• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.536-543
• /
• 2015

This study describes on the level of back pain knowledge from a survey that conducted from November 1, 2013 to January 31, 2014 for 82 cement factory workers at C region in Chung-Buk. The survey results showed that 56.1% of workers experienced back pain. Also the number of back pain of workers increased when workers who subjected more stresses from their works, had been growth in urban area and have not satisfied their given works. The survey also show that workers who subjected back pain once, usually they stopped smoking and reduced drinking, and they willing to take education for back pain-reducing. The worker's level of back pain knowledge was relatively low scores as 56.29 points in the 100-point conversion score, specially back pain associated with the posture were the lowest point of 50 points. Knowledge of back pain, a positive correlation was observed. Finally workers experienced back pain and education of back pain had higher willing to receive the education in the future. However, workers were not obtained the knowledge information on back pain indicated lower scores.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.31-55
• /
• 1986

Generally, the development of shipping is characterized by the amount of traffic flow (traffic volume) and seaborne cargo in the sea. Movement of ships is an essential element of constructing the traffic flow which is represented the dynamic movement of ships in the sea, but on the other band the numbers of arriving and departing the port is the basic factor consisting of the static movement of ships. The amount of cargoes by coastal vessels and ocean trade vessels have increased tremendously with the great growth of the Korean economy these days. This increase of the seaborne cargoes has made the Korean coastal traffic flow so congested that this can be a cause of large pollution as well as great marine casualities such as a loss of human lives and properties . And also the future coastal traffic is expected to increase considerably according to our economic development and high dependence upon foreign trade. Under the circumstance, to devise the safety of coastal traffic flow and to take a proper step of a efficient navigation, there is a necessity for analyzing and surveying the coastal traffic trend and the characteristics of cargo movement. In order to grasp the dynamic movement of ships in the Korean coast, O/D analysis is executed. This paper aims to secure the basic data necessary for a comprehensive plan and estimation of vessel traffic management system for the enhancement of safety, order and efficiency of vessel traffic in the Korean coast. The analyzed results of the traffic flow and seaborne cargoes of the Korean coast are summarized as follows : 1) The congestion by the vessels occurred around the ports such as-in proportion of ship's number (proportion of tonnage) -Incheon 18.5%(14.8%), Pohang 5.9% (9.9%), Samil 5.2%(8.3%), Mokpo 8.6%(0.8%), Pusan 13.5%(36.4%), Ulsan 9.1%(16.2%). 2) It is found that the area adjacent to Incheon, Pusan, Ulsan, Channel of Hanryu and South-western area are heavily congested. 3) It is confirmed thatthe area adjacent to Incheon, Pusan, Ulsan, Channel of Hanryu and South-western area are heavily congested. 3) It is confirmed that the coastal vessels are main elements constituting the coastal traffic and that there are much traffic flow among five ports as following through the precise O/D analysis of ship's coastal movement. Incheon-Samil, Ulsan, Pusan, Jeju Pusan -Samil, Ulsan, Incheon, Jeju Pohang -Samil, Inchoen, Jeju Pohang -Samil, Incheon, Jeju Ulsan -Samil, Incheon, Jeju Samil -Ulsan, Pusan, Incheon 4) The amount of cargoes to abroad are in proportion about 81% of total and the amount of coastal cargoes are about 19%. Of those, cargoes in and out to Japan are about 26% and to South-east Asia are about 27%. 5) The chief items of foreign cargoes are oil(38.33%), iron ore(13.98%), bituminoous coal(12.74%), grain(8.02%), lumber(6.45%) in the import cargoes and steel material(21.96%), cement(17.16%), oil(6.81%), fertilizer(3.80%) in the export cargoes. 6) The 80.5% of total export cargoes and 92.4% of total import cargoes are flowed in five main ports. 7) The chief items of coastal cargoes are oil (42.45%), cement(16.86%), steel material (6.49%), anthracite(6.31%), mineral product(4.3%), grain, and fertilizer. Almost 92.24% of total import and export oil cargoes in Korea is loaded and unloaded at the port of Samil & Ulsan.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.479-485
• /
• 1999

Materials for posterior teeth includes amalgam, gold inlay and composite resin inlay. Amalgam and gold inlay have unsatisfyine esthetics. And because they simply obturate the cavity preparation, they do not strengthen the remaining tooth structure. Posterior composite resin has become established in recent years. However, its polymerization shrinkage and insufficient wear resistance were the most undesirable characteristic. The physical and mechanical properties of the composite resin inlay are further improved through heat treatment in an oven. The major part of polymerization contraction of the resin inlay takes place be fore cementation, and possible gap formation is only due to shrinkage of the thin layer of resin cement. With the semidirect technique, the inlay material is placed directly in the prepared tooth, and the primary polymerization is made by light activation with a handhold curing unit. Additional curing may take place extraorally with use of different curing ovens. It provides the patient with the benefits of luted restorations without the procedure of indirect lab-made inlay. I report three successfully treated cases by semidirect resin inlay technique. Entire clinical steps are described in detail with some discussions on the outcome.

