• Journal of Microbiology
• /
• 제34권2호
• /
• pp.192-197
• /
• 1996

L-Xylosone was detected as its quinoxaline derivative in the degradation solution of dehydro-L-ascorbic acid. The production rate of L-xylosone was much faster in aerated phosphate-cirate buffer (pH 5. 6) than in pure water. L-Xylosone and dehydro-L-ascorbic acid were identified in the crude extracts of Saccharomyces cerevisiae. The concentration of L-xylosone in the crude cell extracts was calculated to be about 0.2 nmol $(mg protein)^{-1}$. When L-xylosone was added to asynchronous culture of S. cerevisiae, it inhibited primarily the synthesis of protein and RNA. Examination of the effect of L- xylosone on synchronous culture of the yeast indicated that L-xylosone inhibited the initiation of DNA replication and that the cells were arrested at $G_1$, stage of cell division cycle. These results suggested a possibility that L-xylosone can act as an inhibitor of cell growth.

• 공업화학
• /
• 제23권3호
• /
• pp.297-301
• /
• 2012

미생물연료전지는 미생물의 신진대사 활동을 통해 자발적으로 바이오매스를 전기로 전환시키는 바이오 전기화학 시스템이다. 본 연구에서는 미생물 접종원으로 활성슬러지를 사용하였으며, 미생물연료전지의 전기생산을 위한 기질로서 유가공 폐수의 적용 가능성을 검토하였다. 전력발생 장치로서 미생물연료전지의 성능을 파악하고자 전지전위, 전력밀도, 순환전압전류 분석 및 지속가능 전력생산에 관한 특성을 유가공 폐수를 적용하여 평가하였다. Chemical Oxygen Demand (COD) 2650 mg/L의 유가공 폐수를 이용한 미생물연료전지 시스템에서 COD가 88% 제거되었으며, 최대 전력밀도는 $40\;mW/m^2$에 도달하였다. 본 연구 결과로부터 유가공 폐수를 효과적으로 처리하는 동시에 전기를 생산하기 위한 미생물연료전지 기술의 적용 가능성을 확인하였다.

• Journal of Animal Science and Technology
• /
• 제53권3호
• /
• pp.203-209
• /
• 2011

Lysophosphatidic acid (LPA) is a small lipid molecule that plays an important role through LPA receptors (LPARs) in reproductive processes. Our previous study has shown maximal expression of LPAR3 in the uterine endometrium on day (D) 12 of pregnancy in pigs, the period when conceptus secretes various molecules such as estrogen and interleukin-$1{\beta}$ (IL1B) and initiates implantation. We determined that endometrial expression of LPAR3 was increased by conceptus estrogen in the previous study, but the effect of IL1B on LPAR3 expression has not been determined. Thus, in this study we examined whether LPAR3 expression was also affected by IL1B. Endometrial explant cultures from D12 of the estrous cycle showed that levels of endometrial LPAR3 expression did not changed in response to IL1B. We also investigated LPAR3 expression in the uterine endometrium on D12 and D30 of pregnancy from gilts with conceptuses derived from somatic cell nuclear transfer (SCNT). The expression of LPAR3 mRNA was lower in endometria from gilts with conceptuses resulting from SCNT compared with those from gilts with embryos resulting from natural mating on D12 of pregnancy, but it was not different between them on D30 of pregnancy. Our results indicate that estrogen of conceptus origin is responsible for induction of LPAR3 expression during the peri-implantation period and appropriate LPA signaling is impaired in the uterine endometrium with SCNT-derived conceptuses during the implantation period in pigs.

• 대기
• /
• 제24권4호
• /
• pp.457-470
• /
• 2014

Thermodynamic conditions related with localized torrential rainfall in the middle west region of Korean peninsula are examined using radar rain rate and radiosonde observational data. Localized torrential rainfall events in this study are defined by three criteria base on 1) any one of Automated Synoptic Observing System (ASOS) hourly rainfall exceeds $30mmhr^{-1}$ around Osan, 2) the rain (> $1mmhr^{-1}$) area estimated from radar reflectivity is less than $20,000km^2$, and 3) the rain (> $10mmhr^{-1}$) cell is detected clearly and duration is short than 24 hr. As a result, 13 cases were selected during the summer season of 10 years (2004-13). It was found that the duration, the maximum rain area, and the maximum volumetric rain rate of convective cells (> $30mmhr^{-1}$) are less than 9hr, smaller than $1,000km^2$, and $15,000{\sim}60,000m^3s^{-1}$ in these cases. And a majority of cases shows the following thermodynamic characteristics: 1) Convective Available Potential Energy (CAPE) > $800Jkg^{-1}$, 2) Convective Inhibition (CIN) < $40Jkg^{-1}$, 3) Total Precipitable Water (TPW) ${\approx}$ 55 mm, and 4) Storm Relative Helicity (SRH) < $120m^2s^{-2}$. These cases mostly occurred in the afternoon. These thermodynamic conditions indicated that these cases were caused by strong atmospheric instability, lifting to overcome CIN, and sufficient moisture. The localized torrential rainfall occurred with deep moisture convection result from the instability caused by convective heating.

