• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.162-169
• /
• 2006

A Micorstrip Bandpass Filter Using DBRs for WLAN ($2.3{\sim}2.4GHz$) applications is designed and an EBG structure is employed in the ground plane of the filter to suppress the stopband responses of the filter. The number of DBRs is chosen as two in consideration of low insertion loss and small size of two filter. The center frequency of the filter to be designed is 2.35GHz and its bandwidth is 140MHz. The responses of two kinds of DBR filters (one with EBG and the other without EBG) are calculated and compared with the measurements. The experimental results are in good agreement with the calculations: The bandwidth and insertion loss of the filter with EBG structure are 3.8% and 1.7dB respectively, while those of the filter without EBG structure are 7% and 1.23dB. It is shown that the insertion loss of the filter is increased and its bandwidth is deceased due to the EBG structure. Also the stopband responses of the filters with EBG structures are shown to be much improved compared with those without EBG.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.9
• /
• pp.11-18
• /
• 2002

This paper presents a CPW phase shifter and shunt stub with air-bridge on a 10-${\mu}m$-thick oxidized porous silicon(OPS) substrate using surface micromachining. The line dimensions of the CPW phase shifter was designed with S-W-Sg = 100-30-400 ${\mu}m$. And the width and length of the air-bridge with "ㄷ“ shape were 100 ${\mu}m$ and 400-460-400 ${\mu}m$, respectively. In order to achieve low attenuation, stepped air-bridge CPW phase shift was proposed. The insertion loss of the stepped air-bridge CPW phase shift is more improved than that of no stepped air-bridge CPW phase shift. The measured phase characteristic of the fabricated CPW phase shifter is close to 180$^{\circ}$ over a very broad frequency range of 28 GHz. The measured working frequency of short-end series stub is 28.7 GHz and the return loss is - 20 dB. And the measured working frequency of short-end shunt stub is 28.9 GHz and the return loss is - 23 dB at midband. As a result, the pattering of stub in the center conductor of CPW lines can offer size reduction and lead to high density chip layouts.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.12-19
• /
• 2015

In this paper, temporal variations of acoustic transmission loss (TL) affected by internal tide are studied by computer simulation using oceanic data measured in the southern sea of Jeju Island in summer. Temperature was measured with depth (bottom depth are nearly 80 m) in two sites near Seogwipo coast every one hour for 25 hours during July 27 and 28, 2009. The periodic fluctuation of temperature due to the internal tide was observed and its vertical displacement was more than 10 m. In order to investigate temporal variation of TL by internal tide, acoustic propagation between two measurement sites (3.8 km distance) was simulated with a source depth of 10 m. TL variation for 1/3 octave band of 100 Hz center frequency highly coincided with tidal period but more complex variation with indistinct tidal period was observed for 1 kHz. Maximun standard deviation of TL variation was 4.2 dB for 100 Hz at 2.8 km distance from a source and it was 3.7 dB for 1 kHz. The tidal variation was also shown in detection range and its maximum variance was less than 1 km. These results imply that temporal variation of TL should be considered for acoustic researches at the southern sea of Jeju Island.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.2 s.57
• /
• pp.356-368
• /
• 1997

In effort to determine whether aircraft noise can have health effects such as hearing loss, hypertension and psychological stress, a total of 111 male professors and administrative officers working a college near a military airport in Korea(exposed group) and a total of 168 males and 112 females matched by age groups(control groups) were analyzed. Personal noise exposure and indoor and outdoor sound level of jet aircraft noise were measured at the exposed are3. And pure tone, air conduction test and measurement of blood pressure were given to the exposed(males) and matched control groups (males and females). BEPSI(Brief Encounter Psychological Instrument) and psychological response to aircraft noise were examined for the exposed group. The noise dosimetry results revealed time-weighted averages(TWAs) that ranged from 61 to 68 dBA. However the levels encountered during taking off jet airplanes reached 126 dBA for two half minutes time period. Th, audiometric, test showed that mean values of HTL(hearing threshold level) in exposed group at every frequency(500, 1,000, 2,000, 4,000, and 8,000 Hz were much lower than them of male and female control groups. And in old age groups, interaction of age and noise was observed at 8,000 Hz in both ears(p<0.05). Conclusively, aircraft noise does not appear to induce hearing loss directly in high frequency, but may decreased hearing threshold level by interaction of aging process and noise exposure. However, difference of mean values of exposed and control groups on blood pressure was not significantly. In psychological test, annoyance was the most severe psychological response to noise in exposed group, but mean value of BEPSI was not correlated with job duration in exposed group.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.29-38
• /
• 2004

In this study, we investigated the thermal properties of corn-starch filled polybutylene succinate-adipate (PBS-AD) bio-composites. Thermal analysis (TA) is used to describe the analytical method for measuring the chemical property and weight loss of composite materials as a function of temperature. The thermal stability of corn-starch was lower than that of pure PBS-AD. As corn-starch loading increased, the thermal stability and degradation temperature of the bio-composites decreased and the ash content increased. It can be seen that the degree of compatibility and interfacial adhesion of the bio-composites decreased because of the increasing mixing ratio of the corn-starch. As the content of corn-starch increased, there was no significant change in the glass transition temperature (T_g) and the melting temperature (T_m) for the bio-composites. The storage modulus (E') and loss modulus (E") of the corn-starch flour filled PBS-AD bio-composites were higher than those of PBS-AD, because of the incorporation of corn-starch increased the stiffness of the bio-composites. At higher temperatures, the decreased storage modulus (E') of bio-composites was due to the increased polymer chain mobility of the matrix polymer. From these results, we can expect that corn-starch has potential as a reinforcing filler for bio-composites. Furthermore, we recommend using a coupling agent to improve the interfacial adhesion between corn-starch and biodegradable polymer.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1123-1131
• /
• 2023

