• Journal of the korean society of oceanography
• /
• v.33 no.1-2
• /
• pp.35-40
• /
• 1998

In February and April 1997, three temporary interruptions of electric power production at the Uljin Nuclear Power Plant in the east coast of Korea were caused by the malfunction of the cool-ing-water supply unit. The clogging of the drum screens inside the unit caused by the surface swarm of the euphausiid Euphausia pacifica Hansen might be responsible for the malfunction. These incidents were of particular interest since such interruption of reactors' operation by krill swarms had not previously been reported. Using samples caught by the drum screens inside the cooling water-supply unit, we investigated the population structure of surface swarms. One occasion of nighttime and three occasions of daytime surface swarms were found in February and April 1997, respectively. The foreguts of more than 60% of E. pacifica in nighttime surface swarm were in full condition. This evidence suggests that E. pacifica aggregates to the surface water at night for feeding. In daytime surface swarms consisting of mature E. pacifica, however, foreguts in full condition were only found in less than 10eio of krill examined, suggesting that daytime surface swarms are closely related to breeding activity. During the study period, the growth rate of mature females was more than twice higher than that of mature males. Analyses of the sex-ratio and length-frequency data show a decrease in the portion of males with increasing size. There was a decline in the number of males of 19 mm in length. Energy loss during spermatophore transfer may result in the death of male E. pacifica, as found in male E. superba.

• Tribology and Lubricants
• /
• v.34 no.3
• /
• pp.107-114
• /
• 2018

This paper presents a computational model of a gas foil journal bearing with shim foils between the top foil and bumps, and predicts its static and dynamic performance. The analysis takes the previously developed simple elastic foundation model for the top foil-bump structure and advances it by adding foil models for the "shim foil" and "outer top foil." The outer top foil is installed between the (inner) top foil and bumps, and the shim foil is installed between the inner top foil and outer top foil. Both the inner and outer top foils have an arc length of $360^{\circ}$, but the arc length of the shim foil is shorter, which causes a ramp near its leading edge in the bearing clearance profile. The Reynolds equation for isothermal and isoviscous ideal gas solves the hydrodynamic pressure that develops within the bearing clearance with preloads due to the ramp. The centerline pressure and film thickness predictions show that the shim foil mitigates the peak pressure occurring at the loading direction, and broadens the positive pressure as well as minimum film thickness zones except for the shortest shim foil arc length of $180^{\circ}$. In general, the shim foil decreases the journal eccentricity, and increases the power loss, direct stiffness, and damping coefficients. As the shim foil arc length increases, the journal eccentricity decreases while the attitude angle, minimum film thickness, and direct stiffness/damping coefficients in the horizontal direction increase.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.961-973
• /
• 2020

In this manuscript, a new pansharpening model based on Convolutional Neural Network (CNN) was developed. Dilated convolution, which is one of the representative convolution technologies in CNN, was applied to the model by making it deep and complex to improve the performance of the deep learning architecture. Based on the dilated convolution, the residual network is used to enhance the efficiency of training process. In addition, we consider the spatial correlation coefficient in the loss function with traditional L1 norm. We experimented with Dilated Residual Networks (DRNet), which is applied to the structure using only a panchromatic (PAN) image and using both a PAN and multispectral (MS) image. In the experiments using KOMPSAT-3A, DRNet using both a PAN and MS image tended to overfit the spectral characteristics, and DRNet using only a PAN image showed a spatial resolution improvement over existing CNN-based models.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.99-103
• /
• 2006

