• International Journal of Highway Engineering
• /
• v.2 no.3
• /
• pp.129-144
• /
• 2000

This paper presents the characteristics of viscoelastic properties and fatigue performance of SBS modified asphalt mixtures depending on the aggregate gradation. Dynamic shear rheometer (DSR) and uniaxial tensile creep tests are performed to analyze the thermomechanical behavior of asphalt binders and mixtures, respectively. Uniaxial tensile fatigue tests for seven different asphalt mixtures are conducted to evaluate the effects of aggregate gradations and SBS modifier on the fatigue performance of the mixtures. DSR and uniaxial tensile creep tests results show that the SBS modified asphalt mixtures have better rutting resistance than the unmodified mixtures at high temperatures regardless of the aggregate gradations used. Fatigue factor $G^*sin\delta$ in Superpave binder specification may not be adequate for evaluating the fatigue Performance of asphalt mixtures. It is observed from uniaxial tensile fatigue tests that SBS modified asphalt mixtures compared to unmodified mixtures have ten times longer fatigue lives regardless of the aggregate gradations(dense, SMA, and Superpave gradations) used in the mixtures. The better fatigue performance of the SBS modified mixtures is observed even after long-term aging process. The effect of aggregate gradations on the fatigue performance is not as significant as the SBS modifier. The cellulose fiber added in the SMA mixture has negligible effects on the viscoelastic Properties and fatigue performance of the mixture, but is effective in reducing draindown. Although the SBS modified asphalt binder is used, it may be necessary to add the cellulose fiber into the SMA mixture to prevent the draindown.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1435-1439
• /
• 2005

Bacterio-mineral water (BMW) produced from manure has been known to exert a number of positive effects on animal production and odor control. An experiment was conducted to examine the effects of BMW produced from bio-reacted swine manure on in vitro gas production, cellulose degradation, microbial growth and fibrolytic enzyme activities of mixed rumen microorganisms. The five levels of 0, 0.001, 0.005, 0.01 and 1.0% BMW were supplemented into serum vials containing mixed rumen microorganisms. Incubations were carried out anaerobically at $39^{\circ}C$ without shaking for 0, 12, 24, 48, 72 and 96 h. There were no significant (p>0.05) differences among the treatments for the initial rate of gas production. At 72 h incubation, the gas production tended (p<0.1) to be increased by the 0.01 and 1.0% BMW treatments compared with control and the 0.001% BMW treatment. At the end of incubation (96 h), the sample supplemented with 0.01% BMW was higher (p<0.05) than control (0% BMW) in the gas production. The microbial growth rate was increased by all the BMW treatments, while 0.01% BMW was most effective in stimulating the growth rate. Although the addition of BMW on the filter paper DM degradation was not significantly influenced throughout the incubation period except the 48 h incubation, DM degradation tended to be increased by all BMW treatments compared with control. The addition of both 0.005 and 0.01% BMW highly increased (p<0.05) CMCase activity compared with control after 24 h and 48 h incubation, while at the 72 h incubation the 0.01% BMW addition only significantly increased (p<0.05). After 72 h incubation, the xylanase activity was significantly (p<0.05) increased with the addition of 1.0% BMW compared with the addition of 0.001 and 0.005% BMW, while at the other incubation times, the xylanase activity was not different among the treatments. In conclusion, the 0.01% BMW of supplementation level would be the suitable addition level to stimulate rumen fermentation increasing microbial growth and cellulose degradation.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.11-18
• /
• 2008

Anatomical characteristics of volumetric composition, fiber length, vessel diameter, and crystalline properties of cellulose in kenaf (Hibiscus cannabinus L.) planted in the reclaimed land of Buan-si, Korea were examined to understand the growth characteristics using a light microscopy and an X-ray diffraction method. The samples of kenaf were taken from six positions (3 cm, 35 cm, 70 cm, 105 cm, 280 cm, and 320 cm) of each stem over the growth period (July, August, September, and October) after seeding in the mid-May. In the kenaf stem, phloem constituted 10 to 15 %, xylem 66 to 82%, and pith 7 to 19%. The ray, bast fiber, and remainder comprised 50%, 20%, and 30% of the phloem, respectively. The volume of vessel, ray, and fiber in the xylem was approximately 10, 15, and 75%, respectively. The proportion of cell wall was 30.92% at the base of stem and 46.40% at the top of stem, respectively. The average length of bast fiber and xylem fiber was about 2.8 mm and 0.9 mm, respectively. Radial and tangential diameters of vessel increased with the increase of growth period, while they decreased with increasing the stem height. Relative crystallinity ranged from 70 to 79% in phloem and from 50 to 56% in xylem. Cellulose crystallite width was about 3 nm both in the phloem and xylem. Thus, the volumetric composition and cell dimensions in the phloem and xylem appeared to be varied with the growth period and the stem height.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.553-560
• /
• 2020

