• Advances in environmental research
• /
• v.6 no.4
• /
• pp.281-299
• /
• 2017

Single (0.005 M DTPA), sequential (six-step) and kinetic (0.05 M EDTA) extractions were performed to assess Cd, Cr, Cu, Ni, Pb, and Zn mobilization and their potential ecological risks in Abuja (Nigeria) water (WTS) and wastewater (WWTS) treatment sludges. Total metal levels (mg/kg) in WTS and WWTS, respectively were: Cd(3.67 and 5.03), Cr(5.70 and 9.03), Cu(183.59 and 231.53), Ni(1.33 and 3.23), Pb(13.43 and 17.87), Zn(243.45 and 421.29). DTPA furnished metal extraction yields (%) in WTS and WWTS, respectively as: Cd(11 and 6), Cr (15 and 7), Cu(17 and 13), Ni(23 and 3), Pb(11 and 12), and Zn(37 and 33). The metals were associated with the soluble/exchangeable, carbonate, Mn/Fe-oxide, organic matter and residual forms to varying degrees. Kinetic extractions cumulatively leached metal concentrations akin to the mobilizable fractions extracted sequentially and the leaching data fitted well into the Elovich model. Metal mobilities were concordant for the three leaching procedures and varied in the order:WTS>WWTS. Calculated ecological risk indices suggested moderate and considerable metal toxicity in WTS and WWTS, respectively with Cd as the worst culprit. The findings may be useful in predicting heavy metals bioavailability and risks in the sludges to guide their disposal and use in land applications.

• Environmental Engineering Research
• /
• v.18 no.3
• /
• pp.177-189
• /
• 2013

Studies were carried out on the speciation of heavy metals (Zn, Cu, Mn, Fe, Ni, Pb, Cd, and Cr) during rotary drum composting of water hyacinth (Eichhornia crassipes) for a period of 20 days. Five different proportions of cattle manure, water hyacinth and sawdust were prepared for composting. This study concluded that, rotary drum was very efficient for the degradation of organic matter as well as for the reduction of mobility and bioavailability of heavy metals during water hyacinth composting. The results from the sequential extraction procedure of heavy metals shows that rotary drum composting changed the distribution of five fractions of Zn, Cu, Mn, Fe, Ni, Pb, Cd, and Cr. The highest reduction in the bioavailability factors of Pb and Cd was observed during the process. The total concentration of Cu, Cr, and Cd was very low compared to the other metals (Zn, Mn, Fe, Ni, and Pb); however, the percentage of exchangeable and carbonate fractions of these metals was similar to other metals. These results confirmed that the bioavailability of metals does not depend on the total concentration of metals. From this study, it can be concluded that the addition of an appropriate proportion of cattle manure significantly reduced the mobile and easily available fractions (exchangeable and carbonate fractions) during water hyacinth composting in rotary drum.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.417-417
• /
• 2012

For desired optical properties of QDs, it is very important to reduce the presence of defects on their surfaces. Passivation of surface defects using larger band gap materials is the most effective way. Some groups successfully synthesized Cd based multi-shell structured quantum dots and improved its optical properties. However, its productivity has limit because of the amounts of glass ware and space. In this research, we try to synthesize Cd based multi-shell structured nanocrystal quantum dots to overcome demerits of conventional batch synthetic method. This reactor composed pump, SUS reaction part (3.2 mm stainless steel and furnace) and batch mixer. We successively synthesized CdSe/CdS/ZnS quantum dot at this reactor in one step.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.5
• /
• pp.39-46
• /
• 2005