Use of recycled fibers in papermaking has been increased for economical and environmental reasons. Recycled panels are major liber resources for brown grades and newsprints. Since the recycled fibers have disadvantageous properties as raw materials for papermaking it is of great importance to optimize the use of these recycled fibers. OCC (Old Corrugated Containers) is the major fiber source for linerboards and corrugating mediums that require diverse specification in strength properties. Many studies have been focused to overcome the problems of strength reduction of brown grades when recycled fibers are used as raw materials. The problem of strength loss for papers made from recycled fibers is closely associated with the increased amount of fines in recycled fibers and hornification of fibers. Fines contained in the recycled fiber resources cause problems not only in paper properties but also in process runnability. This shows that the optimal management and proper use of fines in recycling papermaking system are critical to get most benefits of using recycled fibers. In this study some approaches for optimal use of fiber fines in recycled paper mill have been investigated. Stock samples, prepared in the laboratory and obtained from a recycling plant were used. Fractionation of these samples was made using Sweco screen. And the effect of the addition of polyelectrolytes including cationic PAM and PEI on drainage and retention was evaluated. Different methods of polymer addition were compared to find the most effective ways of treating recycled fiber stocks with polyelectrolytes. Addition of polyelectrolytes to the short fiber fraction was most effective in retention and drainage. The influence of the charge and molecular weight of these two polymers has been examined and discussed.

• Korean journal of food and cookery science
• /
• v.31 no.2
• /
• pp.144-152
• /
• 2015

The loquat (Eriobotrya japonica) is a plant belonging to the Rosaceae family, native to south-central China. It is cultivated in relatively warm areas such as Spain, Japan and South Korea. It is used commercially as an ornamental plant and for its yellow fruit, which contains much carotenoid, sugar and a little organic acid. In this study, chiffon cakes were prepared with the addition of 3%, 6%, 9% and 12% loquat fruit powder (LFP) in order to invest the mixing conditions. When more LFP was added to the dough, the pH level of the dough became lower. Specific gravity and viscosity of the dough significantly increased as higher amounts of LFP were added. In baked cakes, the weight and baking loss rate of LFP were not significantly different between samples, and the height of the risen test samples were lower than that of the controls. Moisture content was 33.58% in the 12% LFP sample (12% LFPS), which was the highest of all the samples. With respect to crust color, lightness, redness and, yellowness, these significantly decreased as the amount of LFP was increased, the 12% LFP being the lowest of all the samples. Lightness and yellowness of crumbs significantly decreased as the amount of LFP was increased, whereas redness showed the reverse effect. When looking at hardness and adhesiveness, the 12% LFPS was the highest of all the samples, nevertheless a difference in resilience was not significant among the samples. According to consumer perception, bitterness was significantly increased as amounts of LFP increased, however a difference in salty, astringency and oily tastes were not significant among the samples. The 12% LFPS showed the lowest score with respect to softness and overall acceptability. In conclusion, LFP could be considered a functional material, with the optimum amount of LFP for a chiffon cake of 3~9%.

• Food Science of Animal Resources
• /
• v.30 no.4
• /
• pp.626-633
• /
• 2010

This study examined the relationship between meat color and myoglobin content, and evaluated their influence on muscle fiber characteristics and overall pork quality. Four groups of pigs were classified by lightness (CIE $L^*$) and redness (CIE $a^*$): HH, high lightness and high redness; HL, high lightness and low redness; LH, low lightness and high redness; LL, low lightness and low redness. Myoglobin content ranged from 1.2 mg/g to 2.1 mg/g, and was highest in the LH group and lowest in the LL group (p<0.05). Myoglobin content correlated significantly with redness (CIE $a^*$) (r = 0.45, p<0.01). Fiber compositions of type I and IIA were closely related to lightness and redness. Pork with higher sizes of type IIA and IIB fibers had lower lightness and redness, respectively, which was tougher than the other pork. Pork having the highest lightness and lowest redness, often considered "pale", has higher values in drip loss than the other classes of pork tested.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.33.2-34
• /
• 2018

