• 공업화학
• /
• 제8권1호
• /
• pp.67-75
• /
• 1997

LLDPE와 미분말 상태인 강산성 양이온 교환 수지를 사용하여 압출기를 통해 막상으로 성형한 후 증류수와 NaCl 포화 수용액상에서 후처리하여 불균질 양이온 교환막을 제조하고 특성화하였다. 증류수 및 NaCl 포화 수용액 중에서 후처리를 통하여 양이온 교환 수지 입자가 함수, 팽윤되어 폴리에틸렌과 이온 교환 수지 사이에 cavity가 발생하며 동시에 양이온 교환 수지의 팽윤 압력에 의해 결합제에 큰 힘이 작용하기 때문에 폴리에틸렌에 micro-crack이 생성되므로 전기 화학적, 물리적 특성 값이 향상되었다. 또한 후처리 시간 30분과 후처리 온도 $90^{\circ}C$에서 최적의 조건을 갖는 우수한 불균질 양이온 교환막이 제조되었다.

• 한국지진공학회논문집
• /
• 제7권3호
• /
• pp.17-22
• /
• 2003

본 연구에서는 나노기술을 이용하여 에너지 감쇠 기능을 활용한 감쇠기 개발에 대한 연구를 하였다. 유체 감쇠기를 대체하는 완충역할을 하는 미로구조를 가지는 실리카 겔 입자를 사용하였으며, 입자에 관련한 작동 유체로는 물을 사용하여 그 효과를 검증하였다. 콜로이드 감쇠기를 구현하기 인해서는 형성된 실리카 겔 입자의 표면을 유기 실리콘 매질을 이용한 소수화 코팅 처리를 하였다. 정적 하중 상태에서의 가역적 콜로이드 감쇠기에 대한 실험을 수행하였다. 콜로이드 감쇠기내 다공질 입자의 나노 유로(pore)와 다공성 입자의 직경, 다공성 입자의 구조, 그리고 대기압 상태에서 유체의 출입을 통제하기 위한 코팅처리의 분자 간 길이와 같이 여러 가지 요인의 콜로이드 감쇠기 이력현상에 대한 영향을 평가하였다. 감쇠기의 소산 에너지양과 효율에 대해서도 조사하여 유압 감쇠기 보다 뛰어난 결과를 얻었으며 콜로이드 감쇠기로 사용 가능하다는 사실을 입증하였다.

• 한방안이비인후피부과학회지
• /
• 제23권3호
• /
• pp.1-10
• /
• 2010

Objective : Erysipelas is an acute inflammation caused by pyogenic bacteria. This mainly involves the upper part of dermis. It begins as erythematous patches with tenderness, followed by fever, headache, chills and fatigue etc. It may results in edema, obstruction of lymphatics and sepsis. So this experiment is carried out for test whether the Bojeasodok-um subtracted Scrophulariae Radix, Lasiosphaera seu Calvatia, Isatidis Radix added indigo Naturalis, Lithospermi Radix have an anti-inflammatory effect and have suppression effect on immunocyte in the state of inflammation which induced by Erysipelas. Method : Experimental animals made use of 4-5 week-age(weight 20-25g) ICR(male) mouse. In the breeding farm, the lighting time was controlled from 7:00 am till 7:00 pm, the temperature was controlled So we concluded that BS is prospected as an anti-inflammatory agent to cure inflammation induced bywithin 18-23$23^{\circ}C$ and water and food were not limited.The freezing lyophilization powder which were extracted from Bojesodok-Um divided low dose group(200mg/kg-BSL) and high dose group(500mg/kg-BSH) and after melting in water, it was orally administered to the mouse. Compared with inflammation induced group which were induced by triggering-inflammation reagent Carageenan and Zymosan and normal contrast group, we measured the edema decrement effect,macrophage and spleen cell activation. Result : 1. BS has suppress inflammatory reaction induced by Carageenan. 2. BS has suppress increasing activation of abdominal cavity macrophage in the Carageenan and Zymosan induced inflammation. 3. BS has suppress increasing activation of spleen cell in the Carageenan and Zymosan induced inflammation. Based on the above result, BS was improved its suppression effect to the inflammatory reaction through the suppression of spleen cell and macrophage activation. So we concluded that BS is prospected as an anti-inflammatory agent to cure inflammation induced by Erysipelas.

