• 한국석유지질학회:학술대회논문집
• /
• 한국석유지질학회 2001년도 제8차 학술발표회 발표논문집
• /
• pp.63-65
• /
• 2001

The Chosen Supergroup (Cambro-Ordovician), mid-east Korea consists mainly of shallow marine carbonates and contains a variety of limestone conglomerates. These conglomerates largely comprise oligomictic, rounded lime-mudstone clasts of various size and shape (equant, oval, discoidal, tabular, and irregular) and dolomitic shale matrices. Most clasts are characterized by jigsaw-fit (mosaic), disorganized, or edgewise fabric and autoclastic lithology. Each conglomerate layer is commonly interbedded with limestone-dolomitic shale couplets and occasionally underlain by fractured limestone layer, capped by calcareous shale. According to composition, characteristic sedimentary structures, and fabric, limestone conglomerates in the Hwajol, Tumugol, Makkol, and Mungok formations of Chosen Supergroup can be classified into 4 types: (1) disorganized polymictic conglomerate (Cd), (2) horizontally stratified polymictic conglomerate (Cs), (3) mosaic conglomerate (Cm), and (4) disorganized/edgewise oligomictic conglomerate (Cd/e). These conglomerates are either depositional (Cd and Cs) or diagenetic (Cm and Cd/e) in origin. Depositional conglomerates are interpreted as storm deposits, tidal channel fills, or transgressive lag deposits. On the other hand, diagenetic conglomerates are not deposited by normal sedimentary processes, but formed by post-depositional diagenetic processes. Diagenetic conglomerates in the Chosen Supergroup are characterized by autoclastic and oligomictic lithology of lime-mudstone clasts, jigsaw-fit (mosaic) fabric, edgewise fabric, and a gradual transition from the underlying bed (Table 1). Autoclastic and oligomictic lithologies may be indicative of subsurface brecciation (fragmentation). Consolidation of lime-mudstone clasts pre-requisite for brecciation may result from dissolution and reprecipitation of CaCO3 by degradation of organic matter during burial. Jigsaw-fit fabric has been considered as evidence for in situ fragmentation. The edgewise fabric is most likely formed by expulsion of pore fluid during compaction. The lower boundary of intraformational conglomerates of depositional origin is commonly sharp and erosional. In contrast, diagenetic conglomerate layers mostly show a gradual transition from the underlying unit, which is indicative of progressive fragmentation upward (Fig. 1). The underlying fractured limestone layer also shows evidence for in situ fragmentation such as jigsaw-fit fabric and the same lithology as the overlying conglomerate layer (Fig, 1). Evidence from the conglomerate beds in the Chosen Supergroup suggests that diagenetic conglomerates are formed by in situ subsurface fragmentation of limestone layers and rounding of the fragments. In situ subsurface fragmentation may be primarily due to compaction, dewatering (upward-moving pore fluids), and dissolution, accompanying volume reduction. This process commonly occurs under the conditions of (1) alternating layers of carbonate-rich and carbonate-poor sediments and (B) early differential cementation of carbonate-rich layers. Differential cementation commonly takes place between alternating beds of carbonate-rich and clay-rich layers, because high carbonate content promotes cementation, whereas clay inhibits cementation. After deposition of alternating beds and differential cementation, with progressive burial, upward-moving pore fluid may raise pore-pressure in the upper part of limestone layers, due to commonly overlying impermeable shale layers (or beds). The high pore-pressure may reinforce propagation of fragmentation and cause upward-expulsion of pore fluid which probably produces edgewise fabric of tabular clasts. The fluidized flow then extends laterally, causing reorientation and further rounding of clasts. This process is analogous to that of autobrecciation, which can be analogously termed autoconglomeration. This is a fragmentation and rounding process whereby earlier semiconsolidated portions of limestone are incorporated into still fluid portions. The rounding may be due mainly to immiscibility and surface tension of lime-mud. The progressive rounding of the fragmented clasts probably results from grain attrition by fluidized flow. A synthetic study of limestone conglomerate beds in the Chosen Supergroup suggests that very small percent of the conglomerate layers are of depositional origin, whereas the rest, more than $80\%$, are of diagenetic origin. The common occurrence of diagenetic conglomerates warrants further study on limestone conglomerates elsewhere in the world.