Galaxies associated with massive groups/clusters are normally gas deficient in contrast to field galaxies. HI observations on such galaxies have revealed signs of violent gas stripping, the direct evidence of the environmental effect. At the same time, the notable number of passive galaxies at the cluster outskirts indicates the presence of pre-processing that makes galaxies gas-poor before entering clusters. We investigate the possible channels for the production of the gas deficient galaxies using the state-of-the-art cosmological hydrodynamic zoom-in simulations of 16 clusters (Choi&Yi). We find cluster effect and pre-processing together play an important role in producing the gas-poor galaxies and in both cases gas loss qualitatively agrees with the ram pressure stripping description. Among the currently gas-poor cluster galaxies, 34% are pre-processed before the cluster infall. They are mainly satellites that have undergone ram pressure stripping in group halos. 43% deplete quickly after arriving at cluster during their first approach to the center. Some of them are group halo satellites low in the gas at the infall compared to galaxies directly coming from the field. 24% retain gas even after their first pericentric pass mainly because they are falling into low mass clusters and/or they have a circular orbit that minimizes the ram pressure effect. This study highlights the importance of the past history of galaxies, especially in group halos, before joining the current cluster when understanding the excess of passive galaxies in clusters.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.26 no.1
• /
• pp.15-29
• /
• 1998

The numerical simulation of heavy precipitation event occurred in the central Korean Peninsula on July 26-28, 1996 was performed using the fine mesh model. ARPS (Advanced Regional Prediction System) developed by the CAPS (Center for Analysis and Prediction of Storms). Usually, the heavy rainfalls occurred at late July in the Korean Peninsula were difficult to predict, and showed very strong rainfall intensity. As results, they caused a great loss of life and property. As it usual, this case was unsuccessful to predict the location of rain band and the precipitation intensity with the coarse-mesh model. The same case was, however, simulated well with fine-mesh storm-scale model, ARPS. Moisture band at 850 hPa appeared along the Changma Front in the area of China through central Korea passed Yellow Sea. Also the low-level jet at 700 hPa existed in the Yellow Sea through central Korea and they together offered favorable condition to induce heavy rainfall in that area. The convective activities developed to a meso-scale convective system were observed at near the Yangtze River and moved to the central Korean Peninsula. Furthermore, the intrusion of warm and moist air, origninated from typhoon, into the Asia Continent might result in heavy rainfall formation through redistribution of moisture and heat. In the vertical circulation, the heavy rainfall was formed between the upper- and low-level jets, especially, the entrance region of the upper-level jet above the exit the region of the low-level jet. The low level convergence, the upper level divergence and the strong vertical wind were organized to the very north of the low level jet and concentrated on tens to hundreds km horizontal distance. These result represent the upper- and low-level jets are one of the most important reasons on the formation of heavy precipitation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.237-242
• /
• 2014

In this paper, we find out the lifetime index in order to determine the time-dependent trend of deteriorating performance of 6.6kV high-voltage power cable in operation at a power station. The cable systems used in our study have been in operation for 13 years. With measurements for the 13 years, we analyzed the insulation resistances. By developing measuring equipment (comprized mainly of transformer, temperature sensor, and LPF) operating by the three-phase electric power, we analyzed the changing characteristics of insulation resistance of power cable. In contrast to 22kV cables, 6.6 kV cables have thicker insulation. Therefore the characteristics of 6.6kV cables are different from that of 22kV cables. The study found that as time passes, the insulation resistance does not decrease continuously; it decreases to a certain value, then does not decrease any more and shows properties of oscillation. We could not detect the process of deterioration in the preceding twelve years. The cable system showed great stability so that deterioration was not apparent. In this case, it is not possible to measure the future life indices of power cables because the lifetime indices are not predictable

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.69-74
• /
• 2000

The bandwidth of microstrip slot antenna with T-shaped feed line was a wider than one of the conventional feeding structure. When the slot antenna with bi-directional radiator wants to radiate only one direction, the reflector must be set up seperately. But this antenna doesn't need set up reflector. And then we proposed to a new method of a directional slot radiator with a cross-shaped feedline including the reflector using 2-layers dielectric materials. It is calculated waves and electric field distribution in the time domain by using FDTD method. We also are calculated return loss, VSWR, input impedance, and radiation pattern in the frequency domain by Fourier transforming the time domain results, respectively. It was found that the bandwidth of this antenna changes as length($\I_s$) and width($\W_s$) of slot, length of the horizontal feedline($\I_d$), length of the vertical feedline($\I_u$) and offset sensitively. After optimizing the parameters of design, the maximum bandwidth was measured as 1,850MHz at the center frequency 2.5 GHz.