• 제목/요약/키워드: CdI2

검색결과 742건 처리시간 0.029초

ADC12 다이캐스팅 합금의 미세조직 및 기계적 특성에 미치는 개량 원소 첨가의 영향 (Effect of Alloying Element Addition on the Microstructure and Wear Properties of Die-casting ADC12 Alloy)

  • 강연지;윤상일;김동현;이기안
    • 소성∙가공
    • /
    • 제28권1호
    • /
    • pp.34-42
    • /
    • 2019
  • In this study, various alloying elements (Cr, Sr, Ca, Cd) were added to improve the mechanical properties of ADC12 fabricated by a die casting process. The effect of alloying elements on the microstructure and mechanical properties were investigated. The phase analysis results of the modified ADC12 alloy with conventional ADC12 alloy, showed the similar characteristics of Al matrix, Si phase, $CuAl_2$ phase and the Fe intermetallic phase. As a result of the microstructure observation, the secondary dendrite arm spacing (SDAS) was shown to have decreased after the addition of the alloying elements. The eutectic Si phase, which existed as flake form in the conventional ADC12 alloy, was modified finely as a fiber form in the modified ADC12 alloy. It was observed that the $CuAl_2$ phase as the strengthening phase was relatively finely distributed in the modified ADC12 alloy. The Fe intermetallic appeared as a Chinese script shaped $Al_6$ (Mn,Fe) which is detrimental to mechanical properties in conventional ADC12 alloy. On the other hand, in the modified ADC12 alloy, polyhedral ${\alpha}-Al_{15}Si_2$ $(Fe,Mn,Cr)_3$ was observed. The tensile properties were improved in the modified ADC12 alloy. The yield strength and tensile strength increased by 12.4% and 10.0%, respectively, in the modified ADC12 alloy, and the elongation was also seen to have been increased. As a result of the pin on disk wear test, the wear resistance properties were also improved by up to about 7% in the modified ADC12 alloy. It is noted that the wear deformation microstructures were also observed, and it was found that the fine eutectic Si and strengthening phases greatly improved abrasion resistance.

대동맥교약증 환아의 해부학적 형태, 동반심기형, 연령, 수술방법등이 수술결과에 미치는 영향 (Influence of Anatomy, Associated Anomalies, Age, and Surgical Methods on the Surgical Results of Aortic Coarctation)

