• The Journal of Korean Medicine
• /
• v.23 no.1
• /
• pp.67-82
• /
• 2002

Objectives: In recent years, extensive focus has been laid on adulteration of herbal medicine with heavy metals. This may be mainly due to soil contamination by environmental pollution. The objective of this study is to identify the contents of various heavy metals in the blood from Ohjeok-san (Wuji-san) Decoction (OD) treated-rats. Methods: For this study, 13 kinds of metals including essential and heavy metals, i.e. A1, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se and Zn were analyzed by a slight modification of EP A methods and the following results are obtained. Results: 1. There was no significant difference between the OD-treated groups and control group in liver, kidney, bone, brain and weight, especially no significant difference at the 5th and 10th days in weight and the amount of food intake. 2. The amount of each metal analyzed in the blood were as follows; A1: 2.3~3.07 mg/l, As: 2.90~3.66 mg/l, Cd: 0~0.001 mg/l, Co: 0~0.01 mg/l, Cr: 0.40~043 mg/l, Cu: 0.93~1.88 mg/l, Fe: 414.35~464.46 mg/l, Hg: 0.01 mg/l, Mn: 0.10~0.17 mg/l, Ni: 0.01 mg/l, Pb: 0.03~012 mg/l, Se: 0.73 mg/l, Zn: 3.41~4.13 mg/l by groups, respectively. In control and experimental group, Experimental I and other experimental II, III, IV, and V groups, there were no significant differences. 3. The amount of non-toxic metals (A1, Co, Cu, Fe, Mn, Se, Zn) were $64.1{\pm}7.71{\;}mg/l$ in the control group and 60.70~67.58 mg/l in the experimental groups I, II, III, IV and V. The amount of Toxic metals (As, Cd, Cr, Ag, Pb) were $0.68{\pm}0.21{\;}mg/l$ in the control group and 0.57 ~ 0.66mg/l in the experimental groups. The total amount of metals were 32.35 mg/l in the control group and 30.48~34.12 mg/l in the test groups I, II, III, IV and V, respectively. Conclusions: There was no significant difference of metal concentration in the blood from the OD-treated-rats compared to those of the control group even if higher dosage (1~8 times the dosage for a person) of OD was administered. This may be mainly due to a decoction treatment which contains only supernatants filtered from the herb-mass after boiling. This indicates the legal limitation for metal concentration in herbal medicine must be applied according to different treatment methods of herbal medicine.

• Journal of Food Hygiene and Safety
• /
• v.37 no.6
• /
• pp.394-399
• /
• 2022

This study was conducted to estimate hazardous heavy metal content, including lead (Pb), cadmium (Cd), arsenic (As) and mercury (Hg) in 120 collagen products currently marketed in Korea. Hg concentration was analyzed by a gold amalgamation method using a mercury analyzer, while concentrations of Pb, Cd, and As were analyzed by ICP-OES. The average Pb concentration was 0.097 mg/kg. For comparison, respective average concentrations were 0.108 mg/kg, 0.084 mg/kg, 0.131 mg/kg, and 0.149 mg/kg in functional health foods, other processed products, beverages, and fruit/vegetable processed products. The average concentration of Cd was 0.026 mg/kg. All products in which Cd was detected were functional health foods. The average concentration of As was 0.097 mg/kg, with respective average concentrations of 0.091 mg/kg, 0.133 mg/kg, and 0.086 mg/kg in functional health foods, other processed products, and fruit/vegetable processed products. The average Hg concentration was 0.0025 mg/kg, with respective average concentrations of 0.0012 mg/kg, 0.0028 mg/kg, 0.0013 mg/kg, and 0.0031 mg/kg in functional health foods, other processed products, fruit/vegetable processed products, and candies respectively. Heavy metal levels in beverages and candy products with set heavy metal standards were below the set standards. Even products without regulatory standards were found to be relatively safe compared with heavy metal standards set for domestic and foreign foods.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.1
• /
• pp.113-131
• /
• 1997