In the existing research paper, we developed Mechanical Pressurizing Equipment(MPE) that can apply a certain amount of pressure and found out about improving the bonding strength of repair materials constructed in the repair section, and if pressurized, the bonding strength could be increased. In this study, the pressure of Mechanical Pressurizing Equipment(MPE) was changed to 0, 10, 30, 50, and 80 kPa, and the test was conducted to select effective pressure by measuring the flexural, compressive, and bonding strength of the specimens and deformation of the pressure plate at the age of 3 and 28th days. As a result of the test, 30 kPa was the most efficient pressure for the MPE. After producing the specimen with three types of repair materials with different main components, the bonding strength was measured according to dry and wet conditions, construction site (ceiling, wall and floor), and whether or not pressurized, on the 3rd, 7th, 14th, and 28th, indicating that the repair materials mixed with cellulose fiber was most effective for the MPE.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.4
• /
• pp.155-163
• /
• 2019

Mixture electrodes of a graphite having a good cycle performance and a silicon monoxide (SiO) having a high capacity are fabricated and their cycle performances are evaluated as negative electrodes for lithium-ion batteries. The electrode prepared by mixing the natural graphite and carbon-coated SiO in a mass ratio of 9:1 shows a reversible capacity of $480mAh\;g^{-1}$, 33% higher than that of graphite. However, the capacity deteriorates continuously upon cycling due to the volume change of silicon monoxide. In this study, the factors that can improve the cycle performance have been discussed through the change in the configurations of the electrode and the electrolyte. The electrode using the carboxymethyl cellulose (CMC) binder shows the best cycle performance compared to the conventional binders. The electrode sing the CMC and styrene-butadiene rubber (SBR) binder not only has almost the similar cycle characteristics with the electrode using the CMC binder but also has the better rate capability. When the fluoroethylene carbonate (FEC) is used as an electrolyte additive, the cycle life is improved. However, the electrolyte with 5 wt% of FEC is appropriate because the rate capability decreases when the content of FEC is increased to 10 wt%. In addition, when the mass loading of the electrode is lowered, the cycle performance is greatly improved. Also, enhanced cycle performance is achieved using the roughened Cu current collector polished by abrasive paper.

• The Korean Journal of Mycology
• /
• v.1 no.2
• /
• pp.15-23
• /
• 1973

Mold producing cellulase were isolated from rotten woods, and identified as the three species: Aspergillus niger van Tieghem, Aspergillus schiemanni Thom and Trichoderma viride Pers. In this paper, culture conditions in the media and characteristics of these strains were investigated. Using these strains, we have conducted a research concerning the utilization of farm product waste materia's. 1. Optimum conditions for the cellulase formation were as follows. KM 10-1; pH 5.2-5.5, $35^{\circ}C$, incubation time 6 days. OL 11-1; pH 5.5, $30-35^{\circ}C$, incubation time 6 days. SH 9-2; pH 5.5, $30^{\circ}C$, incubatoin time 6 days. 2. Their cellulase activities in their optimum condition were as follows: KM 10-1; CMC-LP 78.5% CMC-SP 4.0 glucose mg/gm of the cultures/min. OL 11-1; CMC-LP 89.9%, CMC-SP 4.9 glucose mg/gm of the cultures/min. SH 9-2; CMC-I.P 77.4%, CMC-SP 3.9 glucose mg/gm of the cultures/min. 3. Hydrolysis of animal feed containing a large quantity (23-30%) of cellulose by means of the crude enzyme in the selected strains resolved 30% of the cellulose contained in the animal feed.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.511-514
• /
• 2015

A pretreatment process of cellulose decomposition to a monosaccharide plays an important role in the cellulosic ethanol production using the lignocellulosic biomass. In this study, a cellulosic ethanol was produced by using acidic hydrolysis and enzymatic saccharification process from the lignocellulosic biomass such as rice straw, sawdust, copying paper and newspaper. Three different pretreatment processes were compared; the acidic hydrolysis ($100^{\circ}C$, 1 h) using 10~30 wt% of sulfuric acid, the enzymatic saccharification (30 min) using celluclast ($55^{\circ}C$, pH = 5.0), AMG ($60^{\circ}C$, pH = 4.5), and spirizyme ($60^{\circ}C$, pH = 4.2) and also the hybrid process (enzymatic saccharification after acidic hydrolysis). The yield of cellulosic ethanol conversion with those pretreatment processes were obtained as the following order : hybrid process > acidic hydrolysis > enzymatic saccharification. The optimum fermentation time was proven to be two days in this work. The yield of cellulosic ethanol conversion using celluclast after the acidic hydrolysis with 20 wt% sulfuric acid were obtained as the following order : sawdust > rice straw > copying paper > newspaper when conducting enzymatic saccharification.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.21-21
• /
• 2001

