• Clinics in Shoulder and Elbow
• /
• v.15 no.2
• /
• pp.79-85
• /
• 2012

Objective: It has been expected that patient with posttraumatic recurrent anterior shoulder dislocation might have limited daily life activity because of pain and apprehension of dislocation. But there have been only a small number of investigations regarding the rotator strength in this patient. The aim of this study is to find the characteristics about rotator strength of patient with posttraumatic recurrent anterior shoulder dislocation using an isokinetic testing. Method: We enrolled thirteen patients with posttraumatic recurrent anterior shoulder dislocation and fifteen sex, age-matched healthy nonathletic subjects in this controlled study. All participants were male and there were no significant differences between the two groups in age, height, weight, BMI. Isokinetic internal rotator and external rotator strength was evaluated with a Biodex Isokinetic Testing machine (Biodex Medical Systems, Shirley, NY, USA), tests were performed at 60 deg/sec and 180 deg/sec for both sides. Peak torque normalized to body weight, external rotator to internal rotator ratio, total work and fatigue were calculated for each angular velocity. The association between internal rotator and external rotator strength and shoulder instability was analyzed by comparisons with a control group. Results: Any notable differences could not be found between the two groups given all data from no symptomatic left shoulder. There were no significant differences between the two groups statistically in internal rotation strength of right shoulder. However, there has been a tendency that at all angular velocities, external rotator peak torque to body weight, total work and external rotator to internal rotator ratio were significantly lower in the anterior instability group than the control group at all angular velocities. There was no substantial difference between those groups with respect to the fatigue of external rotator and internal rotator in our study. Conclusion: The prominent characteristics of posttraumatic recurrent anterior shoulder dislocation are external rotator weakness and loss of balance with external rotator and internal rotator. Therefore selective training using this information rotator might be helpful in conservative treatment and rehabilitation.

• Clinical and Experimental Pediatrics
• /
• v.48 no.5
• /
• pp.545-550
• /
• 2005

Purpose : Newborn brain tissue has to be dissociated into a single cell suspension for flow cytometric analysis of cell death during hypoxia-ischemia. Thus the development of a method to dissociate cells from the brain tissue with least damage and maintenance of membrane and antigen integrity remains the challenge for the in vivo application of this technique. We evaluated the efficacy of mechanical or enzymatic (collagenase or tryspin) methods of brain tissue disaggregation. Methods : The extent of the damage to the plasma membrane and loss of the characteristics of the membrane induced with each dissociation method was determined by comparing the flow cytometric results labeled with both fluorescent annexin V and propidium iodide of the newborn rat pup brain tissue in the control group (n=10) and in the 48-hour after hypoxia-ischemia group (n=10). Results : In the control group, the cell percentage of damaged, apoptotic and necrotic cells of both hemispheres with the mechanical dissociation method was significantly increased compared to the trypsin or collagenase method. In the 48-hour after hypoxia-ischemia group, the cell percentage of apoptotic and necrotic cells of the right hemisphere with the collagenase method significantly increased, and live cells significantly decreased compared to the left hemisphere, control group. Although the same trend was observed, the extent of alterations made with the trypsin method was significantly less compared to the collagenase method. Conclusion : The dissociation of neonatal brain tissue for flow cytometric analysis with collagenase was most efficacious with the least cell damage and preservation of the plasma membrane characteristics.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.493-502
• /
• 2006

The slaughter weight (wt) is a most important economic factor in swine roduction. The present study was undertaken to determine if it is feasible to increase the slaughter wt of finishing pigs to 130kg without significantly affecting the growth efficiency and carcass quality. One hundred and sixty gilts and 160 barrows born from lean-type Yorkshire×Landrace (YL)-dam and Duroc (D)-sire lines, which are most widely used for terminal breeding for pork production in Gyeongsangnam-do, were randomly allocated into 16 pens under a 2 (sex)×2 (slaughter wt; 110 vs. 130kg) factorial arrangement of treatments. The animals were fed ad libitum a diet containing 3,200kcal DE/kg and 15.5% crude protein. After slaughter at the predetermined wt, yields of trimmed primal cuts and physicochemical characteristics of the longissimus dorsi muscle (LD) were measured or analyzed. Average daily gain was greater (P<0.01) in barrows than in gilts (0.86 vs. 0.79kg), but it was not different between the 110- and 130-kg slaughter wt groups (P>0.05). Backfat thickness was greater in the 130- vs. 110-kg group in both sexes (gilts: 21.6 vs. 17.6 mm, barrows: 25.1 vs. 20.8 mm). The yield percentage of belly was greater in barrows than in gilts (21.2 vs. 20.5%) and also in the 130-kg vs. 110-kg group (21.4 vs. 20.2%). Major physicochemical characteristics of LD including the color, percentage of 48-h drip loss, 24-h pH and percentages of crude protein and fat were not influenced by slaughter wt. Marginal profit of the 130-kg vs. 110-kg market pig was approximately 󰠏20,000 won/head, which resulted primarily from the heavy carcass weight of the former exceeding the upper limit of the A- or B-grade. However, if it had not been for the carcass weight limit of the current grading system, a 130-kg market pig would have had a potential marginal profit greater than 20,000 won. Results suggest that slaughter wt of lean-line finishing pigs can be increased to 130kg without significantly compromising the growth efficiency and carcass quality and accordingly, the upper weight limit of the ‘good-grade’ carcass needs to be increased or abolished to accommodate the larger market pigs.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.4
• /
• pp.391-397
• /
• 2011