This study aimed to present a method to effectively suppress metal artifacts caused by spinal fusion surgery during spinal MRI study. For this purpose, a phantom made of spinal surgery screws was created to reproduce the metal artifact. Then, images were acquired with 1.5T and 3.0T MRI to evaluate changes in metal artifacts according to magnetic field strength. In addition, metal artifacts were evaluated by increasing the receive bandwidth to 200, 400 and 800 Hz/PX. As a result, metal artifacts occurring in images obtained from the 1.5T MRI decreased by approximately 52.2% compared to images obtained from the 3.0T MRI, showing a significant difference (p<0.05). In particular, the signal loss and signal pile up areas were reduced by approximately 52.81% and 42.71%, respectively, showing a significant effect in suppressing metal artifacts. On the other hand, when images were acquired while increasing the receive bandwidth from 200 to 800 Hz/PX, there was no significant effect, with a decrease of up to 8.93% for the 1.5T MRI and up to 10.98% for the 3.0T MRI (p>0.05). As a result of this study, increasing the receive bandwidth reduced signal loss and reduced some metal artifacts, but did not have a significant effect because it did not suppress signal pile up. However, when the magnetic field strength was reduced from 3.0T to 1.5T, signal loss and signal pile up were greatly reduced, effectively improving the metal artifact. Therefore, in order to suppress metal artifacts caused by spinal fusion surgery, study using a low magnetic field MRI can be said to be the most effective method.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.5
• /
• pp.484-493
• /
• 2024

This paper discusses the process and results of experimental research aimed at reducing Underwater Radiated Noise (URN) using air injection technology. Air Lubrication System (ALS) is an air injection technology mainly installed and operated to improve the propulsion efficiency of large commercial ship, such as LNGC. Recently, research institutes have been studying the potential of reducing URN using ALS. This paper performs an experiment as part of such research. The experiment was conducted in the Large Cavitation Tunnel (LCT), and the major devices applied in the experiment fall into two categories: ALS, which is directly applied to the model in use for LNGC and a modified air injection belt developed from the Masker-Air System (MAS), which is being developed to reduce URN of naval ships. The environmental conditions for the experiment mainly include the air injection flow rate and flow speed in the LCT. The flow rate was set to the actual air injection conditions of ALS, and the flow speed was adjusted to two different levels, considering the actual speeds of LNGC. The noise reduction performance was confirmed by calculating insertion loss with and without air injection.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.1
• /
• pp.51-54
• /
• 2000

The aim of this study was to collect fundamental data of taurine contained in the waste water from squid processing. The concentration of taurine and free amino acid was measured during each steps of squid processing as well as from waste of skinned and cooked squid, respectively. As a result, proline concentration reached to $800{\~}997\;mg/100\;g$ and taurine concentration reached to $730{\~}820 mg/100 g$. Comparing with raw squid, $60{\%}$ loss of free amino acid and Bleat reduction of taurine was detected in cooked squid. The concentration of free amino acid in waste water from skinned and cooked squid was $639.1 mg/100 ml, 470.7 mg/100 ml$, respectively. Among those free amino acids, taurine composed of $144.9 mg/100 ml and 117.3 mg/100 ml$ in-waste water from skinned and cooked squid, respectively, and these values were about $30{\%}$ of total free amino acids. Other major amino acids were isoleucine, alanine, fosine, leucine, glycine and. glutamate.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.255-263
• /
• 2009

This study assessed the facility volume distribution for artificial reefs (ARs) deployed at the sea bottom in fishing grounds in the Busan Sea region, and estimated the efficient use of volume in the initial AR group. Analysis of the volume of AR facilities in the Busan Sea region indicated that the quantity and surface areas of deployed facilities varied greatly between 1997 and 2004. However, a rapid decrease in AR facility volume after 2003 indicated an increased use of different kinds of ARs, such as steel or ceramic ARs. And the results revealed that a total of 2,777 AR facilities were deployed in the Gijang sea region with a founding ratio of 89%; corresponding numbers for the Heaundae and Namgu sea region were 7,691 and 84.9%, and 905 and 96% for the cubic type of AR in the Saha and Gangseo sea regions. The analysis indicated that ARs deployed in the Busan sea region maintained a good conservation ratio of more than 85%. The loss in AR volume (approximately 15%) was due to subsidence, breakaway, and incomplete deployment.

• Korean journal of applied entomology
• /
• v.56 no.2
• /
• pp.171-177
• /
• 2017

Plant parasitic nematodes, Meloidogyne and Pratylenchus spp., are mostly detected in imported bulbs and tubers including a ginger, Zingiber officinale in Korea by quarantine inspection. However, there is little information on hot water immersion treatment (HWIT) for control of exotic nematodes, which induce economic loss by discard or send back to exporter, in imported gingers. In here, we determined that mortality of two plant parasitic nematodes and thermal stability of ginger. Meloidogyne and Pratylenchus spp. were completely killed at $48^{\circ}C$ and $49^{\circ}C$ for 30 sec by HWIT. Thermal conduction of Z. officinale to reach a target temperature as $50^{\circ}C$ take 10~32 min and 6~16 min for core and inner 5 mm region from surface, respectively. When ginger exposed at $51^{\circ}C$ for 30 min, growth of Z. officinale was not affected by heat treatment compared with control. Based on these results, HWIT at $51^{\circ}C$ for 30 min completely killed artificially infected juveniles of Meloidogyne spp. in Z. officinale. Therefore, this condition for HWIT will be used as fundamental information on phytosanitory to kill two plant parasitic nematodes without damage on ginger.