• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.144-152
• /
• 2010

콘크리트 구조물의 FRP를 이용한 보수보강 시 유기계 접착제인 에폭시 수지를 활용한 부착 공법이 일반적으로 사용되고 있으나 터널이나 하수박스 같은 습기가 많은 지역에서는 부착력이 발현되지 못하여 구조물의 보강 및 내구성에 문제가 있는 것으로 나타나고 있다. 이에 본 연구에서는 시멘트계 충진제를 사용하여 습윤 상태에서 콘크리트 구조물을 보강하고자 하였다. 먼저, 각각의 부착력을 알기 위하여 직접 부착실험을 실험을 통해 무기계 충진제가 습윤상태에서도 KS F 4716 규정에 만족함을 알 수 있었다. 반면, 에폭시 접착제는 포화율 100%에서 부착강도가 $0.73N/mm^2$, 14일 $0.84N/mm^2$로 습윤 상태에서의 부착성능에 문제점을 나타내었다. 또한 2차 실험으로 진행된 충진제 두께별 GFRP보강 보의 휨 강도측정에서는 충진제 두께가 10mm, 20mm, 30mmd일 때 각각 113%, 66%, 75%의 보강효과를 보였다. 이에 따라 충진제의 두께가 10mm일 때 안정적인 부착성능을 발휘하는 것을 알 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.197-198
• /
• 2023

This study was conducted as part of research and development of high-strength grout. Accordingly, dolomite aggregate was used as a filler incorporated into the high-strength grout. Dolomite aggregate has a disadvantage of increasing the viscosity of the grout due to higher generation of fine powder than other aggregates. Accordingly, in this experiment, it was confirmed that the viscosity, flow time, and flow of high-strength grout change according to the volume composition ratio of dolomite aggregate and cement-based material. All experiments were conducted based on the Korean Industrial Standard KS F 4044, and the mixing factor was applied according to the composition ratio of the binder and the filler. In the experiment, the amount of fine powder contained in the dolomite aggregate rather than the silica sand used in the past is grasped, and after mixing with the grout accordingly, the mixture is proceeded to measure the viscosity in an unhardened state. In addition, the flow and flow time of the grout are evaluated according to the viscosity. As a result of the experiment, it was confirmed that the viscosity and flow time decreased and the flow increased as the volume composition ratio of the dolomite aggregate to the cement-based material increased.

• 한국도로학회논문집
• /
• 제18권4호
• /
• pp.29-35
• /
• 2016

PURPOSES : The new waste management policy of South Korea encourages the recycling of waste materials. One material being recycled currently is tire-derived fuel (TDF) ash. TDF is composed of shredded scrap tires and is used as fuel in power plants and industrials plants, resulting in TDF ash, which has a chemical composition similar to that of the fly ash produced from coal. The purpose of this study was to evaluate the properties of an asphalt concrete mix that used TDF ash as the mineral filler. METHODS : The properties of the asphalt concrete were evaluated for different mineral filler types and contents using various measurement techniques. The fundamental physical properties of the asphalt concrete specimens such as their gradation and antistripping characteristics were measured in accordance with the KS F 3501 standard. The Marshall stability test was performed to measure the maximum load that could be supported by the specimens. The wheel tracking test was used to evaluate the rutting resistance. To investigate the moisture susceptibility of the specimens, dynamic immersion and tensile strength ratio (TSR) measurements were performed. RESULTS : The test results showed that the asphalt concrete containing TDF ash satisfied all the criteria listed in the Guide for Production and Construction of Asphalt Mixtures (Ministry of Land, Infrastructure and Transport, South Korea). In addition, TDF ash exhibited better performance than that of portland cement. The Marshall stability of the asphalt concrete with TDF ash was higher than 7500 N. Further, its dynamic stability was also higher than that listed in the guide. The results of the dynamic water immersion and the TSR showed that TDF ash shows better moisture resistance than does portland cement. CONCLUSIONS : TDF ash can be effectively recycled by being used as a mineral filler in asphalt, as it exhibits desirable physical properties. The optimal TDF ash content in asphalt concrete based on this study was determined to be 5%. In future works, the research team will compare the characteristics of asphalt concrete as function of the mineral filler types.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.90-91
• /
• 2020

Utilization of upgraded fine fly ash in cement-based materials has been proved by many researchers as an effective method to improve compressive strength of cement based materials at early ages. The addition of fine fly ash has introduced dilution effect, enhanced pozzolanic reaction effect, nucleation effect and physical filling effect into cement-fly ash system. In this study, an integrated reaction model is adpoted to quantify the contributions from cement hydration and pozzolanic reaction to compressive strength. A modified model related to the physical filling effect is utilized to calculate the compressive strength increment considering the gradual dissolution of fly ash particles. Via combination of these two parts, a numerical model has been proposed to predict the compressive strength development of fine fly ash mortar considering fly ash fineness. The reliability of the model is validated through good agreement with the experimental results from previous articles.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권2호
• /
• pp.27-34
• /
• 2024

본 연구는 시멘트 복합체 기반 변형감지 센서 제조를 위한 전도성 충진재로 Fe 활성화된 목질계 바이오차를 사용하는 타당성을 조사하기 위해 진행되었다. Fe에 의해 활성화된 바이오차를 3% 혼입한 시멘트 복합체의 압축강도 및 전기적 특성을 평가하기 위해 50×50×50mm³ 크기의 입방체 시험체 3개와 40×40×80mm³ 크기의 각기둥의 시멘트 복합체 기반 센서 3개를 각각 준비하였다. 시멘트 복합체 기반 센서에는 전기저항 측정의 4탐침 방식이 사용되었다. Fe 활성화된 바이오차를 혼입한 시멘트 복합체 기반 센서의 경우 다양한 함수율 및 반복압축하에서 임피던스와 같은 전기저항과 전도성을 조사하였다. 그 결과 시멘트 복합체 기반 센서의 직류 회로에서의 전기저항률이 시간이 지남에 따라 증가하였고, 저항률의 최대 부분 변화가 900초 동안 함수율이 증가함에 따라 감소하였다. 함수율 7.5% 구간에서 전도성 충진재로 Fe에 의해 활성화된 바이오차를 3% 혼입한 시멘트 복합체의 전도성이 가장 안정적이지만, 시멘트 복합체 기반 변형감지 센서의 압축변형과 비저항의 변화비(FCR)에서 반복압축응력이 증가함에 따라 변형감지능력에 있어서 다소 떨어지는 경향을 나타냈다.

