• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.99.1-99.1
• /
• 2012

The thin-film photovoltaic absorbers (CdTe and $Cu(In,Ga)Se_2$) can achieve solar conversion efficiencies of up to 20% and are now commercially available, but the presence of toxic (Cd,Se) and expensive elemental components (In, Te) is a real issue as the demand for photovoltaics rapidly increases. To overcome these limitations, there has been substantial interest in developing viable alternative materials, such as $Cu_2ZnSnS_4$ (CZTS) is an emerging solar absorber that is structurally similar to CIGS, but contains only earth abundant, non-toxic elements and has a near optimal direct band gap energy of 1.4 - 1.6 eV and a large absorption coefficient of ~104 $cm^{-1}$. The CZTS absorber layers are grown and investigated by various fabrication methods, such as thermal evaporation, e-beam evaporation with a post sulfurization, sputtering, non-vacuum sol-gel, pulsed laser, spray-pyrolysis method and electrodeposition technique. In the present work, we report an alternative aqueous chemical approach based on chemical bath deposition (CBD) method for large area deposition of CZTS thin films. Samples produced by our method were analyzed by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, absorbance and photoluminescence. The results show that this inexpensive and relatively benign process produces thin films of CZTS exhibiting uniform composition, kesterite crystal structure, and some factors like triethanolamine, ammonia, temperature which strongly affect on the morphology of CZTS film.

• Journal of the Korean Ceramic Society
• /
• v.12 no.1
• /
• pp.29-36
• /
• 1975

This study was conducted to research the formation, color development and application for colored glazes of the spinel solid solutions of the green pigment. On specimens prepared by calcining the oxide and basic carbonate mixture at 1250℃ for 1.5 hour, the x-ray analysis, measurement of reflectance and the test of their stabiality as a glaze pigment were carried out. The results are summarized as follows 1) Each sample is composed of single spinel and not of mixture of spinel. 2) Formation of continuous soild solution, except for a few instances, pertaining to Vegard's law was confirmed by means of the x-ray analysis. 3) The more difference between absorption and reflectance lies, the lighter colors are. When the absorption occurs at the high-reflectance, the excitation purity becomes low. On the contrary when the absorption takes place at the low-reflectance, the excitation purity becomes low. On the contrary when the absorption takes place at the low-reflectance, the excitation purity is higher. 4) Colors obtained in the CdO-MgO-Cr2O3-Al2O3 system, as the amounts of Al3+ increased, change from green through brown to pink, and the absorption peak shifts towards violet region. 5) An increase in Co2+ in the CoO-MgO-Cr2O3-Al2O3 system, changes the color from blue green to dark blue. The excitation purity is higher, and the absorption peak shifts toward regions. 6) Colors are green in the NiO-MgO-Cr2O3 and CdO-MgO-Cr2O3 systems in general, but in the ZnO-MgO-Cr2O3 system brillant hue is not obtained. 70 According to the results of the colored glaze test, the spinels turn outto be stable as brilliant glaze pigment in the calcium-magnesia glaze.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.399-399
• /
• 2009

CIS계 화합물 태양전지는 높은 광흡수계수와 열적 안정성 및 Ga 조성 조절을 통한 밴드갭 조절이 용이해 고효율 박막 태양전지로 각광 받고 있다. CIS 태양전지의 광 흡수층 제조 방법으로는 여러 가지 방법이 있지만 본 연구에서는 가장 높은 에너지 변환 효율을 달성한 Co-Evaporation 방법을 사용하기로 하였다. 미국의 NREL의 경우 Co-Evaporation 방법을 사용해 20%의 에너지 변환 효율을 달성한 바가 있다. 하지만 이러한 효율의 태양전지는 실험실에서 연구용으로 제작한 아주 작은 면적으로 태양전지 양산화에 그대로 적용하기는 힘들다. 따라서 CIGS 태양전지의 양산화 적용을 위해 대면적화가 필수적이다. 본 연구에서는 기존의 3 stage 방식을 이용해 광흡수층을 증착하여 최적화 조건을 연구하였다. 또한 기판의 면적 증가에 따라 효율과 Voc, Jsc, F.F가 얼마나 감소하는지 실험하여 보았다. 기판은 soda lime glass를 사용 하였으며 후면 전극으로 약$1{\mu}m$ 두께의 Mo를 DC Supptering 방법을 이용해 증착하였다. 다음으로 약 $2{\mu}m$이상의 광흡수층을 Co-Evaporation 방법을 이용하여 증착 하였으며 buffer층으로는 약 50nm의 CdS층을 CBD방법을 이용하여 제조 하였다. TCO층으로 약 50nm의 i-ZnO와 약 450nm의 Al-ZnO를 RF Sputtering 방법을 이용하여 증착 하였다. 마지막으로 앞면 전극으로 약 $3{\mu}m$의 Al을 Thermal Evaporation 방법으로 증착하였다. 태양전지 소자의 면적은 $0.49cm^2$, $25cm^2$, $100cm^2$로 각각 면적을 달리하며 효율을 비교 분석하였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.1
• /
• pp.70-75
• /
• 1992

