• Journal of environmental and Sanitary engineering
• /
• v.18 no.4
• /
• pp.24-35
• /
• 2003

Recent epidemiologic studies revealed that the concentration of air pollutants and fine particulated matter have some effects on health status and are associated with increased mortality and morbidity. The purpose of this study was to characterize background mass concentration of fine particle (PM2.5) and metallic composition from September 2001 to August 2002 in comparison with a medium city, Asan and metropolitan city, Seoul. Conclusively, proper management for fine particles was required in a medium city, Asan, considering the concentrations of metallic elements in fine particles in Asan were relatively higher than those in Seoul. The results were as followed. 1. Average mass concentrations of fine particles in Asan and Seoul were 37.70(${\pm}18.41{\;}{\mu}g/\textrm{m}^3$) and 5.83(${\pm}38.50$) ${\mu}g/\textrm{m}^3$, respectively. When the weather conditions were classified as normal and yellow-sand, measured average mass concentrations of fine particles in yellow-sand weather condition was significantly higher than those of normal weather condition in both cities (p<0.05). 2. Depending on seasons, measured average mass concentrations of fine particles in Asan and Seoul in spring were 47.76(${\pm}19.07$) ${\mu}g/\textrm{m}^3$m and 61.53 (${\pm}4.37$) ${\mu}g/\textrm{m}^3$, respectively. In summer, the average mass concentrations of fine particles in Asan and Seoul were 29.44(${\pm}9.85$) ${\mu}g/\textrm{m}^3$ and 25.42(${\pm}8.10$) ${\mu}g/\textrm{m}^3$, respectively. Especially, the concentration was the highest in spring and the lowest in summer among four seasons. 3. Average concentrations of manganese(Mn), iron(Fe), chromium(Cr), cadmium(Cd), lead(Pb) and silicon(Si) in fine particles in Asan were significantly higher in Seoul (p<0.05). Average concentration of Si in fine particle in Asan was statistically higher than that of Seoul during yellow -sand condition (p<0.05). 4. Considering the characterization of four seasons, average Pb concentration of fine particle in Asan is significantly higher than that of Seoul in spring(p<0.01). In summer, average Mn and Cr concentrations of fine particle in Asan is higher than those of Seoul (p<0.05). Average Mn, Fe. Cr and Si concentrations in fall (p<0.05), and average Mn, Fe, Cr, Pb, and Si concentrations in winter (p<0.05) in Asan were higher than those of Seoul, respectively. 5. Mass concentrations of each Mn, Fe, Cd and Si in fine particles were significantly correlated with both cities. In normal weather condition, Mn, Cu and Si concentrations are statistically significant in Asan, while Mn, Fe, Cu and Si concentrations are statistically significant in Seoul. Mn, Fe and Si concentrations in both cities were statistically significant during yellow-sand weather.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2089-2099
• /
• 2015

This study examined the relationships between the blood heavy metal (Pb, Hg and Cd) concentration and exposure-related factors. The subjects were 2,042 (male: 953, female: 1,089) who were recruited through a National Health and Nutrition Examination Survey. Differences in the concentrations of mercury were observed in males, whereas females showed differences in lead and cadmium. Analyses of the blood concentrations according to body mass index and waist circumference showed significantly higher concentrations of mercury. In males, high-density lipoprotein cholesterol of dyslipidemia was higher than normal in the blood lead concentration. In females, low-density lipoprotein cholesterol of dyslipidemia was higher than normal in the blood lead concentration. The blood lead and cadmium concentrations of male smokers was higher than non-smokers, and cadmium showed the same results in females. The blood lead levels were higher in male alcohol consumers than non-drinkers. The blood concentrations of mercury and cadmium showed significant differences according to household income. Blood concentrations of heavy metals were closely related to exposure-related factors, and age, smoking, drinking alcohols, obesity, hyperlipidemia, and household income were found to be relevant.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.2
• /
• pp.15-22
• /
• 2004