  • 이정렬;김혜순
    • Journal of Chest Surgery
    • /
    • 제30권4호
    • /
    • pp.363-372
    • /
    • 1997
  • 본 연구는 1986년 6월 3일부터 1995년 12월 31일까지 서울대학교 어린이 병원 흉부외과에서 경험한 144례의 대동맥 교약증 환아를 대상으로, 술후 결과에 영향을 미치는 여러 가지 요소들을 분석하였다. 환아의 평균 연령은 15.73+32.43(범 위 0.1-191.0, 중앙값=3.3)개월이 었고, 이중 11)례(78.5%)의 환아는 영아, 25례(17.4%)는 신생아였다. 환아를 대동맥궁 협 착 부위와 동반 심기형에 따라(제 1형:국소 협착, 제2형:대동맥 헙부 협착, 제3형 :대동맥 협부 및 횡대동맥궁 협착, h:심실중격결손증 동반, B:기타 복 잡 심기 형 동반) 9가지로 분류한 결과, 1, IA, IB, I, IIA, IIB, III, IIIA, IIIB형이 각각 25, 9, 6, 24, 35, 15, 4, 19, 7례 였다. 수술방법은 쇄골하동맥편 교약성형술(subclavian-flap coarctoplasty, SFC: 60례), 절단 및 문합술(resection and anastomo sis, R&A: 44례), 확장된 대동맥성형술(extended aortoplasty, Ex-Ao: 26 례), 덮개포편술(onlay patch, Onlay: 14례)이 사용되었다. 총수술 사망률은 16.0%(23/144)였고, 수술 사망률을 높이는 인자로 협착부위(I, II, III형) 동반 심기형(0, A, B), 환아의 연령, 수술방법, 단계수술 \ulcorner부 등이 분석되었는데 이중 횡대동맥궁협착을 동반하는 III형(I형 사망률=2.5%(1/40), II형=17.6% (13/74), III형=30%(9/30); p(0.01), B형(0형 사망률=3.8%(2/53), A형 =15.9%(10/63), B형 =39.3%(11/28); p(0.01) 등이 의미있는 위험 인자였다. 생존환아 121례는 술후 평균 29.1+28.8(범위 0-129.2)개월 외래 추 적되 었으며 이중 술후 협착을 보였던 경우는 18례로 14.9%의 헙착률은 보였다. 생존환자중 77례의 환자 (I형 20명. ll형 42명, 111형 15명)에서 술전, 술후 3개월 이내, 술후 6개월이후의 심에코도상의 대동맥 각 부위 크기에 관한 자료의 입수가 가능하였으며 이를토대로무명동맥 직근위부의 상행대동맥 직경에 대 한 대동맥협부 직경의 비율(대동맥협부지수)및 경동맥부위의 횡대동맥 직경비율(횡대동맥지수)을구하 여 형태 별로 술전, 수술 직후 6개월이상 경과후의 대동맥 크기 변화의 양상을 관찰하였다. 제 I, II, III형 모두에서 술전에 비하여 술후 평균 대동맥협부지수의 의미있는 증가가 관찰되었으며(p<0.01),제 III형에서는 횡대동맥지수의 의미있는 증가도 관찰되었다(p<0.01). 재헙착으로 진단된 I, II형의 수술직후 대 동맥협부지수와 111형의 횡대동맥 지수는 비협착군에 비하여 의미있게 작았는데 이는 아마도수술 당시 협 착 부위의 완전제거가 이루어지지 않은 것이 원인이라고 사료되었다. 본 분석에서는 어린 연령(3개월 이하), 3개월이하에 시행한 쇄골하동맥편 교약성형술이 의미있는 재협착의 위험요소로 밝혀졌다. 결론 적으로 저자등은 본연구를 통하여 대동맥협부지수, 횡대동맥 지수 등이 개개 대동맥교약 환아의 해부학 적, 임상적 특징을 파악하는데 도움이 되는 도구라는 사실을 발견하였고 아울러 교약의 해부학적 특성, 동반 심기 형, 연령, 수술방법 등이 수술사망 및 재협착에 영향한다는 사실을 입증하였다.

  • PDF

(Polystyrene-divinylbenzene)-thiazolylazo phenol형 킬레이트 수지에 의한 금속이온의 분리 및 농축에 관한 연구(I) (Studies on the Separation and Preconcentration of Metal Ions by Chelating Resin containing (Polystyrene-divinylbenzene)-thiazolylazo Phenol Derivatives(I))

  • 임재희;김민균;이창헌;이원
    • 분석과학
    • /
    • 제9권3호
    • /
    • pp.279-291
    • /
    • 1996
  • 미량 금속이온을 선택적으로 분리, 농축 및 회수하기 위해 물리적 특성이 서로 다른 XAD-2, 4 및 16 다공성 수지에 2-(2-thiazolylazo)-p-cresol(TAC) alc 4-(2-thiazolylazo)orcinol(TAO)을 화학적으로 결합시켜 킬레이트 수지를 합성하고 뱃치법으로 U(VI) 등 10개 금속이온들의 흡착 특성을 조사 비교하였다. 킬레이트 수지의 합성률은 XAD-16-TAC형 수지는 0.60 mmol/g이었고 XAD-16-TAO형은 0.68mmol/g으로서 수지의 표면적이 큰 XAD-16형 수지가 XAD-2, 4형 수지보다 높은 합성률을 나타내었다. XAD-16-TAC와 XAD-16-TAO 킬레이트 수지는 1~5M 의 $HNO_3$, HCl 및 NaOH 등의 산과 염기성 용액에서 비교적 안정하였다. 그리고 U(VI) 이온을 10회 이상 반복적으로 흡착 및 탈착을 시킨 결과 연속적으로 재사용할 수 있는 안정한 내구성을 가지고 있음을 확인하였다. XAD-16-TAC 및 XAD-16-TAO형 수지에 대한 금속 이온의 최척 흡착조건과 흡착 특성을 조사한 결과는 금속이온이 킬레이트 수지에 흡착될 때 평형에 도달하는 시간은 약 1시간 정도였으며, XAD-16형 수지에서 흡착률이 가장 높았다. 그리고 금속이온들의 흡착률에 미치는 pH의 영향을 보면 U(VI)을 비롯한 대부분의 금속이온들은 pH 5~6 범위에서 최대로 흡착됨으로써 최척 pH 를 5로 정하였다. 또한 U(VI) 이온의 흡착에 미치는 공존이온의 영향을 보면 음이온인 $Cl^-$, $NO{_3}^-$, ${SO_4}^{2-}$, $CH_3COO^-$ 이온 및 $Na^+$, $K^+$, $Mg^{2+}$$Ca^{2+}$과 같은 양이온들은 흡착에 거의 영향을 미치지 않았다. 그러나 $CO{_3}^{2-}$$UO{_2}^{2+}$$[UO_2(CO_3)_3]^{4-}$의 안정한 착물을 형성하므로 U(VI) 이온의 흡착능을 크게 감소시켰다. 선택적인 특정 금속이온의 분리를 위하여 EDTA, CDTA 및 NTA 등과 같은 가리움제를 첨가하여 그 영향을 조사한 결과 NTA에 의한 가리움 효과가 10가지 혼합 금속이온 중 U(VI) 이온에 대하여 가장 큰 것으로 나타났다.

