• Steel and Composite Structures
• /
• v.18 no.4
• /
• pp.853-871
• /
• 2015

Up to now, Japan has more than 200 corrugated steel web composite beam bridges which are under construction and have been constructed, and China has more than 30 corrugated steel web composite beam bridges. The bridge type includes the simply supported beam, continuous beam, continuous rigid frame and cable stayed bridge etc. The section form has developed to the single box and multi-cell box girder from the original single box and single chamber. From the stress performance and cost saving, the span range of 50~150 m is the most competitive. At present, the design mostly adopts the computational analytical method combining the spatial bar system model, plane beam grillage model and solid model. However, the spatial bar system model is short of the refinement analysis on the space effect, such as the shear lag effect, effective distribution width problem, and eccentric load factor problem etc. Due to the similarity of the plane beam grillage method in the equivalence principle, it cannot accurately reflect the shearing stress distribution and local stress of the top and bottom plates of the box type composite beam. The solid model is very difficult to combine with the overall calculation. Moreover, the spatial grid model can achieve the refinement analysis, with the integrity of the analysis and the comprehensiveness of the stress checking calculation, and can make up the deficiency of the analytical method currently. Through the example verification of the solid model and spatial grid model, it can be seen that the calculation results for the stress and the displacement of two models are almost consistent, indicating the applicability and precision of the spatial grid model.

• Steel and Composite Structures
• /
• v.24 no.5
• /
• pp.549-559
• /
• 2017

As few multi-tower single-box multi-cell cable-stayed bridges with corrugated steel webs have been built, analysis is mostly achieved by combining single-girder model, beam grillage model and solid model in support of the design. However, such analysis methods usually suffer from major limitations in terms of the engineering applications: single-girder model fails to account for spatial effect such as shear lag effect of the box girder and the relevant effective girder width and eccentric load coefficient; owing to the approximation in the principle equivalence, the plane grillage model cannot accurately capture shear stress distribution and local stress state in both top and bottom flange of composite box girder; and solid model is difficult to be practically combined with the overall calculation. The usual effective width method fails to provide a uniform and accurate "effective length" (and the codes fail to provide a unified design approach at those circumstance) considering different shear lag effects resulting from dead load, prestress and cable tension in the construction. Therefore, a novel spatial grid model has been developed to account for shear lag effect. The theoretical principle of the proposed spatial grid model has been elaborated along with the relevant illustrations of modeling parameters of composite box girder with corrugated steel webs. Then typical transverse and longitudinal shear lag coefficient distribution pattern at the side-span and mid-span key cross sections have been analyzed and summarized to provide reference for similar bridges. The effectiveness and accuracy of spatial grid analysis methods has been finally validated through a practical cable-stayed bridge.

• BMB Reports
• /
• v.39 no.6
• /
• pp.709-716
• /
• 2006

Mammalian polo-like kinase 1 (Plk1) acts at various stages in early and late mitosis. Plk1 localizes at the centrosome and maintains this position through mitosis. Thereafter Plk1 moves to the kinetochore and midbody region, important sites during chromosome separation and cytokinesis. The catalytic domain of Plk1 is in the N-terminus region, whereas the non-catalytic region in the C-terminus of Plk1 has a conserved motif, named the Polobox. This motif is critical for Plk localization. EGFP proteins fused with the N-terminus and C-terminus of Plk1 localize in the nucleus and centrosomes, respectively. The core sequences of the polo-box (50 amino acids) also localize in Plk1 target organelles. To screen for domain-specific target proteins of Plk1, we constructed an N-terminal domain and a tandem repeat polo-box motif, and used them as templates in a yeast two-hybrid screen. The HeLa cell cDNA library indicated several proteins including the centrosome/kinetochore components or regulators, to be characterized as positive clones. Through in vitro protein binding analyses, we confirmed an interaction between these proteins and Plk1. The data reported from this study indicate that the N- and C- termini of Plk1 may function through recruitment and/or activation of domain-specific target proteins in dividing cells. Additionally, tandem repeats of the conserved core motif of the polo-box are sufficient for targeting and may be useful as a centrosome/kinetochore-specific targeting peptide.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.12
• /
• pp.4865-4869
• /
• 2014

Objective: This study evaluated the expression level of high mobility group box-B1 (HMGB-1) and matrix metalloproteinase-9 (MMP-9) in non-small cell lung cancer (NSCLC) inmorder to reveal any relation with development and prognosis. Methods: NSCLC and normal tissues were selected from 30 patients at age of 30-73, and used for RT-PCR and Western blot analyses of HMGB-1. A total of 100 paraffin embedded NSCLC tissues were also isolated from patients through surgical resection, and used for detection of HMGB-1 by immunohistochemistry. In addition, 50 samples were also applied for MMP-9 detection, and 30 normal tissues were considered as controls. Correlation analysis of HMGB-1 and MMP-9 was carried out by Pearsons correlation coefficient. Results: The average expression level of HMGB-1 in NSCLC patients was significantly higher than in normal lung tissues. In addition, patients in III-IV period exhibit significantly higher positive rate of HMGB-1 when compared with I-II period cases. Furthermore, a positive correlation with HMGB-1 was found in the expression of MPP-9. Conclusion: HMGB-1 was highly expressed in NSCLC, which may become a prognostic and predictive marker for NSCLC. Besides, MPP-9 was positively correlated with HMGB-1.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.5
• /
• pp.384-389
• /
• 2009