Yellow loess, Tidal plat sediment, and mud are blown to be high in adsorption though they have great distinction according to the ratio of clay minerals content and their kinds. Thus one of the samples for this study can be obtained by drying of Yellow loess, Tidal plat sediment, and the mud which is semifinished products that are from the progress of heat treatment and making homogeneity which can be found everywhere in our county. Another sample can be prepared by reducing pollutants with the adsorbent and by homing heavy metals of their on. With the samples, noxious heavy metals such as Pb, Cd, and essential trace elements such as Cu, Fe, Mn by each concentration is tested for adsorption according to pH, the kinds of adsorbents and the amount of injection. With the help of these steps, this study shows that the adsorbents, which are green, reducing the additional pollution and low in price, can be found. It also shows that the optimal condition for removing pollutants can be found and the basic materials for treating water can be offered. The results were as follows ; Yellow loess shows the rates of adsorption by more than 50% and Tidal plat sediment and Mud show it by more than 90%. Thus Tidal plat sediment and Mud are higher than Yellow loess the rates of adsorption. The pH should be treated in natural condition because the rates of adsorption of Pb, Cd, Cu, Mn excepting Fe in mud is higher in pH 7 than in pH 3 of Yellow loess, Tidal plat sediment, and Mud. The drying adsorbents are good to use because the rates of adsorption of heavy metals has tendency to be higher in the drying method than in the burning method. It is considered that the more the mont of the injection of the adsorbent is , the higher the rates of adsorption is, and one gram is reasonable for the amount of the injection of Tidal plat sediment and mud. Yellow loess is suitable for the treatment of the water that includes low concentration of heavy metals because it has the lower rate of adsorption as the concentration of noxious heavy metals is higher. It is thought that Tidal plat sediment and Mud is proper for the treatment of the water that includes high concentration of heavy metals because the rates of adsorption has not been changed as the concentration of heavy metals increases.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.155-159
• /
• 2005

In this report, Polymer light emitting diodes (PLEDs) with an ITO/PEDOT:PSS/MEH-PPV/Al structure were prepared by spin coating method on the glass substrate patterned ITO (indium tin oxide), using PEDOT:PSS(poly(3,4=ethylenedioxythiophene):poly(styrene sulfolnate)) as the hole transfer material and MEH-PPV(poly(2-methoxy-5-(2-ethyhexoxy)-1,4-phenylenvinylene)) having a different concentration (0.1, 0.3, 0.5, 0.7, 0.9, 1.5 wt$\%$) as the emitting material. The electrical and optical properties of the prepared PLED samples were investigated. The good electrical and optical properties were observed for the PLED samples with a MEH-PPV concentration ranging from 0.5 to $0.9 wt\%$. However, the current and luminance values for PLED sample with $1.5 wt\%$ of MEH-PPV decreased greatly. The maximum luminance and light efficiency for the PLEDs with concentration of $0.5 wt\%$ MEH-PPV were $409 cd/m^2$ and 4.90 Im/W at 9 V, respectively. The emission spectrums were found to be $560{\~}585 nm$ in wavelength showing orange color.

• Korean Journal of Environmental Biology
• /
• v.26 no.4
• /
• pp.303-310
• /
• 2008

Heavy metal concentration of Fe, Zn, Cu, Cd and Pb were analysed from seaweeds (Ulva pertusa, Sargassum thunbergii, Caulacanthus okamurae), sediments and seawater at the two experimental sites of Daebul and Sabjin industrial complex in Mokpo coastal area with a control site (Heugsando). Highest values of heavy metals were found at two experimental sites influencing by various pollution sources such as industrial drains, sewage and harbours. In contrast, the lowest concentrations was observed at the control site without any pollution source. The concentration levels of accumulated heavy metals were in the following order: seaweeds > sediments > seawater. Similar spatial distribution patterns were observed at the seaweeds, sediments and seawater for the highest mean values of the different heavy metals. This result show that seaweeds could be used as a biomonitors of heavy metals at coastal region.