  • PDF

대학교수들의 학술정보원 이용행태분석: K대학의 사회과학교수집단을 중심으로 (The Analysis on the Academic Information Seeking Behavior of College Professors: A Social Scientist Group in the K-University)

  • 박준식;박일종;신상헌
    • 정보관리학회지
    • /
    • 제17권3호
    • /
    • pp.21-43
    • /
    • 2000
  • 본 논문은 사회과학자들의 학술정보원 이용행태를 분석하고 이에 따른 효과적인 학술정보원의 이용방법을 제시하였다. 이를 위하여 현재 한 대도시의 대학에 재직중인 사회과학관련 전공의 교수들을 대상으로 응답자의 연구환경에 대한 만족도, 특성 및 연구자료의 이용행태 등을 설문조사하여 응답자의 주 연구분야, 직위, 대학재직기간, 연구기간에 따른 자료수집기간과 방법, 자료수집의 난이도 및 검색방법의 선호도, 자료수집 소요기간, 최신자료의 이용률 등을 분석하였다. 사화과학도들이 학술정보원을 이용할 때, 이를 위한 미래 연구과제 및 제언도 서술하였다.

  • PDF

황토, 갯벌 및 머드의 중금속 흡착율에 관한 실험적 연구 (An Experimental Study on the Adsorption rates of Heavy Metals by Yellow Loess, Tidal Plat Sediment and Mud)

  • 이인숙;이미영;이택중;김현정;이병창;정명상;방은옥;송현실;황혜경;이중호;조영채
    • 환경위생공학
    • /
    • 제19권2호
    • /
    • pp.15-22
    • /
    • 2004
  • Yellow loess, Tidal plat sediment, and mud are blown to be high in adsorption though they have great distinction according to the ratio of clay minerals content and their kinds. Thus one of the samples for this study can be obtained by drying of Yellow loess, Tidal plat sediment, and the mud which is semifinished products that are from the progress of heat treatment and making homogeneity which can be found everywhere in our county. Another sample can be prepared by reducing pollutants with the adsorbent and by homing heavy metals of their on. With the samples, noxious heavy metals such as Pb, Cd, and essential trace elements such as Cu, Fe, Mn by each concentration is tested for adsorption according to pH, the kinds of adsorbents and the amount of injection. With the help of these steps, this study shows that the adsorbents, which are green, reducing the additional pollution and low in price, can be found. It also shows that the optimal condition for removing pollutants can be found and the basic materials for treating water can be offered. The results were as follows ; Yellow loess shows the rates of adsorption by more than 50% and Tidal plat sediment and Mud show it by more than 90%. Thus Tidal plat sediment and Mud are higher than Yellow loess the rates of adsorption. The pH should be treated in natural condition because the rates of adsorption of Pb, Cd, Cu, Mn excepting Fe in mud is higher in pH 7 than in pH 3 of Yellow loess, Tidal plat sediment, and Mud. The drying adsorbents are good to use because the rates of adsorption of heavy metals has tendency to be higher in the drying method than in the burning method. It is considered that the more the mont of the injection of the adsorbent is , the higher the rates of adsorption is, and one gram is reasonable for the amount of the injection of Tidal plat sediment and mud. Yellow loess is suitable for the treatment of the water that includes low concentration of heavy metals because it has the lower rate of adsorption as the concentration of noxious heavy metals is higher. It is thought that Tidal plat sediment and Mud is proper for the treatment of the water that includes high concentration of heavy metals because the rates of adsorption has not been changed as the concentration of heavy metals increases.

