• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.579-580
• /
• 2006

In this study, an injection mold of tensile test specimen was manufactured by international standard. Pressure and temperature in the cavity of the injection mold was measured by sensors. Simulation of injection molding process was performed with the same condition of experiment and linear structural tensile analysis was also performed with the initial condition of the residual stress induced by injection molding analysis. Normalized elastic coefficient of tensile test was compared with that of structural analysis. It was shown that the residual stress induced by injection molding has an effect on both the experiment of tensile test and linear structural analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.627-632
• /
• 2002

The paper considers acoustic analysis of the shock absorbing muffler within a rotary compressor. The internal space of the compressor is modelled as a combination of cavities and pipes. A simple one-dimensional impedance approach is used fur the acoustic analysis in the low frequency range, with ignoring the effects of gas flow and temperature gradients that are closely related to power efficiency of the compressor. Using the similarity between the vibration isolator and the shock absorbing muffler, the source strength transmissibility is newly proposed as a performance measure of the muffler and its validity is supported by power analysis. Some Important muffler design rules obtained are; (1) a muffler cavity and its opening throat should be used as a pair, (2) a long thin throat is desirable for high frequency noise isolation, (3) a large muffler cavity should be used with care since it shortens the working frequency range of the muffler. The rules were applied to redesign a compressor muffler currently in use, and a significant improvement was achieved by simply attaching a throat to the outlet holes of the muffler.

• 소성∙가공
• /
• 제8권2호
• /
• pp.188-199
• /
• 1999

Semi-Solid Forming Process(Thixoforming, Rheocasting) is a novel forming process which has some advantages compared with conventional die casting, squeeze casting and hot/cold forging. In this study. Thixoforming process was selected as analysis processing in terms of billet handling and easiness of automation process. The Thixoforming process consists of reheating process of billet, billet handling, filling inot the die cavity and solidification of SSM part. In filling process, two rheology models which were Newtonian and Non-Nettonian model (Ostwald-deWaele)were verified with experimental results. The Ostwald-deWaele model shows the good agreement to the real flow and filling phenomena in die cavity. To give a boost the economical efficiency of Thixoforming process and to ensure the good forming result, reheating device coupled die set was proposed and the initial billet temperature for system that was found from experimental resluts. This study presents an overview of application of numerical analysis for simulation of semi-solid metal forming process to reduce the lead time for development of manufacturing part in industrial field.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.539-545
• /
• 2005

In this paper, the thermal characteristics of natural convection in a rectangular cavity with nanofluids such as water-based nanofluids containing alumina are theoretically investigated with a new model of the thermal conductivity for nanofluids presented by Jang and Choi and various models for effective viscosity. In addition, based on theoretical results, the effects of various parameters such as the volume fraction, the temperature, and the size of nanoparticles on free convective instability and heat transfer characteristics in a rectangular cavity with nanofluids are suggested.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.289-292
• /
• 2007

To prevent the damage of glass lens molds and deterioration of glass lenses using in progressive GMP process, a thermal stress and a deformation of the glass lens molds at forming temperature should be considered in the design step. In this study, as a fundamental study to develop a multi cavity mold used in an aspheric glass lens molding, a heat transfer and a thermal stress analysis were carried out for the case of one cavity glass lens mold used in progressive GMP process. Finally, using analysis results, we estimated the thermal stress in a glass lens mold and predicted a modified height of guide ring that determines the forming height of a glass lens.

• Current Optics and Photonics
• /
• 제1권5호
• /
• pp.544-550
• /
• 2017

This simulation based study reports a novel tunable, compact, room temperature terahertz (THz) transistor source, operated on the concept of charge plasma oscillation with the capability of radiating within a terahertz gap. A vertical cavity with a quasi-periodic distributed-Bragg-reflector has been attached to a THz plasma wave transistor to achieve a monochromatic coherent surface emission for single as well as multi-color operation. The resonance frequency has been tuned from 0.5 to 1.5 THz with the variable quality factor of the optical cavity from 5 to 290 and slope efficiency maximized to 11. The proposed surface emitting terahertz transistor is able to satisfy the demand for compact solid state terahertz sources in the field of teratronics. The proposed device can be integrated with Si CMOS technology and has opened the way towards the development of silicon photonics.