• 분석과학
• /
• 제10권3호
• /
• pp.187-195
• /
• 1997

[16]-ane-$S_4$/탄소분말 함량비를 50%로 하여 nujol oil과 혼합하여 수식전극을 제조하였다. $5.0{\times}10^{-4}M$ $Ag^+$를 포함하는 pH 4.5인 아세트 완충용액에 수식전극을 담가 $Ag^+$를 전극 표면에 흡착시켰다. 이 때 흡착시간을 15분으로 하고 전해환원시키는 시간은 -0.3V vs S.C.E에서 2분으로 하였다. 또한 0.1M $HNO_3$ 용액으로 전극을 활성화시켰으며 한번 활성화한 전극은 10회까지 사용이 가능하였다. 최적 분석조건에서 미분펄스 전압전류법으로 $5.0{\times}10^{-7}{\sim}1.5{\times}10^{-6}M$ 사이의 농도 범위에서 정량해 보았을 때 직선성이 잘 성립하였으며, 검출한계는 $2.0{\times}10^{-7}M$이었다. 대부분의 금속들은 방해를 주지 않았으나, Cu(II)은 방해를 나타내었다.

• 한국대기환경학회지
• /
• 제21권1호
• /
• pp.119-129
• /
• 2005

The ambient TSP data measured at Seoul, Incheon. Taean, Daegu, Busan in Korea were used to explain the chemical composition and general features of Asian Dust (AD) observed in Korea. 9 episodes out of 19 were sampled from 2000 through May 2002, and measurements were conducted covering ionic and metal components with mass concentration. The results showed that daily averaged mass concentration (TSP) during the AD episodes was 458 $\mu\textrm{g}$/㎥, and ionic and metal concentrations were 27.93 $\mu\textrm{g}$/㎥ and 71.7 $\mu\textrm{g}$/㎥, respectively, accounting for 6.1 % and 15.5% of the total aerosol mass. TSP concentrations during episodes were varied from 120 to 1742 $\mu\textrm{g}$/㎥ according to the impact of Asian Dusts and had a tendency of showing higher values at sites in the west side of Korea, which can be explained by the effect of diffusion and deposition. In this study, ionic components like Ca (NO$_3$)$_2$, CaSO$_4$, NaNO$_3$, Na$_2$SO$_4$ were prominent types in secondary aerosol during AD periods and also indicated that V, Co as well as soil elements such as Ca, Fe, Mg, Mn, K correlated well with Al, while Cu, Cd, Pb, Zn didn't agree well with it. In addition, enrichment factors (EFs) for each metal component were obtained to provide simple information about source contribution of Asian Dust, and the results were compared with those from other AD studies. In this study, the results showed that aerosol properties in Korea during the Asian Dust were considerably different from those of general atmospheric condition and specially varied from case to case rather than site to site, which implies that there are certain variations in the soil of source region, pathways of air mass, and meteorological condition. For the enhanced study, those factors should be combined with the features of Asian Dust resolved from this study.