Effect of diets with different energy and lipase levels on performance, digestibility and carcass trait in broilers

  • Hu, Y.D.;Lan, D.;Zhu, Y.;Pang, H.Z.;Mu, X.P.;Hu, X.F.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제31권8호
    • /
    • pp.1275-1284
    • /
    • 2018
  • Objective: A 28-d trial was conducted to evaluate the effect of diets with different energy and lipase levels on performance, nutrient digestibility, serum profiles, gut health, and carcass quality in broilers. Methods: A total of 720 one-day-old male Ross 308 broilers ($45.4{\pm}0.5g$) were randomly assigned to one of the following four treatments: i) RET, reduced energy treatment (metabolizable energy = 2,950 and 3,100 kcal/kg for starter and finisher diet), ii) BDT, basal diet treatment (metabolizable energy = 3,050 and 3,200 kcal/kg for starter and finisher diet, iii) RET015, RET+0.15 g/kg lipase, and iv) RET03, RET+0.3 g/kg lipase. There were 10 replications (cages) per treatment with 18 birds per cage. Results: During d 1 to 14, broilers fed BDT, RET015, and RET03 diets had higher (p<0.05) body weight gain than those fed RET diet. During d 1 to 14, 15 to 28 and the overall experiment, feed conversion ratio in RET03 treatment was lower (p<0.05) compared with RET treatment. On d 14, the apparent total tract digestibility (ATTD) of dry matter (DM), ether extract (EE), and gross energy in RET03 treatment was higher (p<0.05) than those in RET treatment, while the ATTD of N was increased (p<0.05) by RET03 treatment. On d 28, broilers fed RET03 diet had higher (p<0.05) ATTD of DM than those fed RET and RET015 diets, while the ATTD of EE in BDT and RET03 treatments was increased (p<0.05) compared with RET and RET015 treatments. Broilers fed RET03 diet had higher villus height (VH) and VH:crypt depth (CD) ratio than those fed RET and BDT diets. The activity of pancreatic lipase in BDT and RET03 treatments was higher (p<0.05) than that in RET treatment. Conclusion: Taken together, lipase supplementation (3,000 U/kg feed) increased growth performance, nutrient digestibility, VH, VH:CD ratio and lipase activity, but decreased triglyceride, low-density lipoprotein cholesterol and the abdominal fat percentage in broilers fed reduced energy diet.

Saprolegnia parasitica Isolated from Rainbow Trout in Korea: Characterization, Anti-Saprolegnia Activity and Host Pathogen Interaction in Zebrafish Disease Model

  • Shin, Sangyeop;Kulatunga, D.C.M.;Dananjaya, S.H.S.;Nikapitiya, Chamilani;Lee, Jehee;De Zoysa, Mahanama
    • Mycobiology
    • /
    • 제45권4호
    • /
    • pp.297-311
    • /
    • 2017
  • Saprolegniasis is one of the most devastating oomycete diseases in freshwater fish which is caused by species in the genus Saprolegnia including Saprolegnia parasitica. In this study, we isolated the strain of S. parasitica from diseased rainbow trout in Korea. Morphological and molecular based identification confirmed that isolated oomycete belongs to the member of S. parasitica, supported by its typical features including cotton-like mycelium, zoospores and phylogenetic analysis with internal transcribed spacer region. Pathogenicity of isolated S. parasitica was developed in embryo, juvenile, and adult zebrafish as a disease model. Host-pathogen interaction in adult zebrafish was investigated at transcriptional level. Upon infection with S. parasitica, pathogen/antigen recognition and signaling (TLR2, TLR4b, TLR5b, NOD1, and major histocompatibility complex class I), pro/anti-inflammatory cytokines (interleukin $[IL]-1{\beta}$, tumor necrosis factor ${\alpha}$, IL-6, IL-8, interferon ${\gamma}$, IL-12, and IL-10), matrix metalloproteinase (MMP9 and MMP13), cell surface molecules ($CD8^+$ and $CD4^+$) and antioxidant enzymes (superoxide dismutase, catalase) related genes were differentially modulated at 3- and 12-hr post infection. As an anti-Saprolegnia agent, plant based lawsone was applied to investigate on the susceptibility of S. parasitica showing the minimum inhibitory concentration and percentage inhibition of radial growth as $200{\mu}g/mL$ and 31.8%, respectively. Moreover, natural lawsone changed the membrane permeability of S. parasitica mycelium and caused irreversible damage and disintegration to the cellular membranes of S. parasitica. Transcriptional responses of the genes of S. parasitica mycelium exposed to lawsone were altered, indicating that lawsone could be a potential anti-S. parasitica agent for controlling S. parasitica infection.