• 한국가축번식학회지
• /
• 제26권4호
• /
• pp.361-368
• /
• 2002

The onset of pronucleus formation and DNA synthesis in porcine oocytes following the injection of porcine or murine sperm was determined in order to obtain insights into species-specific paternal factors that contribute to fertilization. After 44h in vitro maturation, spermatozoa was injected into the cytoplasm of oocytes. After injection, all oocytes were transferred to NCSU23 medium and cultured at 39'E under 5% CO2 in air. Similar frequencies of oocytes with female pronuclei were observed after injection with porcine sperm or with murine sperm. In contrast, male pronuclei formed 8 to 9 h following the injection of porcine sperm, and 6 to 8 h following the injection of murine sperm. After pronucleus formation maternally derived microtubules were assembled and appeared to move both male and female pronuclei to the oocyte center. A few porcine oocytes entered metaphase 22 h after the injection of murine sperm, but normal cell division was not observed. The mean time of onset of S-phase in male pronuclei was 9.7 h following porcine sperm injection and 7.4 h following mouse sperm injection. These results suggested that DNA synthesis was delayed in both pronuclei until the sperm chromatin fully decondensed, and the sperm nuclear decondensing activity and microtubule nucleation abilities of the male centrosome are cell cycle dependent.

• 한국재료학회지
• /
• 제29권5호
• /
• pp.322-327
• /
• 2019

Hole carrier selective MoOx film is obtained by atomic layer deposition(ALD) using molybdenum hexacarbonyl[$Mo(CO)_6$] as precursor and ozone($O_3$) oxidant. The growth rate is about 0.036 nm/cycle at 200 g/Nm of ozone concentration and the thickness of interfacial oxide is about 2 nm. The measured band gap and work function of the MoOx film grown by ALD are 3.25 eV and 8 eV, respectively. X-ray photoelectron spectroscopy(XPS) result shows that the $Mo^{6+}$ state is dominant in the MoOx thin film. In the case of ALD-MoOx grown on Si wafer, the ozone concentration does not affect the passivation performance in the as-deposited state. But, the implied open-circuit voltage increases from $576^{\circ}C$ to $620^{\circ}C$ at 250 g/Nm after post-deposition annealing at $350^{\circ}C$ in a forming gas ambient. Instead of using a p-type amorphous silicon layer, high work function MoOx films as hole selective contact are applied for heterojunction silicon solar cells and the best efficiency yet recorded (21 %) is obtained.

• 대한금속재료학회지
• /
• 제56권12호
• /
• pp.878-884
• /
• 2018

In the present work, we selected a polymer, polyvinylidene fluoride (PVDF), as an additive to improve the hydrogenation and dehydrogenation properties of Mg. 95 wt% Mg + 5 wt% PVDF (designated Mg-5PVDF) samples were prepared via milling in hydrogen atmosphere (reactive milling), and the hydrogenation and dehydrogenation characteristics of the prepared samples were compared with those of Mg milled in hydrogen atmosphere. The dehydrogenation of magnesium hydride formed in the as-prepared Mg-5PVDF during reactive milling began at 681 K. In the fourth cycle (n=4), the initial hydrogenation rate was 0.75 wt% H/min and the quantity of hydrogen absorbed for 60 min, $H_a$ (60 min), was 3.57 wt% H at 573 K and in 12 bar $H_2$. It is believed that after reactive milling the PVDF became amorphous. The milling of Mg with the PVDF in hydrogen atmosphere is believed to have produced defects and cracks. The fabrication of defects is thought to ease nucleation. The fabrication of cracks is thought to expose fresh surfaces, resulting in an increase in the reactivity of the particles with hydrogen and a decrease in the diffusion distances of hydrogen atoms. As far as we know, this investigation is the first in which a polymer PVDF was added to Mg by reactive milling to improve the hydrogenation and dehydrogenation characteristics of Mg.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.609-616
• /
• 2019