This study was performed to evaluate the exposure levels of worker exposed to welding fume and metals in confined spaces of a shipyard. The airborne concentration of welding fumes and metal elements in confined spaces were compared with those in open working areas. Results of the study were as follows. 1. The geometric mean of welding fume concentration in a confined space was $16.6mg/m^3$, which contained $3.9mg/m^3$ Fe, $1.2mg/m^3$ Mg, $0.8mg/m^3$ Zn, $0.008mg/m^3$ Cu, $0.008mg/m^3$ Pb, $0.005mg/m^3$ Ni, $0.003mg/m^3$ Cr, $0.003mg/m^3$ Cd. The geometric mean of welding fume concentration in open working areas was $5.2mg/m^3$, which contained $1.1mg/m^3$ Fe, $0.3mg/m^3$ Mg, $0.3mg/m^3$ Zn, $0.004mg/m^3$ Cu, $0.008mg/m^3$ Pb, $0.005mg/m^3$ Ni, $0.003mg/m^3$ Cr, $0.0003mg/m^3$ Cd. The geometric mean of welding fume concentration in confined spaces was 3,2 times higher than that in open working areas. The geometric mean concentrations of such metals as Fe, Mg, Zn, or Cu within fume in confined spaces were 2-4 times higher than those in open working areas, while little difference made such metals as Pb, Ni, Cr, Cd. 2. In 32 samples out of a total of 39 samples (82.1%) collected in confined spaces, the concentrations of welding fume exceeded TLV. while so did 19 samples out of 33 samples (57.6%) in open working areas. As for the concentrations of metals in welding flume from confined spaces, Fe exceeded TLV in 14 out of a total of 38 samples (36.8%), Mn exceeded TLV in 23 out of a total of 38 samples (60.5%). As for the concentration of metals in welding fume from open working areas, Fe exceeded TLV in 3 out of a total of 34 samples (8.8%), Mn exceeded TLV in 6 out of a total of 34 samples (17.6%). Considering additive effect among metals, in 31 out of a total of 39 samples (79.5%) collected in confined spaces, the concentrations of welding fume exceeded TLV, while so did 14 out of 38 samples (55.6%) in open working areas. 3. In respect of base metal and welding type the concentration of total welding fume by $CO_2$ gas W./mild steel was the highest, followed by semiauto MMA/mild steel, then followed by TIG or $CO_2$ gas W./stainless steel. ; as for concentration of metal within fume, a decreasing order was Fe, Zn, Mn, and Pb in $CO_2$ gas W./mild steel and semiauto MMA/mild steel, but Fe, Mn, Cr, and Ni in TIG or $CO_2$ gas W./stainless steel. 4. In case of welding base metal covered by paint, contents of Zn within red paint chip and within gray paint chip were 14.0% and 0.08% respectively, which showed a little difference, while the airborne concentrations of Zn within fume during welding base metal covered red paint and gray paint were $1.351mg/m^3$ and $1.018mg/m^3$ respectively, which showed little difference. As for Pb, contents of red paint chip and gray paint chip were 0.14% and 0.08% respectively, and the airborne concentrations within fume during welding base metal covered red paint and gray paint were $0.009mg/m^3$ and $0.007mg/m^3$ respectively, both of which showed little difference.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.59-69
• /
• 1992

In order to predict the distribution of chemical species of copper and cadmium in water, conditional stability constant and complexation capacity between copper or cadmium and natural aquatic sediment have been determined in a shallow lake in Haman, Kyungnam. Kinetic parameters were calculated by Langmuir isotherm equation. Conditional stability constant was log $K_{cuSed}=4.78 and log K_{cdSed}=4.45$. Complexation capacity was $1.70{\times}10^{-4}$moles/g for copper and $5.54{\times}10^{-5}$moles/g for cadmium. Accuracy of experimental values of conditional stability constant was checked by comparing the calculated concentration of the metals with the measured one. Relatively good agreement between these values was obtained. Relative errors were 8.9% for copper and 6.5% for cadmium. Data of the measured conditional stability constant were put into data base of MINEQL computer program, and concentration of various chemical species of copper and cadmium in a model aquatic system was calculated. Aquatic sediment was associated with copper at the concentration of $10^{-5M}(0.059g/\ell)$10-5M(0.059g/l) and with cadmium at the concentration of $10^{-6M}(0.018g/\ell)$, and it significantly influenced on the distribution of chemical species of the metals. This result showed that prediction of chemical species of the heavy metals in an aquatic system should be taken into account the influence of the sediment.