The Effect of the Hydrogen Bond Network in the $S_1$-pocket on Catalytic Activity of Serine Protease, Achromobacter Protease I (API)

  • Lim, Seong-Il;Byun, Myung-Woo;Choi, Cheong
    • Journal of Microbiology and Biotechnology
    • /
    • 제8권2호
    • /
    • pp.158-164
    • /
    • 1998
  • Crystal structural analyses of the API-TLCK complex revealed that the ${\epsilon}$-amino group (NZ) of the lysyl part of TLCK forms hydrogen bonds with OD1 of $Asp^225$ which is a substrate specificity determinant of API, OG of $Ser^214$, O of $Ser^214$, OG1 of $Thr^189$, and O of $Thr^189$ l89/. The ${\beta}$-carboxyl oxygen of $Asp^225$ forms hydrogen bonds with the NE1 of $Trp^182$. From these observations, it is thought that besides $Asp^225$, $Thr^189$, $Ser^214$, and $Trp^182$ may also contribute to the steric specificity for lysine and high proteolytic activity of API. The side-chain hydroxyl groups of $Thr^189$ and $Ser^214$ were removed to elucidate the role of these hydrogen bonds in the $S_1$-pocket. The $k_{cat}$/$K_m$ of T189V, S214A, and T189V.S214A were decreased to 1/4, 1/3, and 1/46, respectively, of the value for native API. The decreased activities were mainly due to the increase of $K_m$. The CD and fluoroscence spectra of the three mutants were similar to those of wild-type API. With regards to the kinetic parameters ($K_i\;and\;k_2$) of mutants for the reaction involving TLCK and DFP, $k_2$decreased by increase of $K_1$ only. These results suggest that the decreased catalytic activity of these mutants is caused by the partial loss of the hydrogen bond network in the $S_1$-pocket. On the other hand, the similarity of enzymatic properties between W182F and the native enzyme suggests that the hydrogen bond between OD2 of $Asp^225$ and NE1 of $Trp^182$ is not directly related to the reaction of $Asp^225$ with the substrate.

  • PDF

유근피 약침이 제2형 Collagen 관절염에서 MIF 활성 억제 및 T세포 분화 조절에 미치는 영향 (The Effect to Inhibiting MIF Activation and Controlling of T Cell Specialization of Ulmus Davidiana Planchon Herbal Acupuncture on TypeII Collagen-induced Arthritis in Mice)