The optimum powder to ball ratio was examined, which is one of the important conditions in reactive mechanical grinding processing. Yttria (Y2O3)-stabilized zirconia (ZrO2) (YSZ), Ni, and graphene were chosen as additives to enhance the hydriding and dehydriding rates of Mg. Samples with a composition of 92.5 wt% Mg + 2.5 wt% YSZ + 2.5 wt% Ni + 2.5 wt% graphene (designated as Mg-2.5YSZ-2.5Ni-2.5graphene) were prepared by grinding in hydrogen atmosphere. Mg-2.5YSZ-2.5Ni-2.5graphene had a high effective hydrogen-storage capacity of almost 7 wt% (6.85 wt%) at 623 K in 12 bar H2 at the second cycle (n = 2). Mg-2.5YSZ-2.5Ni-2.5graphene contained Mg2Ni phase after hydriding-dehydriding cycling. Mg-2.5YSZ-2.5Ni-2.5graphene had a larger quantity of hydrogen absorbed for 60 min, Ha (60 min), than Mg-2.5Ni-2.5graphene and Mg-2.5graphene. The addition of YSZ also increased the initial dehydriding rate and the quantity of hydrogen released for 60 min, Hd (60 min), compared with those of Mg-2.5Ni-2.5graphene. Y2O3-stabilized ZrO2, Ni, and graphene-added Mg had a higher initial hydriding rate and a larger Ha (60 min) than Fe2O3, MnO, or Ni and Fe2O3-added Mg at n = 1.

• 생명과학회지
• /
• 제28권9호
• /
• pp.1016-1021
• /
• 2018

C. difficile 톡신A에 의한 대장상피세포 자살과정은 위막성대장염(Pseudomembranous colitis)의 주요 원인으로 고려되고 있다. 톡신A는 활성산소 를 증가시켜 세포자살 신호를 유도한다. 또한 톡신A는 미세섬유나 미세소관과 같은 세포골격계 형성을 저해함으로써 자살을 유도한다고 알려져 있다. 하지만 톡신A가 야기하는 소화기 상피세포 자살경로는 아직 불분명하다. 본 연구에서는 소화관 상피세포의 성장과 분화 그리고 기능에 중요하다고 알려져 온 Wnt 신호경로에 대한 톡신A의 영향을 확인해보았다. 이를 위해 비암화-인간대장세포주(NCM460)에 톡신A를 처치하고 Wnt 신호 분자들의 변화를 추적하였다. 또한 톡신A를 주입한 생쥐의 회장 상피세포 속 Wnt 신호경로 변화도 평가하였다. 인간 대장상피세포에서 톡신A는 Wnt 경로의 핵심 신호분자인 ${\beta}$-catenin 단백질의 양을 빠르게 감소시켰다. 이 현상은 생쥐 회장 상피세포에서도 동일하게 확인되었다. 연구자 등은 톡신A가 $GSK3{\beta}$ 활성형 인산화(Thr390)를 증가시킴도 확인하였다. 이는 톡신A가 $GSK3{\beta}$의 활성을 높여서 ${\beta}$-catenin의 인산화시키고 이를 통해 단백질 분해 과정이 촉진되었음을 보여준다. 이 결과들을 종합하면, 톡신A에 의한 소화관 상피세포 자살과정이 상피세포의 성장과 자살을 조절하는 Wnt 신호경로 차단과 밀접하게 연관되어 있음을 보여준다.

• 생명과학회지
• /
• 제27권2호
• /
• pp.164-171
• /
• 2017

본 연구에서는 인간 자궁경부암세포주에서 S-allylcysteine (SAC)이 세포자멸경로에 중요한 역할을 담당하는 initiator caspase의 하나인 caspase-9와 effector caspase에 속하는 caspase-3 및 caspase-7 그리고 DNA 복구에 관여하는 poly ADP-ribose polymerase (PARP)의 발현조절에 미치는 영향과, SAC에 의한 이러한 세포자멸 및 DNA 복구 관련 단백질의 발현변화가 세포증식억제를 통한 기능적 작용을 유발하는지를 조사하였다. 단백질 발현분석 결과, 특히 50 mM의 SAC로 48시간 동안 처리하였을 경우, procaspase-3, -7, -9 및 PARP의 발현은 각각 94%, 38%, 95% 및 64% 감소되었으며, 이와 반대로 caspase-3, -7, -9 및 cleaved-PARP의 발현은 현저히 증가되었다. 또한 cell proliferation assay 결과, 20 mM 이상의 SAC 처리는 6, 12, 24 및 48시간에서 농도 및 시간 의존적인 세포증식 억제효과를 나타내었다. 이러한 결과는 SAC 처리가 자궁경부암세포의 증식을 억제하며, 이에 대한 가능한 분자적 작용기전들 중의 하나로 세포자멸과정 중 initiator caspase의 하나인 caspase-9의 활성을 유도하고 이에 따른 effector caspase인 caspase-3과 caspase-7의 활성을 촉진시킬 뿐만 아니라 DNA 복구에 관여하는 PARP의 불활성화를 초래함으로써 세포자멸 유도에 관여하는 것으로 사료된다.