• Journal of Life Science
• /
• v.13 no.5
• /
• pp.751-755
• /
• 2003

Cyclic AMP receptor proteins(CRP) activate many genes in Escherichia coli by binding of cAMP with not fully known mechanism. CRP existed as apo-CRP in the absence of cAMP, $CRP;(cAMP)_2$$_2$ at low(micromolar) cAMP concentration, or $CRP;(cAMP)_4$ at high(millimolar) concentration of cAMP. This study is designed to measure the thermal stability of S83G CRP, which substituted glycine for serine at amino acid 83 position, with CD spectrapolarimeter at 222nm by the constant elevation of temperature from $20^{\circ]C\; to\; 90^{\circ}C\; at\; 1^{\circ}C/min$. The non-linear regression analysis showed that melting temperatures were 68.4, 72.0, and $82.3^{\circ}C$ for no cAMP, 0.1mM cAMP, and 5mM cAMP, respectively. Result showed the strong thermal stability of CRP by binding of additional cAMP molecules to region between the hinge region and helix-turn-helix(HTH) motif at 5mM cAMP concentration.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.377-381
• /
• 2004

Chiral separation of aryalcohols such as 1-phenyl-propanol, 1-phenyl-2-proanol, and 2-phenyl-1-propanol by capillary electrophoresis has been optimized using the overlapping resolution mapping (ORM) scheme. Three critical parameters of the electrophoretic media, i.e. phosphate concentration, sulfated ${\beta}$-cyclodextrin (CD) concentration and pH, were chosen for optimization. The working ranges were initially presumed by 7 preexperiments. Further optimization was carried out by another seven experiments within the narrow working ranges. From the final overlapping resolution mapping all peak pairs, the area of maximum separations were located. Using the conditions of a point in this area, we found that the target compounds were a baseline separated within 30 min. The maximum separation conditions of arylalcohols were a chiral selector concentration of 5.4%, a phosphate concentration of 28 mM, and a pH of 5.0.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.11
• /
• pp.1045-1052
• /
• 1996

The effects of G-T mismatches on thermal stability, the base-pair lifetime and the global structure of a d(GCGTGCGC)2 duplex were studied by using 1H NMR, UV and CD spectroscopy. The existence of G-T mismatches was found to cause a noticeable change in the chemical environment of imino protons associated with significant decrease in the base-pair lifetime at the mismatched site as well as in thermal stability of the duplex itself. The melting transition of d(GCGTGCGC)2 was not cooperative at all at 100 mM or lower concentration of NaCl, but became cooperative at 500 mM or higher NaCl concentration. The melting temperature (Tm) of this duplex was 32℃ at 500 mM concentration of NaCl, which is much lower than that of d(GCGCGCGC)2 at the same NaCl concentration. This suggests that the decrease in stability may be ascribed to the decrease in the base-pair lifetime and the deviation from the normal structure due to the G-T mismatches. Adding berenil to d(GCGTGCGC)2 caused no observable change in the global structure but the large decrease in the base-pair lifetime and the stability of the duplex.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.387-393
• /
• 2017

