• 한국주조공학회지
• /
• 제11권5호
• /
• pp.398-405
• /
• 1991

Al-Li alloy has a high strength with low density. Practically this alloy should use by the material which made from the rapid solidification. Therefore we examine the solidification structures of alloy with cooling rate. According to cooling rate increased, grain size and secondary dendrite arm spacing were smaller. Also grain size was further smaller by Zr added. To obtain more fine solidification structure, rapid solidification by single roll melt spinning was performed. According to higher wheel speed, cooling rate increased and cell size was smaller. Because of locally different cooling rate, different cell size was obtained in same specimen. More than cooling rate $10^6^{\circ}C$ /sec, zone A(insensible zone to corrosion)was obtained.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.387-392
• /
• 2014

In this paper, a size-reduced Wilkinson balun with wide harmonic-suppressed band is presented. An accurate analysis of the parallel coupled line with an open stub (PCL-OS) is carried out. The PCL-OS structure shows excellent low pass filter and harmonic-suppression characteristics, which is useful for designing a low pass filter unit cell (LUC) with a reduced size. The designed Wilkinson balun at a 2.45 GHz center frequency not only shows an excellent harmonic suppression including the 5th harmonics up to 14 GHz over 15 dB, but it also has an area reduced to 48% of the conventional one.

• 한국전기전자재료학회논문지
• /
• 제11권5호
• /
• pp.384-393
• /
• 1998

A mixed powder of electrolyte and matrix support materials with a proper proportion was used for the fabrication of an electrolyte matrix sheet. The purpose of this study is to reduce the large change in MCFC cell thickness occurring in the initial start-up period when separate sheets of electrolyte and support are used. A focus was put on how small the carbonate particles could be made. The particle size of the carbonate powder was controlled by ball milling and the distribution was measured using a particle size analyser. The thickness change was reduced to 20% by this approach, which could be compared to 27% observed in a conventional cell. The thickness changes of electrolyte matrix have linear relation sizes of carbonate powders.

• Structural Engineering and Mechanics
• /
• 제77권6호
• /
• pp.779-795
• /
• 2021

In the recent decades, various optimization algorithms have been considered for the optimization of structures. In this research, a new enhanced algorithm is used for the size and topology optimization of truss structures. This algorithm, which is obtained from the combination of Crow Search Algorithm (CSA) and the Cellular Automata (CA) method, is called CA-CSA method. In the first iteration of the CA-CSA method, some of the best designs of the crow's memory are first selected and then located in the cells of CA. Then, a random cell is selected from CA, and the best design is chosen from the selected cell and its neighborhood; it is considered as a "local superior design" (LSD). In the optimization process, the LSD design is used to modify the CSA method. Numerical examples show that the CA-CSA method is more effective than CSA in the size and topology optimization of the truss structures.

• 한국방사선학회논문지
• /
• 제16권7호
• /
• pp.1007-1014
• /
• 2022

표적 방사성핵종 치료(targeted radionuclide therapy, TRT)는 방사성의약품을 사용하여 종양세포를 치료하는 방법이다. 인체의 조직을 구성하는 세포와 핵은 구형과 타원형으로 구성되어 있지만, 암세포의 경우 다양한 형태의 세포 형태로 이루어져 있다. 이에 본 연구는 몬테카를로 방법을 통해 표적 방사성핵종 치료 시 사용되는 베타선 방출 핵종을 대상으로 단일 세포 내 세포핵의 크기 변화에 따른 세포 구성 영역별 흡수선량을 분석하였다. 세포는 5 ㎛, 10 ㎛ 두 가지의 크기의 구 형태로 선정하였으며, 세포의 내부 구성은 세포핵, 세포질, 세포 표면으로 구분하였으며, 세포핵의 크기 증가에 따른 흡수선량을 평가하였다. 그 결과, 표적 방사성핵종 중 ¹⁷⁷Lu이 세포 모든 구획에서 가장 높은 선량을 나타냈으며, 세포 내 핵의 비중이 증가함에 따라 세포 표면의 흡수선량은 증가되었으나, 세포질과 세포핵의 흡수선량은 감소하는 경향을 보였다. 따라서 표적 방사성핵종 치료 시 암세포의 크기를 고려한 방사성핵종의 선택과 적절한 방사능량 결정이 중요할 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.61-62
• /
• 2008

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.53-56
• /
• 2002

Samsung's newly developed high luminance efficiency 42" VGA plasma display panel is introduced. A new discharge cell structure, SDR (Segmented electrode in Delta color arrayed Rectangular subpixel) has been applied to a full size panel for the first time. In this paper, we describe how this new discharge cell structure for high efficiency is integrated to an energy saving plasma display with better picture quality.

• 한국농공학회지
• /
• 제44권6호
• /
• pp.61-70
• /
• 2002

This study was performed to analyze the river fractal characteristics using GIS (Geographic Information System). In this study, topographical factors in river basin were grid-analyzed for each cell size and scale using GIS and regression formula was derived by analyzing correlation among topographical factors and cell size which were calculated here. And, a new rainfall-runoff model which is considering the calculated fractal dimension was developed to apply fur a river basin.

• 대한산업공학회지
• /
• 제29권2호
• /
• pp.135-144
• /
• 2003

Traffic performance in a microcellular system is much more affected by cell dwell time and channel holding time in each cell. Cell dwell time of a call is characterized by its mobility pattern, i.e., stochastic changes of moving speed and direction. Cell dwell time provides important information for other analyses on traffic performance such as channel holding time, handover rate, and the average number of handovers per call. In the next generation mobile communication system, the cell size is expected to be much smaller than that of current one to accommodate the increase of user demand and to achieve high bandwidth utilization. As the cell size gets small, traffic performance is much more affected by variable mobility of users, especially by that of pedestrians. In previous work, analytical models are based on simple probability models. They provide sufficient accuracy in a simple second-generation cellular system. However, the role of them is becoming invalid in a picocellular environment where there are rapid change of network traffic conditions and highly random mobility of pedestrians. Unlike in previous work, we propose an improved probability model evolved from so-called Random walk model in order to mathematically formulate variable mobility of pedestrians and analyze the traffic performance. With our model, we can figure out variable characteristics of pedestrian mobility with stochastic correlation. The above-mentioned traffic performance measures are analyzed using our model.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.557-560
• /
• 2008

The main goal of this work is to fabricate light emitting diode (LED) module and apply it to mobile handset. We first fabricated the blue-color LED based on the AlInGaN cell structure with size of $200\;{\mu}m\;{\times}\;200\;{\mu}m$. Also we proposed a new $1.0\;mm\;{\times}\;0.5\;mm$ (1005size) packaging procedure for the LED cell. Thus the overall dimension of our LED cell was as small as $1.0\;mm\;{\times}\;0.5\;mm\;{\times}\;0.4\;mm$ ($W\;{\times}\;L\;{\times}\;T$). As far as we knew it was the first time that this small LED cell dimension had been fabricated and operated.