This study was carried out to investigate the characteristics of a mutant, Pseudomonas maltophilia H-8M selected with the treatment of Pseudomonas maltophilia H-8 by N-methyl-N-nitro-N-nitrosoguanidine(MNNG). This mutant showed highest ability of cadmium accumulation. The growth rate of Pseudomonas maltophilia H-8M showed about 80% in 1000ppm Cd containing medium when compare with control for 36h at $30^{\circ}C$. Pseudomonas maltophilia H-8M not inhibited on the growth in addition of various heavy metal such as $Hg^{2+}$, $Zn^{2+}$, $Pb^{2+}$, $Cu^{2+}$, $Cr^{2+}$ and $Co^{2+}$, but inhibited in $Sn^{2+}$ containing medium, respectively. Pseudomonas maltophilia H-8M was accumulated the highest cadmium level of 62.3% on whole cell in the medium containing 50 ppm and 80% of accumulated cadmium was distributed in the cell wall.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.8.2-8.2
• /
• 2009

구리(Cu)-인듐(In)-갈륨(Ga)-셀레늄(Se)의 4 원소 화합물 반도체인 Cu(InGa)$Se_2$ (CIGS) 태양전지 세계 최고 셀효율은 2008년 현재 19.9% 로서 박막형 태양전지 중 가장 높은 효율을 보이고 있다. 이는 다결정(폴리) 실리콘 태양전지의 20.3%와 대등한 수준이다. 이 CIGS 태양전지는 제조단가를 표준 결정형 실리콘 태양전지 대비 50% 대로 획기적으로 낮출 수 있어 가장 경쟁력이 있는 차세대 재료로 꼽히고 있다. 본 연구에서는 CIGS태양전지를 고진공 물리 증작법으로 제작하였으며 표면과 박막의 순도를 외부오염을 방지하기 위하여 후면전극, 광흡수체 및 전면전극을 동일 진공에서 제작할 수 있는 멀티 챔버 클러스터 증착 시스템을 이용하였다. 기판으로 소다라 임유리, 후면전극으로 Mo, 전면전극으로 I-ZnO/Al:ZnO 및 ITO를 이용하였다. 버퍼층으로 CdS를 chemical bath deposition (CBD)를 이용하였다. 소자는 무반사막을 사용하지 않고 Al/Ni전극 그리드를 이용하였다. 이 소자로부터 0.22 $cm^2$에서 16%의 효율을 얻었다. 각 박막층 간 계면의 분석을 전기적인 특성, ellisometry에 의한 광특성, 표면과 결정성에 대한 SEM 및 XRD의 특성을 보고한다. 또한, 대표적 화합물 반도체 박막 태양전지인 CIGS 태양전지의 기술의 현황, 학문적인 과제 및 실용화의 문제점을 발표하기로 한다.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2014

When processing the biomass by Hydrothermal carbonization (HTC), a slow pyrolysis process, it produces bio-gas, biooil, and biochar. Among these end products, biochar is known for isolating or storing carbon and being used as a soil amendment. In this study, the characteristics of biochar generated by HTC at $250^{\circ}C$ for 1 hour, 2 hours, 3 hours, and 20 hours with synthetic food wastes and wood wastes were analyzed for potential uses in soil contaminated with heavy metals. The yield of biochar (weight %) increased when the ratio of wood wastes increased and showed a decreasing tendency as reaction time increased. Elemental analysis of biochar based on various conditions showed a maximum of 70% carbon (C) content. The carbon content showed an increasing tendency with the increase of wood wastes. Iodine adsorption test was peformed to determine the optimum reaction condition, which was 15% wood waste for mixing ratio and 2 hours for reaction time. Using biochar generated at the optimum condition, its capability of adsorbing heavy metals (Cd, Cu, Pb, Zn, Ni) was evaluated. It was concluded that lead (Pb) was removed efficiently while zinc (Zn) and nickel (Ni) were hardly adsorbed by biochar.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.5
• /
• pp.60-66
• /
• 2010

Zinc has a number of characteristics that make it well suited for use as a coating to protecting iron and steel products from corrosion. Its excellent corrosion resistance in most environments accounts for its successful use as a protective coating on a variety of products and in many exposure conditions. The excellent field performance of zinc coatings results from their ability to form dense, adherent films that corrode at a rate that ranges from 1% to 10% of the corrosion rate of ferrous materials, depending on the environment. Recently, EU RoHS and EU ELV prohibited the use of materials that adversely affect the environment, such as Pb, Hg, Cd, and $Cr^{+6}$. In this study, environmentally-friendly, Cr-free solutions (epoxy solution, acrylic solution, and urethane solution S-700) and organic/inorganic solution with Si; LRO-317) were used to evaluate the corrosion resistance of zinc-coated steel subjected to a saltwater spray for 72 hours. The coating of urethane solution (S-700) was best among the three kinds of solution with heat treatment during five minutes at $190^{\circ}F$. Test specimens with S-700 and LRO-317 coating were heat treated in a drying oven at 170, 180, 190, 200, and $210^{\circ}C$ for five minutes. The results show that the optimum corrosion resistance was $190^{\circ}C$ in EGI and $170^{\circ}C$ in HDGI, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.211-211
• /
• 2000