KEPRI (Korea Electric Power Research Institute) has studied planar type solid oxide fuel cell (SOFC) stacks using anode-supported cells and kW class co-generation systems for residential power generation. In this work, a 1 kW SOFC system consisted of a hot box part, a cold BOP (balance of plant) part, and a hot water reservoir. The hot box part contained a SOFC stack made up of 48 cells, a fuel reformer, a catalytic combustor, and heat exchangers. Thermal management and insulation system were especially designed for self-sustainable operation in that system. A cold BOP part was composed of blowers, pumps, a water trap, and system control units. When the 1 kW SOFC stack was tested using hydrogen at $750^{\circ}C$, the stack power was about $1.2\;kW_e$ at 30 A and $1.6\;kW_e$ at 50 A. Turning off an electric furnace, the SOFC system was operated using hydrogen and city gas without any external heat source. Under self-sustainable operation conditions, the stack power was about $1.3\;kW_e$ with hydrogen and $1.2\;kW_e$ with city gas respectively. The system also recuperated heat of about $1.1\;kW_{th}$ by making hot water.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.37-43
• /
• 2011

In this paper, the optimized doping condition of crystalline silicon solar cells with $156{\times}156\;mm^2$ area was studied. To optimize the drive-in temperature in the doping process, the other conditions except variable drive-in temperature were fixed. These conditions were obtained in previous studies. After etching$7\;{\mu}m$ of the surface to form the pyramidal structure, the silicon nitride deposited by the PECVD had 75~80nm thickness and 2 to 2.1 for a refractive index. The silver and aluminium electrodes for front and back sheet, respectively, were formed by screen-printing method, followed by firing in 400-425-450-550-$850^{\circ}C$ five-zone temperature conditions to make the ohmic contact. Drive-in temperature was changed in range of $830^{\circ}C$ to $890^{\circ}C$to obtain the sheet resistance $30{\sim}70\;{\Omega}/{\box}$ with $10\;\Omega}/{\box}$ intervals. Solar cell made in $890^{\circ}C$ as the drive-in temperature revealed 17.1% conversion efficiency which is best in this study. This solar cells showed $34.4\;mA/cm^2$ of the current density, 627 mV of the open circuit voltage and 79.3% of the fill factor.

• Steel and Composite Structures
• /
• v.27 no.2
• /
• pp.135-147
• /
• 2018

Quasi-static three-point bending tests on sandwich beams with expanded metal sheets as core were conducted. Relationships between the force and displacement at the mid-span of the sandwich beams were obtained from the experiments. Numerical simulations were carried out using ABAQUS/EXPLCIT and the results were thoroughly compared with the experimental results. A parametric analysis was performed using a Box-Behnken design (BBD) for the design of experiments (DOE) techniques and a finite element modeling. Then, the influence of the core layers number, size of the cell and, thickness of the substrates was investigated. The results showed that the increase in the size of the expanded metal cell in a reasonable range was required to improve the performance of the structure under bending collapse. It was found that core layers number and size of the cell was key factors governing the quasi-static response of the sandwich beams with lattice cores.

• Animal cells and systems
• /
• v.2 no.2
• /
• pp.287-295
• /
• 1998

The Saccharomyces cerevisiae MGMT gene encodes a O6-methylguanine DNA methyltransferase that protects cells from mutation or death by DNA alkylating agents. Using an in vitro transcription system, we analyzed its promoter region to find regulatory elements for transcription initiation. DNase I footprinting and a transcription assay showed that a functional TATA box, 5'-TGATATAGCA-3', is located in the region spanning from -25 to -34. We also found one upstream repressing sequence (URS), -333 to -213, by promoter deletion and competition analysis. Gel mobility shift assays and Southwestern blot analysis using URS region indicate specific complex formations. These results indicate that several cis-acting and trans-acting elements might be involved in the transcriptional regulation of the S. cerevisiae MGMT gene.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.290-293
• /
• 2001

In this study, media optimization by statistically designed experiments stimulated an increase in cell growth of Bacillus sp. during batch cultivation. Plackett-Surman design method selected 3 components among 7 components of production medium. Box-Behnken design method calculated the optimum concentration of selected components by Plackett-Surman design. In the optimized medium, viable cell number increased 2 times. Addition of antifoam effected the cell growth depending on the type of antifoam Vegetable oil, are a carbon source and an antifoam. increased cell growth and controlled foaming

• Molecules and Cells
• /
• v.26 no.6
• /
• pp.621-624
• /
• 2008

We previously showed that Asb-4 and Asb-17 is uniquely expressed in developing male germ cells. A recent report showed that Asb-9 is specifically expressed in the kidney and testes; however, detailed expression patterns in developing germ cells have not been shown. Northern blot analysis in various tissues demonstrated that mAsb-9 was strongly expressed in the testes. Expression analysis by RT-PCR and Northern blot in developing mouse testes indicates that mAsb-9 is expressed from the fourth week after birth to adulthood, with the highest expression in round spermatids. Expression sites were further localized by in situ hybridization in the testes. Pachytene spermatocytes and spermatids expressed mAsb-9 but spermatogonia and generated spermatozoa did not. This study reveals that mAsb-9 could be a specific marker of active spermatogenesis and would be useful for studies of male germ cell development.