• International Journal of Highway Engineering
• /
• v.3 no.1 s.7
• /
• pp.185-197
• /
• 2001

This paper dealt with modification of effective crack length model (ECM) by adding Poisson's ratio term to evaluate fracture toughness of asphalt concrete which varies its material property by temperature. The original ECM model was developed for solid materials, such as cement concrete, and Poisson's ratio of materials was not considered. However, since asphalt concrete is sensitive to temperature variation and changes its Poisson's ratio by temperature, it should be taken into consideration to know exact fracture property under various temperatures. Four binders, including 3 polymer-modified asphalt (PMA) binders, were used to make a dense-grade asphalt mixture and 3-point bending test was peformed on notched beam at low temperatures, from -5oC to 35oC. Elastic modulus, flexural strength and fracture toughness were obtained from the test. The results showed that, since Poisson's ratio was considered, the more accurate test values could be obtained using modified ECM equation than original ECM. PMA mixture showed higher stiffness and fracture toughness than normal asphalt mixture under very low temperatures.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.3
• /
• pp.43-51
• /
• 2020

About 90% of groundwater wells in Jeju Island are reported to be under the threat of contamination by infiltration of the surface pollutants. Most of those wells have improperly grouted annulus which is an empty space between the well and the inner casing. As a remedy to this problem, some of the wells were re-grouted by filling the annulus with cement without lifting an inner casing. In order to evaluate whether this method is appropriate for the geological structure of Jeju Island, two wells (W1 and W2) were selected and this method was applied. The water holding capacity did not decrease while the nitrate levels decreased from 16.8 and 20.2 to 6.8 and 13.8 mg/L in W1 and W2, respectively. The higher nitrate level in W2 is deemed to be influenced by the livestock farms located in the upper area of the well. In addition, transmissivity of the vedose zone was higher in W2 than W1, potentially facilitating the transport of nitrate to the groundwater. The overall result of this study suggests re-grouting of wells for the purpose of protecting water quality of goundwater should take into account geological structure of vadose zone as well as appropriate source control of the contaminants.

• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.566-571
• /
• 2014

Recently, with concentrated social and engineering interests on durability, diversified subsequent researches have been progressed. The Chloride-induced corrosion, carbonation, freeze-thaw etc, deterioration factors of concrete act to concrete not privately but complexly, Fly ash is most frequently used admixture which is using a reduction method of deterioration. And the fly ash effects on improvement of durability with enhancement of fluidity, decrease of crack with reduction of hydration heat, promotion of long-age strength and have a economic advantage which replaces cement as a binding material. But, fly ash have different qualities and occasionally reduce the durability and strength by adhesion of AE admixture with unburned carbon powder etc. In this study, the experiments will take about various replacement ratio of fly ash concrete, and will analyze, consider the results, after these will verify applicability and validity as admixture and binding material.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.3
• /
• pp.421-426
• /
• 1994

Twelve cross bred cows ($300{\pm}20kg$) were fed a basal ration consisting of 1 kg concentrate and untreated or urea treated rice with or without urea-molasses-wheat bran lick block supplementation. The lick blocks were prepared locally using cement as a binding agent. The experiment lasted for 48 days consisting of a preliminary period of 14 days and a measurement period of 34 days. Daily dry ma tter intake (DMI) of straw and lick block, and daily milk yield were recorded during the measurement period. Intake of lick block when fed with untreated straw (US) was significantly higher (p < 0.01) than with urea treated (TS) straw (397 vs 307g $100kg^{-1}$), but lick block supplementation did not significantly affect the in take of US (1.80 vs 1.83kg $100kg^{-1}day^{-1}$) or TS (2.27 vs 2.17kg $100kg^{-1}day^{-1}$). Both urea treatment and lick block supplementation significantly increased (p < 0.01) the milk yield of cows, and the increase due to urea treatment was higher than that due to lick block supplementation. Benefit/cost ratio obtained for feeding US or TS with 1 kg dairy concentrate was similar (5.4), but the marginal return favours TS (5.4:1.0). The benefit/cost ratio for US and TS supplemented with lick block was 3.4 and 3.7. respectively, but the marginal return with US was higher than with TS (1.6:1.0 and 0.9:1.0, respectively).