• 기본간호학회지
• /
• 제6권3호
• /
• pp.452-463
• /
• 1999

This study was performed to inquire into recognition of cold and heat application. The subjects in the study were 429 adults who were collected by disproportional quota sampling according to age, sex. The instrument was 36 questions that constitured closed questions and semiopened questions that encluded general characteristics, recognition of cold and heat applications. and what will you do when requested cold and heat applications on abdomial and perineal areas. Data were collected from september 25 to October 25, 1998. Data was analysed by SPSS/win, into frequency, Pearson correlation, t-test, ANOVA. The results were following. 1) The subjects consisted of male and female who was from teenage to fifty year old above. According to general characteristics, who endureed moderate cold-heat application, had constitutional fever, good sweat, and taked a cold bath accationally. And the woman think that their body were more cold than man. and the number of cold bath was less than man. Woman felt more harder than man that endured exposing cold. According to the recognitions of cold-heat applications, the 61.9% of the subjects think that cold application is more positive, and the 61.7% of the subjects think that heat application is more positive. 2) The subjects think that oral cavity, abdomen, back, extremes must be warm. 3) The percents of cold or heat application at abdomen were 77.4%, 86.5% respectely and the percents of cold or heat application at perineum were 56.9%. 93.6% respectely. With the above results. we know that the subjects have the fixed perceptions that each body part has to maintain its temperature. especially, they think that postpartum care is correlated with cold-heat application. So when we intervent nursing care, we also must regard their recognitions of cold and heat applications. and we need to educate and explain correctly about cold-heat application.

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.336-354
• /
• 1998

Traditionally, many kinds of mechanical bonding techniques were used for bonding resins to the surface of the metal alloys. If there is a seperation between resin and metal junction by stress accumulation and temperature change of oral cavity, the cracks or crazing may occur, accompanied by failure of resin bonding to metal. This study was designed to compare the shear bond strength of the type IV gold alloy and Cr-Co alloy surfaces treated with various methods and thermocycling. Universal Instron (Model 1000) and scanning electron microscope (JEOL, Japan) was used to record the shear bond strength of 5 groups. Forty specimens were made for each group ; group 1 was treated with sandblasting only, group 2 was coated with V-primer after sandblasting, group 3 was coated with Metal primer, group 4 wase coated with MR Bond and group 5 was coated with silane. After treated with various methods, thermocycling was done for half of the each group. The surfaces of failed pattern were observed with SEM. The results were as follows : 1. Shear bond strength of the group 1 was lower than that of another groups in type IV gold alloys and bond strength of the group 1, 2 were lower than that of group 3, 4, 5 in Cr-Co alloys. 2. Shear bond strength of the gold alloy with resin was higher than that of Cr-Co alloy when specimens were coated with V-primer. 3. Shear bond strength of the Co-Cr alloys with resin was higher than that of gold alloys when specimens were coated with Metal primer. 4. The bond strength of all specimens did not decreased significantly after thermocycling. 5. Adhesive failures were found in group 1 and Cr-Co alloy in group 2, but adhesive and cohesive failures were found in another groups.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1465-1477
• /
• 1993

본 연구에서는 분말혼합체의 특성인 항복응력을 포함한 Generalized Newtonian Fluid의 구성 방정식을 도입하고 미끄럼현상을 고려한 신소재의 사출성형 충전과정 해석용 CAE(computer aided engineering)시스템을 개발하였다. 수치모사를 위한 수치해석방법으로는, 유한요소법(finite element method)과 유한차분법(finite difference method)을 함께 사용하였다. 유한요소법과 검사체적법(control volume technique) 을 병용하여 유동의 진행을 수치모사 하였으며, 유한차분법을 사용하여 온도분포를 계산하였다.

• 한국분말재료학회지
• /
• 제21권3호
• /
• pp.215-221
• /
• 2014

Translucent alumina is a potential candidate for high temperature application as a replacement of the glass or polymer. Recently, due to the increasing demand of high power light emitting diode (LED), there is a growing interest in the translucent alumina. Since the translucent property is very sensitive to the internal defect, such as voids inside or abnormal grain growth of sintered alumina, it is important to fabricate the defect-free product through the fabrication process. Powder injection molding (PIM) has been commonly applied for the fabrication of complex shaped products. Among the many parameters of PIM, the flowability of powder/binder mixture becomes more significant especially for the shape of the cavity with thin thickness. Two different positions of the gate were applied during PIM using the disc type of die. The binder was removed by solvent extraction method and the brown compact was sintered at $1750^{\circ}C$ for 3 hours in a vacuum. The flowability was also simulated using moldflow (MPI 6.0) with two different types of gate. The effect of the flowability of powder/binder mixture on the microstructure of the sintered specimen was studied with the analysis of the simulation result.