  • 이창환;조재용;이승덕;김경호;박인식;김갑성
    • Journal of Acupuncture Research
    • /
    • 제25권4호
    • /
    • pp.81-94
    • /
    • 2008
  • Rheumatoid arthritis(RA) is a general, chronic, inflammatory and auto-immune disease and it can lead to joint edema, pain, stiffness which are caused by an inflammation in synovium covering our joints. Ulmus davidiana Planchon is a traditional herb used for the treatment on various inflammations, gastrointestinal trouble, ENT(ear, nose, and throat) disease, edema, cancer etc. and it works effectively on arthritis as well. In these study to search for the treatment efficacy of Ulmus davidiana Planchon in RA, I measure manifestation of cytokine gene in synoviocyte treated with Ulmus davidiana Planchon herbal acupuncture and in EL-4 cell, manifestation of cytokine gene cell related to T-cell. And after Ulmus davidiana Planchon herbal acupuncture treatment in Collagen induced arthritis(CIA) which has been known by a general model of RA, DBA mice, I observed foot thickness, general shape of synovium, early cytokine induce CIA and, generation and mutation of cytokine related to the control of T-cell specialization. It comes to conclusion as belows. 1. In synovium treated with Ulmus davidiana Planchon herbal acupuncture, there was the decrease in MIF mRNA does-dependently. Incase of CIA mice treated with Ulmus davidiana Planchon herbal acupuncture, there were the decrease in the damage in synovium and generation of the MIF which is related to induction of the early RA cytokine and IL-6 proinflammatory cytokine. 2. In case of EL-4 treated with Ulmus davidiana Planchon herbal acupuncture, there were decrease in the manifestation of the IL-2 mRNA, but the increase in the manifestation of the IL-4 does-dependently. 3. In the synovium of CIA mice treated with Ulmus davidiana Planchon herbal acupuncture, there were the decrease in generation of IL-2, IL-12 and CD-28, but the increase in generation of IL-4. These result suggest that Ulmus davidiana Planchon can block the process of the early RA by Inhibiting MIF activation, and mitigate Rheumatoid Arthritis by controlling Tcell specialization.

  • PDF

Stainless steel 기판에서 제조된 CIGS 박막 태양전지의 ZnO 확산 방지막을 이용한 deep level defect 감소 연구

  • 김재웅;김혜진;김기림;김진혁;정채환
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.393-393
    • /
    • 2016
  • Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 높은 효율과 낮은 제조비용, 높은 신뢰성으로 인해 박막 태양전지 중 가장 각광받고 있다. 특히 유리기판 대신 가볍고 유연한 철강소재나 플라스틱 소재를 이용하여 발전분야 외에 건물일체형, 수송용, 휴대용등 다양한 분야에 적용이 가능하다. 이러한 유연 기판을 이용한 CIGS 태양전지의 개발을 위해서는 기판의 특성에 따른 다양한 공정개발이 선행되어야 한다. Stainless steel과 같은 철강기판의 경우 Fe, Ni, Cr등의 불순물이 확산되어 흡수층의 특성을 저하시켜 효율을 감소시킨다. 따라서 이러한 철강 기판의 경우 불순물의 확산을 방지하는 확산방지막이 필수적이다. 이러한 유연기판의 특성을 고려하여 본 연구에서는 기존의 두껍고 추가 장비가 요구되는 SiOx나 Al2O3 대신 200nm 이하의 ZnO 박막을 이용하여 확산방지막을 제조하였다. 유연기판으로 STS 430 stainless steel을 이용하였다. 먼저 stainless steel 기판을 이용하여 기판에 의한 흡수층의 특성을 분석하였으며 ZnO 확산 방지막의 유무 및 두께에 따른 흡수층 및 소자의 특성을 분석하였다. 이때 확산 방지막은 기존 TCO 공정에서 사용되는 i-ZnO를 사용하였으며 RF sputter를 이용하여 50~200nm로 두께를 달리하며 특성 비교를 실시하였다. 효율은 확산방지막을 적용하지 않았을 때 약 5.9%에서 확산 방지막 적용시 약 10.7%로 증가하였다. 그 후 기판으로부터 확산되는 불순물의 유입에 의한 결함을 분석하기 위해 DLTS를 이용하여 소자 특성을 분석하였다. 온도는 80~300K으로 가변하며 측정을 실시하였으며 그 후 계산을 통해 activation energy와 capture cross section 값을 구하였다. DLTS 분석 결과 Ni이 CIGS 흡수층으로 확산되어 NiCu anti-site를 형성하여 태양전지의 효율을 감소시키는 것을 확인하였다. 모든 흡수층은 Co-Evaporation 방법을 이용하여 제조하였으며 제조된 흡수층은 SEM, XRF, XRD, GD-OES, PL, Raman등을 이용하여 분석하였으며 그 외 일반적인 방법을 이용하여 Mo, CdS, TCO, Al grid를 제조하였다. AR 코팅은 제외 하였으며 제조된 소자는 솔라 시뮬레이터를 이용하여 효율 특성 분석을 실시하였으며 Q.E. 분석을 실시하였다.

  • PDF