• Food Science of Animal Resources
• /
• v.36 no.3
• /
• pp.309-318
• /
• 2016

In this study, we investigated the effects of reducing fat levels from 30% to 25, 20, and 15% by substituting pork fat with water and pumpkin fiber (2%) on the quality of frankfurters compared with control. Decreasing the fat concentration from 30% to 15% significantly increased moisture content, redness of meat batter and frankfurter, cooking loss, and water exudation, and decreased fat content, energy value, pH, and lightness of meat batter and frankfurter, hardness, cohesiveness, gumminess, chewiness, and apparent viscosity. The addition of 2% pumpkin fiber was significantly increased moisture content, yellowness of meat batter and frankfurter, hardness, cohesiveness, gumminess, chewiness, and apparent viscosity, whereas reduced cooking loss and emulsion stability. The treatment of reduced-fat frankfurters formulated with 20 and 25% fat levels and with pumpkin fiber had sensory properties similar to the high-fat control frankfurters. The results demonstrate that when the reduced-fat frankfurter with 2% added pumpkin fiber and water replaces fat levels can be readily made with high quality and acceptable sensory properties.

• Analytical Science and Technology
• /
• v.26 no.6
• /
• pp.375-380
• /
• 2013

Ammonium biflouride ($NH_4HF_2$) digestion was studied for germanium analysis in rock and sediment by inductively coupled plasma mass spectrometry (ICP/MS). QLO-1 and SDO-1 are used for reference materials from USGS. Sediment, basalt and ball clay for GeoPT were chosen as real samples. The loss of germanium in open vessel digestion was well known which can be caused by easy transformation to volatile compounds. But ammonium bifluoride digestion could suppress loss of germanium in open vessel digestion. Germanium recovery was not influenced by hydrogen peroxide with ammonium bifluoride digestion. Furthermore, the new method was simple and rapid in germanium analysis by ICP/MS. MDL(method detection limit) was 0.015 ${\mu}g/g$ and germanium recovery was 106~128%.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.1
• /
• pp.33-41
• /
• 2014

In a supersonic turbine, A rotor overlap technique reduced the chance of chocking in the rotor passage, and made the design pressure ratio satisfied. However, the technique also made additional losses, like a pumping loss, expansion loss, etc. Therefore, an approximate optimization technique was appled to find the optimal shape of overlap which maximizes the improvement of the turbine performance. The design variables were shape factors of a rotor overlap. An optimal design for rotor overlap reduces leakage mass flow rate at tip clearance by about 50% and increases about 4% of total-static efficiency compared with the base model. It was found that the most effective design variable is the tip overlap and that the hub overlap size is the lowest.

• Archives of Plastic Surgery
• /
• v.43 no.6
• /
• pp.498-505
• /
• 2016

Background Algae have traditionally been used for promotion of hair growth. Use of hair regrowth drugs, such as minoxidil, is limited due to side effects. The aim of this study was to examine a mixture of Saccharina japonica and Undaria pinnatifida (L-U mixture) on hair growth and to compare the promoting effect of hair growth by a 3% minoxidil and a L-U mixture. Methods To evaluate the hair growth-promoting activity, saline, 50% ethanol, 3% minoxidil, and the L-U mixture were applied 2 times a day for a total of 14 days on the dorsal skin of C57BL/6 mice after depilation. Analysis was determined by using a high-resolution hair analysis system, real-time polymerase chain reaction, and H&E staining. Results On day 14, the hair growth effect of the L-U mixture was the same as that of the 3% minoxidil treatment. The L-U mixture significantly (P<0.05) stimulated hair growth-promoting genes, as vascular endothelial growth factor (VEGF) and insulin-like growth factor -1. Increase of VEGF was observed in the L-U mixture group compared with minoxidil and the negative control. In contrast, the L-U mixture suppressed the expression of transforming growth factor-${\beta}1$, which is the hair loss-related gene. In histological examination in the L-U mixture and minoxidil groups, the induction of an anagen stage of hair follicles was faster than that of control groups. Conclusions This study provides evidence that the L-U mixture can promote hair growth in mice, similar to the effect from minoxidil, and suggests that there is potential application for hair loss treatments.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.6
• /
• pp.1435-1447
• /
• 2015

Finance Companies are operating a security solution such as E-DRM(Enterprise-Digital Right Management), Personal information search, DLP(Data Loss Prevention), Security of printed paper, Internet network separation system, Privacy monitoring system for privacy leakage prevention by insiders. However, privacy leakages are occurring continuously and it is difficult to the association analysis about relating to the company's internal and external distribution of private document. Because log system operated in the separate and independent security solutions. This paper propose a systematic chains that can correlatively analyze business systems and log among heterogeneous security solutions organically and consistently based on security documents. Also, we suggest methods of efficient detection for Life-Cycle management plan about security documents that are created in the personal computer or by individual through the business system and distribution channel tracking about security documents contained privacy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.210-211
• /
• 2009