• 한국지구과학회지
• /
• 제25권6호
• /
• pp.428-442
• /
• 2004

본 연구는 낙동강 하류역 강하먼지의 조성 특성을 파악하기 위하여, 광구병형 Dust jar를 사용하여 2002년 6월부터 2003년 5월까지 1년간 낙동강 하류역의 5개 지점에서 시료를 채취하였다. 채취된 강하먼지에 함유된 불용성 성분(Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Si, V, Zn) 및 수용성 성분($Cl^-$, $NO_3^-$, $SO_4^{2-}$, $NH_4^+$, $Ca^{2+}$, $K^+$, $MG^{2+}$)들은 ICP/AES, AAS, IC 및 UV를 이용하여 정량하었다. 성분에 대한 지각농축계수를 지역별로 비교한 결과 인위적인 오염원인 Cd, Cu, Pb, Zn에서 10 이상의 높은 값을 보였다. 특히 Pb는 감전동, 원동, 신라대, 삼랑진 및 물금 지점 순으로 감소하는 것으로 조사되었다. 계절별 토양입자의 기여율은 겨울철에 16.3 %로서 가장 높았으며, 1년간 평균 기여율은 11.2%이었다. 계절별[$SO_4^{2-}/NO_3^-$] 당량비는 겨울철(5.12)이 가장 높았고, 가을철(3.30)이 가장 낮게 나타났다. 지역별로는 신라대, 감전동, 물금, 원동 및 삼랑진 순으로, 특히 도심에 인접한 지점의 경우가 높게 나타났으며, 평균 당량비는 4.28이었다. 총 강하먼지에 대한 수용성 이온성분의 총 침적량의 비율은 봄철(71.6%), 여름(61.2%), 가을(49.2%) 및 겨울철(48.6%)의 순으로 나타났으며, 평균은 57.6%이었다. 해염입자의 지역별 기여율 분포는 신라대(34.5%), 감전동(28.3%), 원동(17.3%), 삼랑진(17.2%) 및 물금(13.8%)의 순으로 나타났으며, 평균 기여율은 22.1%로 나타났다.

• 분석과학
• /
• 제31권6호
• /
• pp.247-258
• /
• 2018

본 연구는 대기오염 영향에 따라 주변의 오염도를 식물로 평가할 수 있는 여부를 고찰하기 위한 연구이다. 국내 자생하는 소나무의 1년생 솔잎가지를 대상 평가지표로 선택하였으며, 채취지점은 공단지역 주변의 공원 2곳, 상대적으로 오염원이 적다고 예상되는 도시지역 공원 2곳을 선정하였다. 대상 채취지점에서 소나무 10 그루 이상에서 지상 2 m 이상의 솔잎가지를 채취하였다. 채취한 솔잎가지 표면에 침착된 입자상 물질에 대한 분석항목은 입도분포, 전자현미경의 표면촬영, 먼지제거율, 납 등 중금속, 다환방향족탄화수소류(PAHs) 유기물질이었다. 초음파를 이용하여 탈착시킨 침착된 입자상 물질의 입도는 $0.4{\mu}m{\sim}200{\mu}m$ 범위로 나타났고, $10{\mu}m$ 이하의 입도는 20 % 수준이었다. 솔잎가지에 침착된 입자상 물질의 양은 평균 0.636 mg (0.450 mg~0.825 mg) 이었고, 강수장치에의한제거율은 평균 18.8 % (10.0 %~27.6 %)로 나타났다. 고주파전처리장치로 산전처리한 후 ICP/MS로 측정한 입자상 물질의 중금속 농도는 As 18.8~26.3 mg/kg, Be 0.08~0.13 mg/kg, Cd 0.06~0.08 mg/kg, Cr 4.91~17.8 mg/kg, Cu 5.26~405 mg/kg, Fe 1,930~2,670 mg/kg, Pb 3.03~28.1 mg/kg, Mn 26.9~42.8 mg/kg, Ni 2.66~10.4 mg/kg, Al 4,560~8,730 mg/kg, Ba 2,500~6,120 mg/kg, Rb 5.27~17.8 mg/kg, Sr 40.9~95.3 mg/kg, Zn 4,030~8,260 mg/kg 범위이었다. 침착된 입자상 물질의 세척액을 액-액 추출 정제한 후 GC/MS/MS로 분석한 PAHs의 농도는 ${\Sigma}PAH_{16}$은 1.179~12.396 mg/kg, ${\Sigma}PAH_7$은 0.147~0.741 mg/kg 범위이었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).