This study was conducted to investigate the heavy metal accumulation in wild plants. The samples from 5 plant species on 14 sites were taken on the roadside where urban and industrial regions in northern Gyeonggi do. Artemisia princeps var. orientalis, Chenopodium album L. var. centrobrum, Erigeron canadensis L., Rumex crispus L. and Taraxacum platycapum H. Dahlst were taken from different parts of the plants gathered in surveyed sites for analysing. This study classified which species were suitable to accumulators, excluders, or indicators which were provided as Phytoremediation for heavy metals(Cd, Cr, Ni, Pb and Zn) and considered the applicability of that work. 1. The mean accumulation of 6 heavy metals in plants was as follows; Zn> Cu> Cr> Pb> Ni> Cd in rows except for Ni and Pb in Erigeron. 2. The highest heavy metal accumulators were Taraxacum and Artemisia. 3. The comparison of heavy metal accumulations between the tops and roots in the plants was as follows; Zn> Cd> Pb> Ni> Cu> Cr. 4. Comparison of heavy metal accumulations between tops and roots, root parts were higher than the top parts in most of the plants. Especially, in Taraxacum, a ratio was over 1.0 in Cr, Ni, and Zn. Therefore, Taraxacum was an accumulator for 3 heavy metals. And Erigeron, Chenopodium, Rumex, Artemisia were good for excluders which had lower than 1.0.

• Journal of Ecology and Environment
• /
• v.29 no.5
• /
• pp.453-460
• /
• 2006

Upo wetland is the largest inland wetland in Korea as Ramsar Convention Area. The purposes of the study were to investigate the levels of heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) in the sediment and Cipangopaludina chinensis malleata from three sites of the wetland and to assess the potential of the gastropod as a bioindicator for heavy metal levels. The gastropods were dissected into shell and soft tissue without the digestive and excretive organs. The levels of Cd, Cu and Pb were below the guideline of Soil Environment Conservation Act and the heavy metals except Cr were slightly different among the sites. Cd was higher in Upo site ($0.32{\mu}g/g$) than Sajipo site ($0.28{\mu}g/g$). Cu and Zn showed the highest value in Sajipo as $43.5{\mu}g/g\;and\;39.8{\mu}g/g$, respectively while the concentrations of Pb and Zn were the highest in Upstream as $58.8{\mu}g/g\;and\;138{\mu}g/g$, respectively. In the soft tissues and shells of the gastropod, the overall common trend in the concentrations of the heavy metals was revealed with the following order: Zn > Cu > Cr > Ni > Pb > Cd and Ni > Zn > Cr > Cu > Pb > Cd, respectively. Although the soft tissues exhibited higher concentrations of the heavy metals except Ni than the shell in the gastropod, the levels of Cd and Pb in the gastropod were generally below the restrictive values set up by Korea Food & Drug Administration. From Duncan's Multiple Range Test (DMRT) results, the concentrations of Pb and Zn in the sediments among the sites were reflected on the soft tissue (Pb) and the shell (Pb and Zn) of the gastropod in the same order. The lower value of coefficient of variation (CV) in Pb concentration of the shell than in that of the soft tissue supports the usefulness of the shell as a bioindicator for Pb pollution. Although the CV value in the shell was a little higher than in the soft tissue, DMRT results and the stability of incorporated Zn into the shell support the use of the shell of the gastropod as a potential bioindicator for long-term contamination of Zn.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.11
• /
• pp.490-492
• /
• 2005

A study on radiation hardening of infrared(IR) detector, the chief component of IR camera was performed. The radiation test on IR sensor passivated with the ZnS by Co$^{60}$ gamma-ray over 1 Mrads showed the reduction in Ro by 1/100 which was related to the noise level. This effect that was caused by carrier trapping in the ZnS passivation layer increased the leakage current and resulted in degradation in the device performance. For the radiation hardening of IR devices we suggested the ones with CdTe passivation layer which had a tendency to reluctant to carrier trapping in its layer and developed test patterns. Radiation test to the patterns showed that the our CdTe passivated device could survived over 1 Mrad gamma-ray dose.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.309-309
• /
• 2013

