• 한국세라믹학회지
• /
• 제27권7호
• /
• pp.861-868
• /
• 1990

Investigation for the preparation of high strength hardened cement paste using ordinary portland cement, hydroxypropyl methyl cellulose(HPMC) with SiC powder was carried out. The cement paste was mixed with 0.1 of water cement ratio by twin roll mill and cured 60 days in humidity chamber. The hydration degree of cement paste cured with W/C=0.1 in 60 days was about 30% and most pores in the paste were found to be existed as gel pores of diameter less than 0.01㎛. The maximum flexural strength of hardened cement paste was about 960kg/㎠. When the SiC powder was added to the paste, the flexural strength was 1000∼1100kg/㎠ and the Young's modulus was 8∼9×105kg/㎠.

• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.1034-1042
• /
• 1990

Investigation for the preparation of high strength hardened cement paste using ordinary portland cement, hydroxypropyl methyl cellulose(HPMC) with various admixtures was carried out. The cement paste was mixed with 0.1 of water cement ratio by twin roll mill and cured 60 days in humidity chamber. When the quartz powder or white cement was added to the paste, the flexural strength was 900∼1000kg/㎠ and the Young's modulus was 8∼9×105kg/㎠. When the silicafume was added, the flexural strength was 800kg/㎠ and the Young's modulus was 6×105kg/㎠.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.131-134
• /
• 1990

Many papers have been published on drying shrinkage of hardened cement paste and cement mortar. The causes of drying shrinkage in cement mortar may be attributed to its mechanical properties, temperature, curing time and the evaporation of water from cement mortar. This paper deals only with drying shrinkage in cement mortar. In particular, the relationships between water evaporation and drying shrinkage are discussed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.57-60
• /
• 2006

This study proposes the physical properties of the hardened lightweight cement using the polyethylene tube and to make the fundamental data regarding a new lightweight concrete development. The aerated concrete is displaying various effects such as lightweight, insulation characteristic and it is coming to be widely applied the slab layer of apartment as an insulating material but currently the aerated concrete has many problems. Therefore, demonstrating similar property of former aerated concrete and improving the defects, developing new hardened cement is needed. In this study, we predict adopting possibility of hollow core polyethylene tube, as a material to make cement hardening containing a lot of void. So we changed the mixing ratio, a diameter and length of the polyethylene tube and improved the compressive strength and unit capacity weight of the lightweight cement hardening body. From the test results, we judge that the aerated concrete is a developmental possibility.

• Advances in concrete construction
• /
• 제7권1호
• /
• pp.31-37
• /
• 2019

This paper evaluates the workability and hardened properties of self-compacting concrete (SCC) containing silica fume as the partial replacement of cement. SCC mixtures with 0, 2, 4, 6, 8 and 10% silica fume were tested for fresh and hardened properties. Slump flow with $T_{500}$ time, L-box and V-funnel tests were performed for evaluating the workability properties of SCC mixtures. Compressive strength, splitting tensile strength and modulus of rupture were performed on hardened SCC mixtures. Experiments revealed that replacement of cement by silica fume equal to and more than 4% reduced the slump flow diameter and increased the $T_{500}$ and V-funnel time linearly. Compressive strength, splitting tensile strength and modulus of rupture increased with increasing the replacement level of cement by silica fume and were found to be maximum for SCC mixture with 10% silica fume. Further, residual hardened properties of SCC mixture yielding maximum strengths (i.e., SCC with 10% silica fume) were determined experimentally after heating the concrete samples up to 200, 400, 600 and $800^{\circ}C$. Reductions in hardened properties up to $200^{\circ}C$ were found to be very close to normal vibrated concrete (NVC). For 400 and $600^{\circ}C$ reductions in hardened properties of SCC were found to be more than NVC of the same strength. Explosive spalling occurred in concrete specimens before reaching $800^{\circ}C$.

• 한국건축시공학회지
• /
• 제15권5호
• /
• pp.451-456
• /
• 2015

본 연구는 시멘트계 바탕 바름재에 사용되는 바닷모래를 대체하기 위한 재료로서 현무암 가공과정에서 발생되는 현무암 석분슬러지를 재활용하기 위해 현무암 석분슬러지를 사용한 경화모르타르의 특성(연도변화, 응결경화, 흡수계수, 건조수축, 그리고 부착강도 실험)을 평가하였다. 현무암 석분슬러지를 사용한 경화모르타르는 콘크리트 바탕 바름재에 사용되는 기존의 보통모르타르의 특성과 유사하거나 좀 더 향상된 성능을 보였다. 그러나, 현무암 석분슬러지를 사용한 경화모르타르는 보통 모르타르보다 재령 8~9일 이후 건조수축이 증가되었고 부착강도는 감소되었다. 그러나 현무암 석분슬러지를 사용한 경우, KS F 4716 '시멘트계 바탕 바름재'에서 요구하는 최소 품질 규준은 만족하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.69-72
• /
• 1999

In this study, we blended 2 grades of ultra fine cement using the results of previous stud. And the cement slurry was produced by water each water/cement ratio. The slurries were observed hydration phenomena during 28 days with SEM, XRD and DSC. The specimen made by slurry were evaluated with the hardened properties such as compressive strength, flexural strength length change and water absorption. And were tested the adhesive strength of specimen made by injecting the slurry between mortar bars.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.113-114
• /
• 2017

In this study, the change of composition of cement hardened at high temperature through XRD was observed. The specimen was made of cement paste and the heating rate condition was applied at rapid thermal annealing (10.0℃ / min). The decrease of calcium hydroxide was not confirmed, but the calcium carbonate tended to be impossible or decreased after 800℃. Calcium silicate and larnite were observed to increase with increasing temperature. It is considered that silicic acid, which is a stable structure due to the decomposition of calcium silicate, is changed into a phase such as lime.

• 한국세라믹학회지
• /
• 제27권5호
• /
• pp.589-596
• /
• 1990

In this study, the freezing and thawing resistance in sea-water of hardened cement paste was investigated by adding slag, diatomaceous earth and fly ash as blending materials and air entraining agent and superplasticizer as admixtures to the cement paste. The structure of hardened cement pate was densified by potential hydraulic properties and pozzolan reactivities of materials and the freezing and thawing resistance of the paste was improved with the effect blending materials and admixtures. As the blending materials were added to the paste, the quantity of C3A was relatively reduced and the formation of expansive ettringite was suppressed to decrease the penetration of sea-water or Cl-, SO42-ion, and then freeze-thaw resistance was enhanced. Particulary, when 40% of slag was mixed, the resistance was excellent.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.532-540
• /
• 1988

Even the finest cement as having a specific surface area of 6.000~8.500$\textrm{cm}^2$/g (Blaine) is to convert into low-porosity hardened cement paste by the use of appropriate plasticizer. In this study, tests were carried out on such a special cement mix(fineness of 6.000$\textrm{cm}^2$/g, Ca-lignosulfonate plus k2CO3 as plasticizer and W/C=0.25) in comparison with ordinary Portland cement. Owing mainly to the high fineness of the cement powder and the low water-to-cement ratio, the hardened low-porosity cement paste showed a very tight microstructure, the pore texture of which consisted of micropores and wide pores only of small radii. The consequence of such mix was hence that the low-porosity special cement had excellent properties of early-high and very high strengths as compared to ordinary Portland cement. Its volume change when dried in the air or re-wetted, exhibited superor behaviour as well.