자원재활용과 원가절감를 위해 고지재활용율이 크게 상승하고 있으며, 이와 아울러 고 지원료로부터 고품질의 제품을 생산할 수 있는 기술에 대한 관심이 증대되고 있는 실 정이다. 저급 고지로부터 고품질의 탈묵펄프를 얻기 위해서는 고지재활용공정의 핵심 공정인 부유부상 공정의 효율화가 가장 중요하다고 믿어진다. 이를 위해서는 부유부상 공정에 가장 큰 영향을 미치는 고형입자의 표면 화학적 특성에 따른 공정의 분리효율 평가와 이에 근거한 공정해석과 개선이 요청된다. 이러한 부유부상 공정을 표면화학적 측면에서 구명하기 위해 마이크로 크리스탈린 셀룰로오스(Microcrystalline cellulose: M MCC)를 모댈 물질로 사용하여 표면화학적 특성은 다르나 입자의 크기와 형태는 동일 한 시료를 준비하였다. 친수성의 표면 특성을 나타내는 MCC의 표면 특성을 바꾸기 위 하여 AKD(alkyl ketene dimer)로 처리비율을 달리하여 솔벤트 사이징 처리를 실시하 였다. 이렇게 준비된 MCC의 표면화학적 특성을 IGC를 이용하여 평가하였다 .. IGC는 G GC를 응용한 표면분석 기술로 고체의 물리화학적 특성과 흡착성을 분석하기 위해서 사용되며 이로부터 흡착제의 표면특성을 평가할 수 있다. 본 실험에서는 AKD로 소수화 정도가 다르도록 소수화시킨 MCC 시료를 이용하여 I IGC 칼럼을 준비하고 n-알칸과 몇가지 극성 용매률 이용하여 이들의 칼럼 내 체류시 간을 측정함으로써 흡착특성을 평가하고 이로부터 흡착현상을 열역학적으로 분석하였다. IGC 분석 시에는 칼럼의 온도를 $30^{\circ}C$, $35^{\circ}C$, $40^{\circ}C$의 3수준으로 변화시켰다. 측정결 과로부터 MCC 표면의 흡착자유에너지와 엔탈피, 엔트로피의 변화량을 평가하였으며, 또한 MCC 표면의 극성에너지와 산염기적 성질을 평가하였다. 실험결과 MCC의 소수화도에 따른 열역학적 흡착현상의 차이가 명백하였다. 이는 소 수화 수준에 따라 소수성 및 친수성 물질의 흡착성이 변화된다는 것을 보여준다. 따라서 탈묵 시 진행되는 기포에의 부착현상을 평가할 수 있는 기초자료로 활용될 수 있다 고 사료되었다.

• Textile Coloration and Finishing
• /
• v.29 no.1
• /
• pp.45-54
• /
• 2017

Ultraviolet radiation have much influenced with a deep wrinkles, roughness, laxity of skin damage and pigmentation through oxidative stress and oxidative photo-damage. This study investigates the functional properties of hydrogel facial mask sheets made from agar, Styela clava tunics and Broussonetia papyrifera tunics. The skin of S. clava is covered with a hard cellulose containing glycoprotein, glycosaminoglycan and chondroitin sulfate. B. papyrifera is better known as Paper mulberry. It contains kazinol which serves as a tyrosinase inhibitor and skin whitening agent. The tensile strength of facial mask sheet was measured by universal testing machine, and the water absorption and moisture permeability of facial mask sheet were measured by dryer. Additionally, the DPPH assay and MTT assay were conducted for anti-oxidative activity and cytotoxicity of facial mask sheet. The whitening effect of the facial mask sheet was measured by tyrosinase inhibitor assay. These tests showed that the three ingredients are suitable cosmetic materials. The results reveal that they produce a high quality hydrogel facial mask sheet when the membrane contains 1%(W/V) of agar, 0.1%(W/V) of B. papyrifera tunics and 0.05%(W/V) of S. clava tunics.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.127-133
• /
• 2016

This study is performed that furniture and interior materials of MDF's (Medium Density Fiberboard) biodegradation properties, and the goal of this study is investigation of possibility of waste-MDF's composting after landfilling. To investigate biodegradation, this study was performed according to KS M ISO 14855-1, and there were two different soil conditions including a compost condition and an activated vermiculite condition as artificial soil. This experiment was tested for 40 days. The measurement of carbon-dioxide generation was processed every 24 hour in 1-2 week, and every 48 hour after 3 week. In the same days, MDF showed 24.4% of biodegradation in compost condition, and 6.2% in activated vermiculite. Also, the reference material of TLC (thin-layer chromatography) grade cellulose showed 26.4%, 11.4% in compost and activated vermiculite respectively. The dilution plate method was performed for biological analysis in the study. This experiment was used for investigation of inoculum's (Bacillus licheniformis) activity. As the result of bioassay, compost has more other germs include inoculum than activated vermiculite in the first week. Especially in the 2nd week, the reference material under the compost condition showed the most germ's activity, and also the biodegradation was the highest. Consequentially, compost condition was able to reduce a performing period of biodegradation testing than activated vermiculite. However, activated vermiculite could be stabilizing errors between repetition.