• Computers and Concrete
• /
• v.24 no.6
• /
• pp.541-553
• /
• 2019

Alkali-silica reaction (ASR) in concrete can induce degradation in its mechanical properties, leading to compromised serviceability and even loss in load capacity of concrete structures. Compared to other properties, ASR often affects the modulus of elasticity more significantly. Several empirical models have thus been established to estimate elastic modulus reduction based on the ASR expansion only for condition assessment and capacity evaluation of the distressed structures. However, it has been observed from experimental studies in the literature that for any given level of ASR expansion, there are significant variations on the measured modulus of elasticity. In fact, many other factors, such as cement content, reactive aggregate type, exposure condition, additional alkali and concrete strength, have been commonly known in contribution to changes of concrete elastic modulus due to ASR. In this study, an artificial intelligent model using artificial neural network (ANN) is proposed for the first time to provide an innovative approach for evaluation of the elastic modulus of ASR-affected concrete, which is able to take into account contribution of several influence factors. By intelligently fusing multiple information, the proposed ANN model can provide an accurate estimation of the modulus of elasticity, which shows a significant improvement from empirical based models used in current practice. The results also indicate that expansion due to ASR is not the only factor contributing to the stiffness change, and various factors have to be included during the evaluation.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.1
• /
• pp.21-53
• /
• 1989

In the past twenty years, there has been a rapid increase in the volume of traffic in Korea due to the Korean great growth of the Korean economy. Since transformation provides an infrastructure vital to economic growth, it becomes more and more an integral part of the Korea economy. The importance of coastal shipping stands out in particular, not only because of the expansion limit on the road network, but also because of saturation in the capacity of rail transportation. In spite of this increase and its importance, coastal shipping is falling behind partly because it is givenless emphasis than ocean-going shipping and other inland transportation systems and partly because of overcompetition due to excessive ship tonnage. Therefore, estimating and planning optimum ship tonnage is the first take to develop Korean coastal shipping. This paper aims to estimate the optimum coastal ship tonnage by computer simulation and finally to draw up plans for the ship tonnage balance according to supply and demand. The estimation of the optimum ship tonnage is peformed by the method of Origin -Destimation and time series analysis. The result are as follows : (1) The optimum ship tonnage in 1987 was 358, 680 DWT, which is 54% of the current ship tonnage (481 ships, 662, 664DWT) that is equal to the optimum ship tonnage in 1998. this overcapacity result is in excessive competition and financial difficulties in Korea coastal shipping. (2) The excessive ship tonnage can be broken down into ship types as follows : oil carrier 250, 926 DWT(350%), cement carrier 9, 977 DWT(119%), iron material/machinery carrier 25, 665 DWT(117%), general cargo carrier 17, 416DWT(112%). (3) the current total ship crew of 5, 079 is more than the verified optimally efficient figure of 3, 808 by 1271. (4) From the viewpoint of management strategy, it is necessary that excessive ship tonnage be reduced and uneconomic outdated vessels be broken up. And its found that the diversion into economically efficient fleets is urgently required in order to meet increasing annual rate in the amounts of cargo(23, 877DWT). (5) The plans for the ship tonnage balance according to supply and demand are as follows 1) The establishment of a legislative system for the arrangement of ship tonnage. This would involve; (a) The announcement of an optimum tonnage which guides the licensing of cargo vessels and ship tonnage supply. (b) The establishment of an organization that substantially arrangement tonnage in Korea coastal shipping. 2) The announcement of an optimum ship tonnage both per year and short-term that guides current tonnage supply plans. 3) The settlement of elastic tariffs resulting in the protect6ion of coastal shipping's share from other tonnage supply plans. 4) The settlement of elastic tariffs resulting in the protection of coastal shipping's share from other transportation systems. 4) Restriction of ocean-going vessels from participating in coastal shipping routes. 5) Business rationalization of coastal shipping company which reduces uneconomic outdated vessels and boosts the national economy. If we are to achieve these ends, the followings are prerequisites; I) Because many non-licensed vessels are actually operating and threatening the safe voyage of the others in Korea coastal routes, it is necessary that those ind of vessels be controlled and punished by the authorities. II) The supply of ship tonnage in Korean coastal routes should be predently monitored because most of the coastal vessels are to small to be diverted into ocean-going routes in case of excessive supply. III) Every ship type which is engaged in coastal shipping should be specialized according to the characteristics of its routes as soon possible.