기존의 CIGS 태양전지는 window 층(GZO/ZnO/CdS)에서의 투과 및 반사 손실을 줄이기 위하여 MgF2를 이용한 AR (Anti Reflection) 층을 적용하여 cell을 제작하고 있다. 현재 단위공정을 줄이고 시간적 경제적 비용을 절감하기위해 무반사 코팅층 없이 표면의 구조를 변화 시키거나 CIGS 태양전지의 window 층만으로 cell 구조에 적용하는 연구가 많이 진행되고 있다. 본 연구는 AR층과 window층 역할을 동시에 만족하는 일체화된 window층 두께를 설계하고 성장한 후, window층의 열처리 전후의 구조적, 광학적 및 전기적 특성을 비교 평가하였다. Macleod simulation을 이용하여 window 층을 설계한 후, RF magnetron sputtering법을 이용하여 상온성장 시킨 후 N2 분위기에서 후열처리 조건에 따른 박막의 구조적, 전기적 및 광학적 특성을 변화를 X-ray diffractometer, Field emission-scanning electron microscope, Atomic force microscopy, 4 point probe, Hall 측정, 투과도 및 반사도등으로 비교 평가하였다.

• Journal of Powder Materials
• /
• v.14 no.3 s.62
• /
• pp.180-184
• /
• 2007

The material design and synthesis are of important to modem science and technology. Here, we report the synthesis of multifunctional nanomaterials with different properties: feroelecties $YMnO_3$ and multiferroic materials such as $CoFe_2O_4-YMnO_3,\;Fe_3O_4-YMnO_3,\;CoFe_2O_4-Cd_{0.85}Zn_{0.15}S,\;and\;Fe_3O_4-Cd_{0.85}Zn_{0.15}S$ nano-composites by using a chemical synthesis process. These results provide a simple and convenient synthesis process to produce multifunctional nanocomposites.

• Advances in nano research
• /
• v.1 no.3
• /
• pp.153-158
• /
• 2013

An approach to achieving of spatially homogeneous, ordered ensemble of semiconductor quantum rods in polymer film of polyvinyl butyral is reported. The CdSe/ZnS quantum rods are embedded to the polymer film. Obtained film is stretched up to four times to its initial length. A concentration of quantum rods in the samples is around $2{\times}10^{-5}$ M. The absorption spectra, obtained in the light with orthogonal polarization, confirm the occurrence of spatial ordering in a quantum rod ensemble. Anisotropy of the optical properties in the ordered quantum rod ensemble is examined. The presented method can be used as a low-cost solution for preparing the nanostructured materials with anisotropic properties and high concentration of nanocrystals.

• Clean Technology
• /
• v.23 no.1
• /
• pp.27-33
• /
• 2017

In this study, toxicities of seven metals (Cu, Cd, Cr, As(III), As(V), Zn, Ni) and five metal oxide nanoparticles (NPs: CuO, ZnO, NiO, $TiO_2$, $Fe_2O_3$) were evaluated based on the growth of Chlorella vulgaris. Effect on algae growth was evaluated by integrating the results of absorption, chlorophyll content, and cell count. The toxicity rankings of metals was observed as Cr ($0.7mgL^{-1}$) > Cu ($1.7mgL^{-1}$) > Cd ($3.2mgL^{-1}$) > Zn ($3.9mgL^{-1}$) > Ni ($13.2mgL^{-1}$) > As(III) ($17.8mgL^{-1}$) ${\gg}$ As(V) (> $1000mgL^{-1}$). Slightly different orders and sensitivities of metal toxicity were examined depending on endpoints of algal growth. In case of NPs, regardless of endpoints, similar toxicity rankings of NPs ($TEC_{50}$) were observed, showing ZnO ($2.4mgL^{-1}$) > NiO ($21.1mgL^{-1}$) > CuO ($36.6mgL^{-1}$) > $TiO_2$ ($62.5mgL^{-1}$) > $Fe_2O_3$ ($82.7mgL^{-1}$). These results indicate that an integrating results of endpoints might be an effective strategy for the assessment of contaminants.