In this study, we propose characteristics improvement methods according to via hole plating method for FBAR Duplexer with US PCS($T_x$:1850MHz~1910MHz, $R_x$:1930MHz~1990MHz) bandwidth which is used for wireless systems. Also, we designed and fabricated 3.8*3.8*1.8mm size microminiature FBAR Duplexer based on this proposal. First of all, in this study, we fabricated pentagon shape resonators by different size to make filter combination, and their quality factor(Q) are 687 with 6.6% of $k_{eff}^2$. Using this resonators, designed 3*2Type $T_x$ filter and 3*4Type $R_x$ filter. The transmission line, which works as phase shifter, is designed with $210{\mu}m$ in width and 18mm in length Stripline type. Inductor, which is used for matching component, is designed with width of $75{\mu}m$, a technically achievable minimum width. And adopted plating method of filling via hole with conductive epoxy for improved grounding and thermal conductivity. Using these configuration with all of the matching component values, we found Duplexer characteristics of -1.57dB ~ -1.73dB in insertion loss, -56dB in attenuation at 1850MHz~1910MHz of $T_x$ band. Also, found -2.71 dB ~ -3.23dB in insertion loss, -58dB in attenuation at 1930MHz~1990MHz of $R_x$ band.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.7-12
• /
• 2008

This paper presents a lateral resistive contact RF MEMS switch using comb drive. Our goal was to fabricate the RF MEMS switch with high reliability and good RF characteristics for front end module in wireless transceiver system. Therefore, comb drive is used for large contact force in order to achieve low insertion loss and small off-state capacitance in order to achieve high isolation. The single crystalline silicon is used for mechanical reliability. As a result, the developed switch showed insertion loss less than 0.44 dB at 2 GHz, isolation greater than 60 dB, and low actuation voltage at 26 V.

• Clinics in Shoulder and Elbow
• /
• v.2 no.1
• /
• pp.53-59
• /
• 1999

Initial treatment of multidirectional instability of the shoulder would be a thorough rehabilitation program. If rehabilitation fails to resolve a patient's symptoms, the most commonly performed surgical procedure remains the inferior capsular shift. Eleven patients who had disabling multidirectional instability of the shoulder were managed with the inferior capsular shift. All of the procedure were performed by means of an anterior approach and a laterally based capsular shift. All of the patients were the contact athletes. The purpose of our study was to evaluate the efficacy of the inferior capsular shift procedure in the contact athletic patients, to review the loss of external rotation postoperatively and to discuss their return to sports. Mean follow up duration was 14.5 months(range, 12 to 24). Pain was relieved postoperatively in all cases and most patients could get stability except one case of recurrent subluxation. The average loss of external rotation and forward flexion after the operation were Y and 30 at last follow up. By the rating scale from American Shoulder and Elbow Society, overall scores improved from 49 points to 85 points. The results were excellent or good in 9 patients(82%) out of 11 patients. In reference to return to sports, 10 patients(91 %) of 11 patients returned to their sports with 7 patients (64%) returning at the same levels of competitiveness. The inferior capsular shift procedure was considered to be a recommendable method for the management of the multidirectional instability of the shoulder.

• Food Science of Animal Resources
• /
• v.34 no.1
• /
• pp.73-79
• /
• 2014

This study was performed to evaluate the quality characteristics of three deboned categories of chicken thigh meat: one which was slaughtered and deboned in the same plant (fresh); one which was slaughtered, deboned, frozen, and thawed in the same plant (frozen-thawed); and the last which was slaughtered in a plant, deboned in a different plant, but then transferred to the original plant (fresh-outside). Surface color, drip loss, 2-thiobarbituric acid reactive substances (TBARS) value, sensory evaluation, and total aerobic bacterial counts of the chicken samples were determined. Moreover, the torrymeter was used to measure the differences in freshness of the chicken meat. The surface color and the TBARS values did not show significant differences among the three categories. However, the total aerobic bacterial counts of fresh-outside and frozen-thawed chicken meat were significantly higher than the fresh chicken meat on the first storage day, and the drip loss of frozen-thawed chicken meat was significantly higher than the fresh-outside and fresh chicken meat. In addition, the sensory evaluation of frozen-thawed chicken meat was significantly lower than the fresh-outside and fresh chicken meat. Torrymeter values were higher in fresh chicken meat than fresh-outside and frozen-thawed chicken meat during the storage period. These results indicate that the quality of frozen-thawed chicken meat is comparatively lower than the fresh chicken meat, and the torrymeter values can accurately differentiate the fresh-outside and frozen-thawed chicken meat from the fresh ones.

• Tribology and Lubricants
• /
• v.31 no.5
• /
• pp.221-228
• /
• 2015

It is possible to prevent a piston from contacting the cylinder by changing the shape of the piston or by applying micro-textures, such as micro-grooves or micro-holes, over the piston surface. Usually, the minimum radial clearance reaches its minimum value at the beginning of the suction stroke because the pressure around the piston is low and almost axisymmetric such that the net pressure force on the piston is not sufficiently high to support the piston from touching the cylinder. In this study, we apply a series of saw-tooth-shaped grooves on the piston surface, and numerically investigate the effects of groove depth, groove angle, and the number of grooves with radial clearance variations using a finite difference method. We conduct a dynamic analysis of the piston for various changes in groove geometries to obtain the minimum radial clearance variation for the entire compression cycle. The minimum radial clearance increases while friction loss decreases when we apply the series of saw-tooth-shaped grooves on the piston. In addition, we analyze the impact of the change in the groove shape variable due to changes in radial clearance. Leakage variations are relevant to radial clearance, but have almost no effect on the groove parameters.