• Polymer Science and Technology
• /
• v.8 no.5
• /
• pp.608-621
• /
• 1997

• 전기의세계
• /
• v.20 no.2
• /
• pp.27-31
• /
• 1971

Using insulating paper (cellophan), we measured the influences of moisture abosrbed for electrical properties i.e. V.I curves which result in deteriorating due to the moisture alsorbed is related to electrical properties Considerally due to the electrolytic effects of moisture involved cellulose Gel structure, we obtained also an evaluation method of deterioration rate Caused by the moisture absorbed in insulating papers.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.952-954
• /
• 1998

This paper presents an artificial neural network approach to diagnose and detect faults in oil-filled power transformers based on dissolved gas analysis. The proposed algorithm is used to detect faults with or without cellulose involved. Several neural network topologies have been considered. Good diagnosis accuracy is obtained with the proposed approach.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.943-946
• /
• 2007

In-plane piezoelectric charge constant of Electro-Active paper (EAPap) was investigated based on direct and converse piezoelectric effects. EAPap samples were made with cellulose film with very thin gold electrode coated on both sides of the film. To characterize direct piezoelectricity of EAPap, induced charge was measured when mechanical stress was applied to EAPap. In-plane piezoelectric charge constant was extracted from the relation between induced charge and applied in-plane normal stress. To investigate converse piezoelectricity, induced in-plane strain was measured when electric field was applied to EAPap. Piezoelectric charge constant was also extracted from the relation of induced in-plane strain and applied electric field. Piezoelectric charge constants obtained from direct and converse piezoelectricity are 31 pC/N and 178 x 10-12m/V for 45 degree sample, respectively. Measured piezoelectric charge constants of EAPap provide promising potential as a piezoelectric material.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.30-36
• /
• 2004

Waste papers(MOW and ONP) were deinked with alkaline cellulolytic enzyme from Coprinus cinereus 2249. The effectiveness of alkaline enzyme on sticky contaminant removal and bleaching of recycling pulp was investigated. The conclusions obtained from the results are as follows. The brightness of deinked pulps MOW and ONP was most high in 0.4IU enzyme treatment. \circled2 The removal effect of sticky contaminant was enhanced with alkaline cellulolytic enzyme treatment. Bleaching with sodium hydrosulfite was most effective in one and two stage bleaching after enzyme treatment of mixed wastepaper of MOW and colored paper. \circled4 The brightness of alkaline enzyme deinked ONP was increased 20％ with $H_2O$$_2$ bleaching.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1988.11a
• /
• pp.49-56
• /
• 1988

자동차의 동력전달 수단으로 사용되는 클러치는 그 기능에 따라 수동식과 자동식으로 구분된다. 전자의 경우 transmission과 engine의 동력을 dry contact mechanism으로 단속 제어하는 반면 후자는 hadraulic torque drive와 engine의 동력을 transmission box내의 기어유에 의한 wet contact mechanism으로 단속 제어한다. 자동식 클러치에 사용되는 paper facing은 cellulose fiber를 기본으로 하여 열경화성 수지 및 무기충진제등을 함유하고 있으나, 특히 무기충진제의 종류 및 첨가량이 paper facing의 마찰특성에 크게 영향을 미친다. 본 연구는 목재펄프(wood pulp), 린터펄프(linter pulp)등의 펄프를 주체로 하고 열경화성 수지와 무기충지제등을 첨가한 마찰재를 제조하여 무기충진제들의 마찰특성에 미치는 영향을 조사함으로써 paper facing의 기초 자료를 얻는데 그 목적이 있다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.44-49
• /
• 2014

The mushroom cultured waste(MCW) from cork oak was evaluated as the raw material for bioethanol production. For enzymatic hydrolysis, cellulase cocktails (Celluclast 1.5L and Novozym 188) was used for polysaccharides to monosaccharides conversion. Compared with sound cork oak woodmeal, woodmeal from MCW showed higher cellulose to glucose conversion. To improve polysaccharides to monosaccharides conversion, pretreatment by sodium hydroxide was applied. Even though more xylan and lignin were removed in woodmeal of MCW than that of cork oak, concentration of glucose was higher from sodium hydroxide treated cork oak woodmeal (51.3 g/L) than treated MCW woodmeal (41.6 g/L).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.3
• /
• pp.37-43
• /
• 2014

Kinetics of holocellulose hydrolysis in concentrated sulfuric acid was analyzed using $^1H$-NMR spectroscopy with different reaction time, temperature and acid concentration in secondary hydrolysis. In this work, reaction condition of secondary hydrolysis was similar to concentrated sulfuric acid process with electrodialysis or simulated moving bed chromatography process for sulfuric acid recycling. By $^1H$-NMR spectroscopy, acid hydrolyzates from higher secondary acid hydrolysis (25-35% acid concentration) was successfully analyzed without any difficulties in neutralization or adsorption of acid hydrolyzate to solid salt. Higher acid concentration, higher temperature and longer reaction time led to more cellulose for glucose conversion but accompanied with glucose to galactose isomerization, glucose to unknown compounds and degradation of glucose to organic acid via furans.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.1-7
• /
• 2014

Dissolving part of xylan and lignin in lignocellulosic biomass by base can be used as pretreatment technique. Cork oak was pretreated with sodium hydroxide solution and the pretreatment effects were evaluated with two critical factors - NaOH concentration and pretreatment temperature. Some of xylan and lignin were removed by base pretreatment. At $90^{\circ}C$ and 13% NaOH pretreatment, 22.0% of lignin and 78.8% of xylan removed by base treatment. Enzymatic hydrolysis of cork oak which was pretreated at higher temperature or concentration was further improved. After pretreatment of cork oak with 13% NaOH at $90^{\circ}C$, the conversion rate of cellulose to fermentable sugars were reached up to 91.3%. At ethanol fermentation with enzymatic hydrolysate from different pretreatment conditions, all enzymatic saccharification liquids were well fermented by Saccharomyces cerevisiae.

• The Research Journal of the Costume Culture
• /
• v.19 no.4
• /
• pp.851-862
• /
• 2011

The purposes of this study were to identify the material manipulation techniques for paper garments and their characteristics. Reference books or articles were reviewed and catalogues from paper garments exhibition or show, brochures from Paper Museums, and internet sites of paper fashion designers were selected for analysis. Paper has much similarity with natural cellulose textiles in appearances and contents but has much distinct differences in their physical characteristics such as strength, durability, washability, and resilience, and could be treated as one category of textiles. Paper garments were developed with practicality and functionality for the poor and Buddist monks at first but progressed into more aesthetics later for the rich. Paper garments could be divided into 4 categories of garments made of paper, paper thread fabric or knit, modified paper with wanter, and beaten bark of mulburry bush. Paper can be manipulated by coloring & cutting, bonding, or quilting and bonding or quilting can reenforce the strength of paper but cannot increase flexibility. Paper manipulated by weaving or knitting has very similar physical properties as cotton or linen and ideal for summer textiles. Paper can be manipulated with water to make a paper paste and bodice can be moulded with paper paste or Joomchied. Also we can express beautiful patterns on the surface of paper by washouting. Konnyaku paste or lacquer can be used to make paper garments to be waterproof.