• Journal of the Korean Society of Industry Convergence
• /
• v.1 no.1
• /
• pp.51-58
• /
• 1998

This study was carried out to investigate the leaching characteristics by the landfill of solidified sludge. pH of leachate was 3.7 - 5.8 and 8.0 - 10.4 in each column using sand as a top-soil layer on filled municipal waste and solidified cake. $NH_3$-N in leachate was increasing in the each column using sand as a top-soil layer on filled dewatered sludge and solidified cake, but decreasing in the each column using sand and solidified cake by top-soil layer on filled municipal waste. Also the concentration of $NO_3$-N was on the way of stabilizing but was difficult to find any tendency until now. Zn and Mn in leachates were the highest in the column filled with the solidified sludge, Cr, Pb and Cd were low concentration at each column.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.51-55
• /
• 2001

The pollution characteristics of water quality analysis and the heavy metal analysis of river sediment in the Western Nakdong river, and then a commercial tile using the polluted sediment was produced. The analytical results of the riverbed structure and the depth distribution in the Western Nakdong river were that Macdo Stream(site 2) was the deepest(13 ft). The analytical result of water quality showed that BOD was the highest in the Hogei Stream(site 6); COD, Syanduengchi Island(site 1);SS, Macdo Stream(site 2);T-N, Suanduengchi Island(site 1);T-P, Macdo Stream(site 2). Therefore the deeper the site was the higher the pollution concentration was. The result of heavy metal analysis of the river sediment was that Pb and Cr were the highest in Kangdong Bridge(site 9); Cd, Macdo Stream(site 2), so the deeper the site was the higher the pollution concentration was. The production of tile using the mixure of the polluted sediment and the raw material was successful, so the reuse of polluted sediment was possible.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.714-719
• /
• 2004

Controlling the cure depth of the Fa1260T photopolymer enhances the quality of a microstructure and minimizes its size in microstereolithography. In this work, variation of cure depth of the Fa1260T photopolymer is investigated while the concentration of a photopolymerization inhibitor as a radical quencher was varied. The energy source inducing photopolymerization was a He-Cd laser and a motorized stage controled the laser beam path accurately. The effects of process variables such as laser beam power and scan speed on the cure depth were examined. Optimum conditions for the minimum cure depth were determined as laser power of 230 W and scan speed of 40-50 m/s at the concentration of the radical quencher of 5％. The minimum cure depth at the optimal condition was 14 m. The feasibility of the fabrication of microstructures such as a microcup, microfunnel, and microgrid of 100 m size is demonstrated using Super IH process.

• Journal of Environmental Science International
• /
• v.5 no.2
• /
• pp.195-201
• /
• 1996

This study was conducted for the efficient utilization of a scoria, which is abundantly found in Cheju island, as adsorbent and the scoria was examined for its performance in clarification of adsorption of heavy metal ions. The order in heavy metal ions adsorbed on scoria was; Pb+>Cd^{2+}$>Cu^{2+}$>Ag^+$>Co^{2+}$>Zn^{2+}$>Cr^{3+}$>Cr^{6+}$. This tendency was relatively consistent with the decreasing order of radius of hydrated metal ion. Also, the smaller scoria size and the larger amounts of scoria showed higher removal efficiency for heavy metal ions. The same scoria size showed more effective removal efficiency for heavy metal ions at lower initial concentration than at higher initial concentration. The adsorption abilities of original scoria and chemically treated scoria were compared. Adsorption isotherm of scoria was generally obeyed to Freundlich formula than langmuir formula and Freundlich constant, than was obtained in the range of 0.2~0.4.

• Journal of Environmental Science International
• /
• v.5 no.6
• /
• pp.801-812
• /
• 1996

We investigated concentrations of heavy metals(Cr, Cd, Zn, Fe, Pb, Cu, and Mnl and correlations between concentrations of heavy metals in the sediment, soil, weeds, and vegetables on the lower Nakdong river. Concentrations of heavy metals on the lower Milyang river was generally lower than those of other sampling area. In the soil, concentration of Pb is generally larger than that of other heavy metals. Generally, concentrations of heavy metals in the sediment show decreasing tendency 8s the sampling area moves toward downstream of the river, but those of in the soil and weeds show increasing tendency. There is no significant correlation between concentration of heavy metals in the soil-sediment, soil-vegetables, sediment-weeds, or vegetables-weeds. Only concentrations of Pb in the vegetables and those of in the weeds show very high correlation.