The use of Hydrogen as a fuel is receiving considerable attention and as a result, research on novel methods of hydrogen production is necessary so that the hydrogen demands in the future can be satisfied. This study presents experimental data on methanol Autothermal Reformation that quantifies the relationship between the oxygen-to-methanol ratio ($O_2/CH_3OH$) and reformer efficiency. For each catalyst configuration, the $O_2/CH_3OH$ was varied from 0.1 to 0.4, with an increment of 0.05, to investigate the effects of $O_2/CH_3OH$ on the reactor performance, including temperature profile, conversion, and efficiency. $O_2/CH_3OH$ was increased from 0.15 to 0.20, and the catalyst bed temperature increased by $235^{\circ}C$ to approximately $550^{\circ}C$. The catalyst bed temperature increased with increasing $O_2/CH_3OH$ as the reaction shifted from endothermic to exothermic reaction and as a result, excess heat, which raised the reactor temperature, was generated. The reactor performance was shown to be highly dependent on $O_2/CH_3OH$. The optimum $O_2/CH_3OH$ = 0.30 found in the experimental tests is 30% higher than the theoretical optimum of 0.23. This is attributed to a combination of factors such as the concentrations of the $O_2$ and $CH_3OH$ gas, reaction rate, catalyst effects, heat loss from the reactor, and the difference between the actual amounts of reaction products formed and the theoretical amounts of the reaction products.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.10-16
• /
• 2011

Purpose: The partial volume effect occurs because of limit of the spatial resolution. It makes partial loss of intensity and causes SUV to be lower than it should actually be. So the purpose of this study is to calculate recovery coefficient for correcting PVE from phantom study and to compare before and after SUV correction applying to PET/CT examination. Materials and Methods: The flangeless Esser PET phantom consisting of four hot cylinders was used for this study. All of the hot cylinders were filled with FDG solution of 20.72 MBq per 1000 ml, and the phantom background was filled with FDG solution of different concentrations (33.30, 22.20, 16.65 MBq per 6440 ml) to yield H/B ratios of around 4:1, 6:1 and 8:1. Using the Biograph Truepoint 40(SIEMENS, Germany), we applied recovery coefficient method to 30 patients who were diagnosed with lung cancer after PET/CT exam. And then we analyzed and compared SUV before and after correcting partial volume effect. Results: The smaller the diameter of hot cylinder becomes, the more recovery coefficient decreased. When we applied recovery coefficient to clinical patients and compared SUV before and after correcting PVE, before the correction all lesions gave an average max SUV of 7.83. And after the correction, the average max SUV increases to 10.31. The differences in the max SUV between before and after correction were analyzed by paired t test. As a result, there were statistically significant differences (t=7.21, p=0.000). Conclusion: The SUV for quantification should be measured precisely to give consistent information of tumor uptake. But PVE is one of factors that causes SUV to be lower and to be underestimated. We can correct this PVE and calculate corrected SUV using the recovery coefficient from phantom study. And if we apply this correction method to clinical patients, we can finally assess and provide quantitative analysis more accurately.

• Food Science and Preservation
• /
• v.20 no.4
• /
• pp.583-591
• /
• 2013

Atopic dermatitis (AD) is a common chronic inflammatory disease associated with a cutaneous hypersensitivity reaction to an allergen. Although the incidence of AD is increasing these days, therapeutics has yet to be developed for its treatment. The aim of this study was conducted in order to compare and investigate the characteristic between the Castanea crenata inner shell extract (CS) and the Castanea crenata inner shell extract fermented by Lactobacillus bifermentans (FCS) for an anti-atopic medication. The total polyphenol and flavonoid contents were similar to CS and FCS. In the DPPH and superoxide anion radical scavenging, the CS and FCS had the potential for antioxidant activities. Both of them did not exhibit cytotoxicity to HS68 cells. The evaluation of the anti-inflammatory activity in Raw264.7 cells demonstrated that the FCS has inhibited the LPS-induced production of nitric oxide as compared to the CS. The anti-atopic dermatitis test was done through the induction of DNCB in AD hairless mice. The FCS has inhibited the development of the atopic dermatitis-like skin lesion by transdermal water loss, melanin and erythema of the skin as compared to the CS. Moreover, the pro-inflammatory cytokine IL-$1{\beta}$ and TNF-${\alpha}$ production in hairless mice were inhibited by the FCS treatment. It indicates that the fermentation of the Castanea crenata inner shell has the potential for the treatment of atopic dermatitis.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.471-480
• /
• 2007