• Geomechanics and Engineering
• /
• 제33권4호
• /
• pp.401-414
• /
• 2023

Organic clays are ideal habitat for flora and fauna. From a geotechnical perspective, organic clays are soft, weak, variable, heterogeneous and flocculated. Portland cement is a universally common stabiliser. However, some organic acids in soil inhibit full hydration and expose cementation products to rapid dissolution. This paper investigates scopes for use of C₃S cement to enable durable cementation. Prospects of using PP fibre alongside with C₃S cement, scopes for partial replacement of C₃S cement with a plant-based nanosilica and evolution of binders are then investigated. Binding mixtures here mimic the natural functions of rhizoliths, amorphous phases, and calcites. Testing sample population include natural and fibre-reinforced clays, compact mixes of clay - C₃S cement, clay - nanobiosilica, and clay, C₃S cement and nanobiosilica. Benefits and constraints of C₃S cement and fibres for retaining the naturally flocculated structure of organic clays are discussed. Nanobiosilica provides an opportunity to cut the C₃S content, and to transition of highly compressive organic clays into an engineered, open-structured medium with >0.5 MPa compressive strength across the strains spanning from peak to 1.5-times peak.

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.675-686
• /
• 2015

The use of ground granulated blast furnace slag (GGBFS) from steel industries waste is showing perspective application in civil engineering as partial substitute to cement. Use of such waste conserves natural resources and minimizes the space required for landfill. The GGBFS used in the present work is of ultra fine size and hence serves as micro filler. In this paper strength and durability characteristics of ultra fine slag based high strength concrete (HSC) (with a characteristic compressive strength of 50 MPa) were studied. Cement was replaced with ultra fine slag in different percentages of 5, 10, and 15% to study the compressive strength, porosity, resistances against sulfate attack, sorptivity and chloride ion penetration. The experiments to study compressive strength were conducted for different ages of concrete such as 7, 28, 56, and 90 days. From the detailed investigations with 16 mix combinations, 10% ultra fine slag give better results in terms of strength and durability characteristics.

• 한국재료학회지
• /
• 제21권9호
• /
• pp.502-508
• /
• 2011

The goal of the present work was to investigate the development of a geopolymeric ceramic material from a mixture of mine residue, coal fly ash, blast furnace slag, and alkali activator solution by the geopolymer technique. The results showed that the higher compressive strength of geopolymeric ceramic material increased with an increase in active filler (blast furnace slag + coal fly ash) contents and with a reduction of mine residue contents. The geopolymeric ceramic had very high early age strength. The compressive strength of the geopolymeric ceramic depended on the added active filler content. The maximum compressive strength of the geopolymeric ceramic containing 20 wt.% mine residue was 141.2 MPa. The compressive strength of geopolymeric ceramic manufactured by adding mine residue was higher than that of portland cement mortar, which is 60 MPa, when cured for 28 days. SEM observation showed the possibility of having amorphous aluminosilicate gel within geopolymeric ceramic. XRD patterns indicate that the geopolymeric ceramic was composed of amorphous aluminosilicate, calcite, quartz, and muscovite. The Korea Standard Leaching Test (KSLT) was used to determine the leaching potential of the geopolymeric ceramic. The amounts of heavy metals were noticeably reduced after the solidification of mine residue with active filler.

• Computers and Concrete
• /
• 제10권6호
• /
• pp.649-662
• /
• 2012

This paper presents the results of an investigation on the compressive strength and weight loss of mortars containing three types of fillers as cement replacements; Limestone Filler (LF), Silica Fume (SF) and Trass (TR), subjected to elevated temperatures including $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$ and $1000^{\circ}C$. Results indicate that addition of TR to blended cements, compared to SF addition, leads to higher compressive strength and lower weight loss at elevated temperatures. In order to model the influence of the different parameters on the compressive strength and the weight loss of specimens, artificial neural networks (ANNs) were adopted. Different diagrams were plotted based on the predictions of the most accurate networks to study the effects of temperature, different fillers and cement content on the target properties. In addition to the impressive RMSE and $R^2$ values of the best networks, the data used as the input for the prediction plots were chosen within the range of the data introduced to the networks in the training phase. Therefore, the prediction plots could be considered reliable to perform the parametric study.

• 대한토목학회논문집
• /
• 제44권5호
• /
• pp.615-627
• /
• 2024

This study presents fundamental research data on the application and utility of biochar in Engineered Cementitious Composites (ECC) for carbon sequestration. The study experimentally measures and compares the compressive strength, tensile strength, and flexural strength of high-toughness biochar-incorporated ECC (BE) and biochar-incorporated mortar (BM) with varying levels of biochar replacement. This study aims to compare BM and BE. BM shows an increase in mechanical properties at a biochar content of 1 %. BE shows an increase in mechanical properties at a biochar content of 2 %. The reason for the increase is that biochar particles fill the voids between the binder materials, acting as a filler. This helps form a denser structure. These findings suggest that incorporating biochar into mortar and ECC can enhance their mechanical properties at optimal biochar contents.