• 원예과학기술지
• /
• 제32권5호
• /
• pp.607-613
• /
• 2014

Calcium has been associated with improved cold tolerance in many crops. The aim of this study was to investigate the changes in leaf cell $Ca^{2+}$ distribution and cell organelle ultrastructure of loquat (Eriobotrya japonica Lindl.) plants in response to cold stress at $-3^{\circ}C$, using transmission electron microscopy (TEM). Two loquat accessions, Zaozhong 6 (a commercial cultivar) and oakleaf loquat (a wild relative) were used. Cold tolerance, as measured by leaf browning rate, was higher in oakleaf plants, and calcium treatment improved cold tolerance in both species. Cold stress first induced inward transport of $Ca^{2+}$ from the intracellular space. Then, the imported $Ca^{2+}$ was aggregated around the chloroplast membrane, finally entering the chloroplast. This pattern of $Ca^{2+}$ distribution in leaf cells occurred earlier in Zaozhong 6 than in the wild loquat. With increasing time of cold exposure, the chloroplast membranes of Zaozhong 6 leaves were damaged, blurred and even disappeared, while those of wild oakleaf loquat leaves maintained their structure longer. In Zaozhong 6, cold stress induced a clear cavity between poorly structured granal thylakoids and vesicles appearing inside the chloroplast, while in oakleaf leaves cold stress had little effect on the ultrastructure of chloroplasts (although chloroplast membranes looked blurred). Loquat leaves accumulated free calcium ions around chloroplasts in response to cold stress, with earlier calcium accumulation occurring in the cold-sensitive cultivar Zaozhong 6 than in wild oakleaf loquat. These results demonstrate that these two loquat species have differences in both cold tolerance and calcium accumulation dynamics.

• 한국통신학회논문지
• /
• 제40권7호
• /
• pp.1347-1353
• /
• 2015

$0.13-{\mu}m$ CMOS 공정기술을 이용하여 10 Gb/s 4채널 수직공진 표면 광레이저 (VCSEL) 드라이버 어레이를 구현하였다. 높은 전류 해상도, 전력 소모 및 칩 면적의 향상을 위해 시분할 센싱기법을 사용한 디지털 APC/AMC가 최초로 채택되었다. 측정된 -3 dB 주파수 대역폭은 9.2 GHz이고, 소신호 이득은 10.5 dB, 그리고 전류 해상도는 폭넓은 온도 범위에 대해 10 Gb/s 까지 안정한 파장동작을 위한 1 mA/step이다. 제안된 APC/AMC는 5 ~ 20 mA 의 바이어스 전류 제어 및 5 ~ 20 mA 의 변조전류제어를 입증하였다. 4 채널 칩 소모전력은 최대 바이어스 및 변조전류 하에서 371 mW, 칩 사이즈는 $3.71{\times}1.3mm^2$이다.

• 한국전자파학회논문지
• /
• 제14권4호
• /
• pp.393-400
• /
• 2003

본 논문에서는 EQM(Engineering Qualification Model)급 Ku 대역 위성 중계기용 입력 멀티플렉서 설계 및 결과에 대하여 언급하였다. 각 채널은 Circulator Chain구조를 이용하여 분리되었으며, 채널 대역내에서의 진폭 변화와 군지연 변화를 최소화하기 위하여 각각의 채널은 채널필터 외부에 등화기를 사용하였다. 위성중계기의 무게와 부피를 최소화하기 위하여 채널필터와 등화기 모두 이중모드로 설계하였다. 채널별 주파수 선택도를 높이기 위하여 채널 필터는 8차 타원 응답형으로 설계하였으며, 등화기는 2차 반사형으로 설계하였다. 온도 변화에 따른 특성 변화를 최소화하기 위하여 필터와 등화기의 공동(cavity), 슬롯, 튜닝나사는 INVAR36을 사용하여 제작하였다. 제작한 입력 멀티플렉서는 진동 시험, 열진공 시험, EMC 시험을 실시하였으며 시험결과 Ku 대역 위성 중계기에 적용 가능한 성능을 나타내었다.