• 대한설비공학회지:설비저널
• /
• 제16권2호
• /
• pp.194-203
• /
• 1987

A numerical study has been conducted on the combined radiation-natural convection heat transfer characteristics in a square cavity with a selectively transparent wall. The fluid in the cavity is assumed to be transparent to the thermal radiation. The effect of the wall emissivity is mainly considered in view of the temperature and flow fields. The comparison of the radiative heat flux and conductive heat flux variations along the isothermal wall is presented as well. The results show that the Nusselt number distribution is fairly uniform due to the com-pensative interaction of the radiation and convection heat transfer.

• 한국산학기술학회논문지
• /
• 제12권4호
• /
• pp.1581-1588
• /
• 2011

사출성형은 열가소성 수지의 가공법으로 정밀도나 고품질의 제품을 효과적으로 생산하는데 널리 이용되는 기술이다. 다수 캐비티 사출성형에서 캐비티 충전 불균형이 발생하는데 이러한 현상은 사출성형품의 치수 및 중량의 편차 뿐 아니라 물리적 특성에 영향을 미치고 있다. 충전 불균형은 충전 단계에서 러너 내에서 발생되는 불균일한 전단분포에 기인하여 발생되므로 점도 변화에 영향을 주는 수지의 물성, 사출조건 등 성형공정 조건 요인에 의해 충전 불균형의 양상이 다르게 된다. 본 논문에서는 점도 및 물성이 다른 PC, PP 수지에 대하여 성형조건에 따른 충전 현상을 관찰하고 원인을 분석하였고 사출속도에 따른 충전 불균형 현상의 원인을 고찰하기 위해 사출성형실험과 CAE 해석을 수행하였다. CAE 해석을 수행하여 각 수지마다 사출속도에 따른 충전 패턴 경향과 온도분포를 예측하고 캐비티 간 충전 균형을 위해 새로운 볼륨 러너 시스템을 제시하였고 캐비티 간 충전 균형을 확인 할 수 있었다.

• 한국항공우주학회지
• /
• 제47권2호
• /
• pp.90-97
• /
• 2019

스파크제트 액츄에이터는 플라즈마 합성 제트 액츄에이터(plasma synthetic jet actuator, PSJA)라고도 불리는 능동 유동 제어 장치로, 초음속 유동의 제어 가능성이 있어 많은 연구가 진행 중이다. 이 액츄에이터는 아크 플라즈마를 이용해 캐비티(cavity) 내부에 에너지를 주입하여 온도와 압력을 상승시킨다. 온도와 압력이 상승한 캐비티에서 오리피스(orifice)를 통해 압력파와 제트가 분출되어 외부 유동에 교란을 준다. 플라즈마의 영향으로 캐비티 유동은 고온, 고압의 평형 유동이 되기 때문에 스파크제트 액츄에이터의 유동 해석을 위해선 공기의 평형 상태를 고려해야 한다. 본 연구에서는 평형 유동의 특성을 고려하여 스파크제트 액츄에이터 유동 해석을 위한 수치해석 프로그램을 개발했다. 개발된 프로그램의 검증으로 문헌에서 얻을 수 있는 실험 결과와 시간에 따른 제트의 위치를 비교했다. 또한 상온, 상압의 무풍에서 액츄에이터의 추력 특성을 분석했다.

• Design & Manufacturing
• /
• 제2권5호
• /
• pp.30-33
• /
• 2008

Injection Molding is the most effective process for mass production of plastic parts. The injection molding process is composed with several steps such as Filling, Packing, Holding, Cooling, Ejecting. Among them, filling and packing process should be considered carefully to improve accuracy of dimension, surface quality of plastic parts. Usually the quality above-mentioned is managed with weight of part after molding on the field. In this paper, a series of experiment for molding automotive front bumper was conducted with cavitity temperature sensor to optimize switch-over time(V-P switching), hot runner vale gate sequence time during filling and packing step for the purpose of uniform quality, weight at every molding. As a result, it was found that it is effective method to use temperature sensor in injection molding for quality control of plastic molding.