oxime ligands [HL, (1) and $H_2L^1$, (3)] react with copper(II) acetate monohydrate yield octahedral and square planar complexes, respectively. The complexes have been postulated due to elemental analyses, IR, UVVis. spectra, magnetic susceptibility, conductivity and ESR spectra. Molar conductance of the complexes in DMF indicates a non-ionic character. The ESR spectra of [$(L)_2Cu(H_2O)_2$], (2) complex at room temperature and 77K are characteristic of an axial symmetry ($d_{x2-y2}$) with covalent bond character and have a large line width typical of dipolar interactions. However, [$(L^1)Cu$], (4) complex in the solid state showed spectra of marked broadening and loss of hyperfine splitting confirming spinexchange interactions between the copper(II) sites. The spectrum of the doped copper(II) complex at room temperature showed super-hyperfine splitting from coordinated nitrogen atoms and it has an axial type ($d_{x2-y2}$) with covalent bond character and an essentially square-planar arrangement around the copper(II) ion. The spectrum of [$(L^1)Cu$], (4) in frozen methanol at 77K was characteristic of the triplet state of a dimer species and the distance found between the two copper(II) centers was calculated and is equal to 4.8 ${\AA}$.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.2
• /
• pp.333-340
• /
• 1998

Background: Lung cancer is the leading cause of cancer over the world. P53 alteration is by far the most common genetic defect in lung cancer. The mutation of p53 protein involves the loss of inhibitory function of p53 related tumor suppressor gene and resultant oncogenesis. The analysis of p53 alterations consists of immunohistochemical stain, PCR based assay, or serologic ELISA (enzyme-linked immunosorbent assay). Methods : Serum levels of p53 mutant protein were measured in 69 cases of lung cancer (adenocarcinoma n=29, epidermoid n=16, small cell n=13, large cell n=1, undifferentiated n=1, undetermined n=9) and 42 controls of respiratory disorders using ELISA. Immunohistochemical stain in tissue was performed using monoclonal antibody of p53 in lung cancer subjects. Results: Both serum p53s in nonsmall cell cancer ($0.28{\pm}0.44ng/ml$) and in small cell cancer ($0.20{\pm}0.14ng/ml$) were not different from controls ($0.34{\pm}0.20ng/ml$). Also there was no significant difference in serum p53 according to tumor stages. P53 immunohistochemical stain showed 50% positivity overall in lung cancer. There were no close correlation between serologic level and positivity of immunohistochemical stain. Conclusion: The serologic determination of p53 mutant protein is thought to have no diagnostic role in lung cancer. Immunohistochemical stain in lung cancer specimen shows 50% positivity.

• Journal of Ginseng Research
• /
• v.44 no.1
• /
• pp.168-177
• /
• 2020

Background: Ginseng has been widely used as a health-promoting tonic. Gintonin present in ginseng acts as a lysophosphatidic acid (LPA) receptor ligand that activates six LPA receptor subtypes. The LPA6 subtype plays a key role in normal hair growth, and mutations in the LPA6 receptor impair normal human hair growth. Currently, human hair loss and alopecia are concerning issues that affect peoples' social and day-to-day lives. Objective: We investigated the in vitro and in vivo effects of a gintonin-enriched fraction (GEF) on mouse hair growth. Methods: Human hair follicle dermal papilla cells (HFDPCs) and six-week-old male C57BL/6 mice were used. The mice were divided into the four groups: control, 1% minoxidil, 0.75% GEF, and 1.5% GEF. The dorsal hair was removed to synchronize the telogen phase. Each group was treated topically, once a day, for 15 days. We analyzed hair growth activity and histological changes. Results: GEF induced transient [Ca²⁺]_i, which stimulated HFDPC proliferation and caused 5-bromo-2'-deoxyuridine (BrdU) incorporation in a concentration-dependent manner. GEF-mediated HFDPC proliferation was blocked by the LPA receptor antagonist and Ca²⁺ chelator. HFDPC treatment with GEF stimulated vascular endothelial growth factor release. Topical application of GEF and minoxidil promoted hair growth in a dose-dependent manner. Histological analysis showed that GEF and minoxidil increased the number of hair follicles and hair weight. Conclusion: Topical application of GEF promotes mouse hair growth through HFDPC proliferation. GEF could be one of the main components of ginseng that promote hair growth and could be used to treat human alopecia.

• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.51-55
• /
• 2015

This study investigated the changes in the physicochemical characteristics and sensory evaluation of Aster scaber by blanching treatment time. Aster scaber was blanched with $100^{\circ}C$ hot water for 1~5 min. At $100^{\circ}C$ blanching, the total polyphenol contents of the sample blanched for 1~5 min ranged from 7.57 to 6.45% while the sample blanched for 5 min showed a severe loss of phenolic compounds. The sample blanched $at 100^{\circ}C$ for 5 min had the lowest $L^*$ and $b^*$ values (24.96 and 16.14, respectively) and the highest $a^*$ value (-10.39) among all the samples. With regard to the texture profile, the sample blanched at $100^{\circ}C$ for 5 min was the highest in texture. Significant reductions in the texture, color, and total phenol content were observed after blanching. In the sensory evaluation, the Aster scaber sample blanched with hot water at $100^{\circ}C$ for 2 min showed the highest color, appearance, and flavor while the sample heated with boiling water for 3 min had the highest sensory score in terms of texture and overall acceptability. In conclusion, the 3 min blanching of Aster scaber yielded the best sensory quality.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1604-1612
• /
• 1999

The study was carried out to investigate the quality of the wet noodle added with the powders of nopal and nopalitos from Opuntia ficus-indica. The wet noodles were prepared to the ratio of 3, 6 and 9% (w/w) of the nopal and the nopalitos based on a flour weight. The initial pasting temperature and final viscosity in an amylograph decreased as the increase of the nopal and the nopalitos powders. A cooked weight and volume decreased with the increase of the nopal and the nopalitos powders, while a cooking loss increased. From the sensory evaluation, the wet noodles included 3% nopalitos and 6% nopal powders were similarly evaluated as the noodle used whole wheat flour. Bacterial counts of wet noodle with the nopal and the nopalitos powders were always lower than those of the control. Bacterial counts of wet noodle slowly increased as the increase of the amount of nopal and the nopalitos powders during storage at $4^{\circ}C\;and\;20^{\circ}C$. The methanol extracts from the nopal showed antimicrobial activities against Escherichia coli, Escherichia coli O157 : H7, Salmonella typhimurium, and Bacillus subtilis, while the extracts from the nopalitos showed antimicrobial activity only against Escherichia coli.

• Korean Journal of Microbiology
• /
• v.32 no.4
• /
• pp.271-279
• /
• 1994

To develop a yeast strain which stably secretes both $\alpha$-amylase and glucoamylase and therefore is able to convert starch directly to ethanol, a mouse salivary $\alpha$-amylase cDNA gene with a yeast alcohol dehydrogenase I promoter has been introduced into the cell of a Saccharomyces diactaticus hybrid strain secreting only glucoamylase. To secrete both enzymes more stably without loss of the $\alpha$-amylase gene during a cell-multiplication, an integrating plasmid vector containing $\alpha$-amylase gene was constructed and introduced into the yeast cell. The results showed that the linearized form of the integrating vector was superior in the transformation efficiency and the rate of the expression of the $\alpha$-amylase gene than the circular type of the vector. The yeast transformant having a linearized plasmid vector exhibited higher mitotic stability than the yeast transformant habouring episomat plasmid vector. The transformant containing the linearized vector producing both $\alpha$-amylase and glucoamylase exhibited 2-3 times more amylolytic activity than the original untransformed strain secreting only glucoamylase.

• Wind and Structures
• /
• v.16 no.4
• /
• pp.301-322
• /
• 2013

Recent major post-hurricane damage assessments in the United States have reported that the most common damages result from the loss of building roof coverings and subsequent wind driven rain intrusion. In an effort to look further into this problem, this paper presents a full-scale (Wall of Wind --WoW--) investigation of external and underneath wind pressures on roof tiles installed on a low-rise building model with various gable roofs. The optimal dimensions for the low-rise building that was tested with the WOW are 2.74 m (9 ft) long, 2.13 m (7 ft) wide, and 2.13 m (7 ft) high. The building is tested with interchangeable gable roofs at three different slopes (2:12; 5:12 and 7:12). The field tiles of these gable roofs are considered with three different tile profiles namely high (HP), medium (MP), and low profiles (LP) in accordance with Florida practice. For the ridge, two different types namely rounded and three-sided tiles were considered. The effect of weather block on the "underneath" pressure that develops between the tiles and the roof deck was also examined. These tests revealed the following: high pressure coefficients for the ridge tile compared to the field tiles, including those located at the corners; considerably higher pressure on the gable end ridge tiles compared to ridge tiles at the middle of the ridge line; and marginally higher pressure on barrel type tiles compared to the three-sided ridge tiles. The weather blocking of clay tiles, while useful in preventing water intrusion, it doesn't have significant effect on the wind loads of the field tiles. The case with weather blocking produces positive mean underneath pressure on the field tiles on the windward side thus reducing the net pressures on the windward surface of the roof. On the leeward side, reductions in net pressure to a non-significant level were observed due to the opposite direction of the internal and external pressures. The effect of the weather blocking on the external pressure on the ridge tile was negligible.