The dynamic interactions between benzoic acid derivative ($pH{\approx}7.0$)(guest) and ${\beta}$-cyclodextrin (${\beta}$-CD)(host) were investigated in an aqueous solutions in terms of ultrasonic absorption in the frequency range 0.2 MHz ~ 50 MHz with emphasis on the low-frequency range below 1 MHz at $25^{\circ}C$. We show that the interaction of ${\beta}$-CD and benzoic acid derivative complies with a typical spectrum of a single relaxation process around a few MHz. The ultrasonic relaxation observed in these solutions was due to a perturbation of a chemical equilibrium related to a reaction of an inclusion complex formed by the host and guest. The rate constant ($k_b=7.48{\times}10^6M^{-1}s^{-1}$) and equilibrium constant ($K=68.6M^{-1}$) were determined from the concentration dependences of benzoic acid on the relaxation frequency. The standard volume change (${\Delta}V=10.6{\times}10^{-6}m^3mol^{-1}$) of the reaction was also computed from the maximum absorption per wavelength. It was found that the hydrophobicity of guest molecules played an important role in the formation of the inclusion complex.

• KSBB Journal
• /
• v.16 no.1
• /
• pp.54-60
• /
• 2001

The activity of microorganisms is an important factor that determines the efficiency of the bacterial recovery of precious metals from low-grade ore. Metal-leaching microorganisms must have a tolerance, within the concentration levels encountered to leached metals. In this study, the tolerance levels of Thiobacillus ferroxidans to the single and mixed metal ions systems, composed of $Zn^{2+}$, $Cu^{2+}$, $Ni^{2+}$, and $Cd^{2+}$ were investigated. When single metal ions of $Zn^{2+}$ (10~60 g/L), $Cu^{2+}$ (1~6 g/L), $Ni^{2+}$ (1~6 g/L), or $Cd^{2+}$ (1~6 g/L) were added to the growth medium of T. ferrooxidans, the iron oxidation rate of this bacterium was not significantly inhibited. The maximum inhibition percentage observed on the iron oxidation rate of T. ferrooxidans was approximately 50% in the medium supplemented with two or three mixed metal ions of $Cu^{2+}$, $Ni^{2+}$, and $Cd^{2+}$. However, when $Zn^{2+}$ was also added to the medium with the other metal ions, the inhibitory effect on the iron oxidation activity of T. ferroxidans was remarkably increased.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.1
• /
• pp.8-18
• /
• 2018

Background: This present study was conducted to evaluate the anti-inflammatory and immune regulatory effects of Aucklandia lappa Decne (AL). Methods and Results: We measured cytotoxicity, nitric oxide (NO) content, mRNA expression (iNOS, IL-1${\alpha}$, IL-$1{\beta}$, and TNF-${\alpha}$), protein expression (iNOS, COX-2, and $I{\kappa}B$) and phagocytic activity in RAW264.7 cells. Male BALB/c mice were fed 100 mg/kg AL (Aucklandia lappa Decneon 70% ethanol extract) and 250 mg/kg AL for 4 weeks; thereafter, we observed B/T or $CD4^+/CD8^+$ lymphocyte subpopulation change, and expression patterns of $CD4^+$ and $CD8^+$ lymphocytes by immunohistochemical staining in mouse splenocytes and/or thymocytes. To determine the experimental concentration of AL, cell viability was measured by MTT assay and tested at $12.5{\mu}g/m{\ell}$ or less. AL inhibited the levels of NO, lymphokine production (IL-$1{\beta}$, and TNF-${\alpha}$), and mRNA (iNOS, IL-1${\alpha}$, IL-$1{\beta}$, and TNF-${\alpha}$) and protein (iNOS, and COX-2) expression. Additionally, the levels of $I{\kappa}B$, phagocytic activity, and splenic and thymic T lymphocytes, especially $T_H$ and $T_C$ cells were significantly increased in AL administered mice. The immuno-reactive density of $CD4^+$ and $CD8^+$ lymphocytes was stronger in AL groups than in the normal group. AL stimulated NO, iNOS, and COX-2, and regulated IL-1${\alpha}$, IL-$1{\beta}$, TNF-${\alpha}$, and $I{\kappa}B$ in macrophages treated with LPS (lipopolysaccharide). In addition, AL increased the phagocytic activity of macrophages and the immunity of mouse T ($T_H$, and $T_C$) cells. Conclusions: These results suggested that AL might show anti-inflammatory activity via the suppression of various inflammatory markers and immuno-regulatory activity.