The aim of the present study was to determine the effects of a low-energy finisher diet on feed and growth efficiencies and carcass traits of ‘high’-market weight (MW) finishing pigs and thereby to extrapolate optimal dietary energy level for the high-MW swine. A total of 160 (Yorkshire × Landrace) × Duroc-crossbred finishing gilts and barrows weighing approximately 90 kg were fed a low-energy (3,200 kcal DE/kg) diet (LE) or control (3,400 kcal) diet (CON) ad libitum in 16 pens up to 135- and 125-kg live weights, respectively, at which the animals were slaughtered and their carcasses were analyzed [2 (sex) × 2 (diet) factorial experimental design]. Average daily gain, average daily feed intake and feed efficiency did not differ between the two sex or diet groups. Backfat thickness was less (P<0.05) in LE (22.4 mm) than in CON group (24.3 mm) in gilts, but not in barrows (24.4 ± 0.4 mm). The percentage of C- & D-grade carcasses was over 90% because of the ‘over-weight’ problem in gilts, whereas in barrows, percentages of A plus B grades and C plus D grades were 79% and 21%, respectively. The yield percentage of each trimmed primal cut per total trimmed cuts (w/w) did not differ between the two sex or diet groups. Physicochemical characteristics of longissimus muscle including color (lightness and redness), pH, drip loss and chemical composition, which overally were within the range of normal carcass, also did not differ between the two sex or diet groups. In conclusion, both LE and CON are judged to be adequate for the high-MW swine during the latter finishing period. If fat deposition of a given herd of high-MW pigs needs to be suppressed by a dietary treatment, the energy content of the diet will have to be reduced to a level lower than 3,200 kcal DE/kg.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.2
• /
• pp.127-132
• /
• 2019

Purpose: The aim of this study was to determine if preoperative temporary discontinuation of antiplatelet medication (aspirin, clopidogrel, or cilostazol) is a safe procedure that does not increase early postoperative bleeding and allogenic blood transfusion after a total knee arthroplasty. Materials and Methods: A retrospective analysis was conducted among consecutive patients who underwent navigation assisted primary total knee arthroplasty performed by a single surgeon, from January 2013 to December 2016. A total of 369 patients enrolled in this study were divided into two groups, 271 patients with no history of antiplatelet therapy and 98 patients who underwent 7 days of temporary withdrawal of antiplatelet therapy. Comparative analysis between the two groups, on the variation of hemoglobin and hematocrit during the first and second postoperative days, was conducted to determine the amount of early postoperative bleeding and the frequency of allogenic blood transfusion during hospitalization. Results: The variation of hemoglobin, hematocrit during the first and second postoperative days and the frequency of allogenic blood transfusion between no history of antiplatelet medication and discontinuation antiplatelet medication before 7 days from surgery were similar in both groups. Of the 369 patients, 149 patients received a blood transfusion during their hospitalization. Compared to patients who did not receive a blood transfusion, those who did received blood transfusion were significantly older in age, smaller in height, lighter in weight, and showed significantly lower preoperative hemoglobin and hematocrit values. No statistically significant differences in sex, preoperative American Society of Anesthesiologists scores, and the history of antiplatelet medication until 7 days prior to surgery were observed between the two groups according to blood transfusion. Conclusion: Compared to patients with no history of antiplatelet medication, the temporary discontinuation of antiplatelet medication 7 days prior to surgery in patients undergoing antiplatelet medication did not increase the amount of postoperative bleeding or the need for allogenic blood transfusion.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.

• Natural Product Sciences
• /
• v.11 no.3
• /
• pp.139-144
• /
• 2005

Bioflavone quercetin is believed to play an important role preventing bone loss by affecting osteoclastogenesis and regulating many systemic and local factors including hormones and cytokines. This study examined how quercetin acts on tumor necrosis factor-alpha ($TNF-{\alpha}$)-mediated apoptosis in MC3T3-E1 osteoblastic cells. Apoptosis assays revealed the dose-dependent acceleration of quercetin on $TNF-{\alpha}-induced$ apoptosis in MC3T3-E1 cells, which was demonstrated by the increased number of positively stained cells in the trypan blue staining and TUNEL assay, and the migration of many cells to the $sub-G_0/G_1$ phase in flow cytometric analysis. In particular, quercetin treatment alone increased the expression of p53 and p21 proteins in the cells. Consequently, this study showed that quercetin accelerates the $TNF-{\alpha}-induced$ apoptosis in MC3T3-E1 osteoblastic cells.