Carbon nanotubes (CNTs) have been spotlighted as one of promising field emission displays(FEDs). For the first time, to authors knowledge, we have developed the 9" color CNT-FEDs with the resolution of 240x576 lines. The 9" CNT-FEDs with diode-type and triode-type structures are presented. The well-dispersed CNT paste was squeezed onto the metal-patterned cathode glass. For the anode plate, the Y2O2S:Eu, ZnS:Ag,Cl low-voltage phosphors were printed for red, green, and blue colors, respectively. The vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images were demonstrated at 2 V/um. High brightness of 800, 200, and 150cd/m2 was observed on the green, red, and blue phosphors at V/um, respectively. Field emission characteristics of a triode-type CNT-FED were simulated using a finite element method. the resultant field strength on the cathode was modulated by gate bias and emitted electrons were focused on the anode. A relatively uniform emission image was experimentally achieved at the 800V anode. A relatively uniform emission image was experimentally achieved at the 800V anode and the 50-180 V gate biases. Energy distribution of electrons emitted from CNTs was measured using an energy analyzer. The maximum peak of energy curve corresponded to the Fermi energy level of CNTs. The whole fabrication processed of CNT-FEDs were fully scalable and reproducible. Our CNT-FEDs has demonstrated the high potential of large-area and full-color applications with very low cost fabrication and low power consumption.

• The Korean Journal of Physiology
• /
• v.26 no.2
• /
• pp.113-122
• /
• 1992

It is well known that chromaffin cells of adrenal medulla secrete catecholamine in response to sympathetic nerve activation and the influx of $Ca^{2+}$ through the voltage dependent $Ca^{2+}$ channels (VDCC) in the cell membrane do a major role in this secretory process. In this study, we explored the effect of divalent cations on VDCC of rat chromaffin cells. Rat (Sprague-Dawley rat, 150-250 gm) chromaffin cells were isolated and cultured. Standard giga seal, whole cell recording techniques were employed to study $Ca^{2+}$ current with external and internal solutions that could effectively isolate VDCC currents $(NMG\;in\;external\;and\;TEA\;and\;Cs^{2+}\;in\;internal\;solution)$. The voltage dependence and the inactivation time course of VDCC in our cells were identical to those of bovine chromaffin cells. A persistent inward current was first activated by depolarizing step pulse from the holding potential (H.P.) of -80 mV to -40 mV, increased to maximum amplitude at around +10 mV, and became smaller with progressively higher depolarizing pulses to reverse at around +60 mV. The inactivation time constant $(\tau)$, fitted from the long duration test potential (2 sec) was $1295.2{\pm}126.8$ msec $(n=20,\;1\;day\;of\;culture,\;mean\;{\pm}S.E.M.)$ and the kinetic parameters were not altered along the culture duration. Nicardipine $(10\;{\mu}M)$ blocked the current almost completely. Among treated divalent cations such as $Cd^{2+},\;Co^{2+},\;Ni^{2+},\;Zn^{2+}\;and\;,Mn^{2+},\;Cd^{2+}$ was the most potent blocker on VDCC. When the depolarizing step pulse from -80 mV to 10 mV was applied, the equilibrium dissociation constant $(K_d)$ of $Cd^{2+}\;was\;39\;{\mu}M,\;K_d\;of\;Co^{2+}\;was\;100\;{\mu}M\;and\;K_d\;of\;Ni^{2+}];was];780{\mu}M.$ The principal findings of this study are as follows. First, the majority of $Ca^{2+}$ channels in rat chromaffin cells are well classified to L-type $Ca^{2+}$ channel in the view of kinetics and pharmacology. Second, all divalent cations tested could block the $Ca^{2+}$ current and the most potent blocker among the tested was $Cd^{2+}$.

• Journal of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.41-46
• /
• 1984

To preconcentrate trace elements, microgram amounts of 5 heavy metals (Cu, Co, Ni, Zn and Cd) were precipitated with 8-hydroxyquinoline (oxine) and metal oxinates were extracted with stearic acid. And then each of the molten stearic acid extract with stearic acid. And then each of the molten stearic acid extract was poured into a glass ring and cooled for specimen preparation. The obtained specimens were analyzed by X-ray fluorescene spectrometry. And then conditions of precipitation formation and extraction, reproducibility, sensitivity and detection limit were observed. The relative standard deviation of specimen preparation was 1.0~5.7% and the detection limit was 5~$50{\mu}g$/100ml. The proposed preconcentration procedure exhibited a considerable inhancement and simplicity in preparing specimens.