• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.426-430
• /
• 2008

Hot shear-welding is a process of bonding two plates together by using shearing stress in a controlled manner. This study dealt with the hot shear-welding process of two aluminum plates. These two plates were piles up in the shear-welding mold. Due to the shearing stress, these two plates were cut off longitudinally, and meantime they were welded together. During this process the control of the surplus material flow is very important, and it can be realized by designing the overlapping length and the shape of the cavity. The commercial software Deform-3D was employed to predict the effect of these two factors. The overlapping length and the shape of the cavity that presents the optimum design was then developed to get a good shear-welding process.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.139-143
• /
• 1991

GRIN-SCH quantum well structured Laser Diode were fabricated using MOCVD and operated as CW at room temperature. The threshold current density of the LD with 670${\mu}{\textrm}{m}$ cavity length was 530 A/$\textrm{cm}^2$. For the ridge waveguide type index guiding structured LD with 6${\mu}{\textrm}{m}$ stripe width and 240${\mu}{\textrm}{m}$ cavity length, the threshold current was 50㎃. The maximum differential quantum efficiency was 0.95W/A when the optical output was 60mW. The lasing wavelength of QW LD was 865nm. In the L-I measurement. TE mode was superior to TM mode. From the near field pattern, single lateral mode operation was observed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.3
• /
• pp.120-124
• /
• 1982

In this paper, the theoretical analysis of lateral guiding in stripe geometry DH Laser Diode is performed. In the analysis, the gain & refractive index variations in active layer are modeled by very analogous methmatical function to their real profile and the two dimensional lateral waveguiding of DH LD have been analyzed by perturbation theory. Finally, the beam width dependence of refractive index variation(n), active layer width(d), and cavity length(L), have been analyzed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.9
• /
• pp.1108-1114
• /
• 1988

Usng the P.Yeh's analytic method, we derive the condition for oscillation of a linear phase conjugate oscillator which consists of photorefractive medium and two conventional mirrors. From this general oscillation condition, we obtain the threshold oscillation conditon of a single phase conjugate resonator and the self-oscillation condition of photorefractive medium, then in special case (phase shift =90\ulcorner: no external dc electric field), oscillation conditions of the linear phase conjugate oscillator for any cavity length are derived. The results indicate that, unlike in a phase conjugate oscillator with Kerr-like medium, oscillation cannot occur at special cavity length for given couplinyg strengths.

• Korean Journal of Optics and Photonics
• /
• v.2 no.4
• /
• pp.197-202
• /
• 1991

The real time autocorrelator has been developed in order to measure the pulse widths of ultrashort laser pulses using the SHG method. The scanning range of the autocorrelator is 142 ps, and inserting a delay block in one arm of the autocorrelator, the scanning range can be extended to 250 ps. The shortest pulse width was measured to be 20 ps, when the cavity length was well matched to the RF frequency of the mode-locker, and broadened to be 39 ps and 47 ps as the cavity length was detuned.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.13-19
• /
• 1989

Passive mode-locking of a pulsed Nd:YAG laser is achieved with saturable absorbers, BDN dye in iodoethane solvent and Kodak Eastman # 26 dye in 1,2-dichloroethane solvent, and its optimum conditions are investigated. The thickness of saturable absorbers employed in the laser mode-locking is 0.16~0.50mm. The PBR (peak-to-background ratio) measured in the oscilloscope is 79.8% in Kodak Eastman # 26 dye at the neighbourhood of the peak power, whereas the passive mode-locking with BDN dye gives PBR of 67.7%. BDN and Kodak Eastman # 26 dyes are superior in photostability over Kodak eastman # 9860 and # 9740 dyes which were used previously in passive mode-locking. From the PBR curve, we find that Kodak Eastman # 26dye is more effective than BDN dye in passive mode-locking. The spacing between the adjacent pulses of the pulse train, which depends on the laser cavity length, is measured and is found to be 7 nsec for the cavity length of 100cm.

• Advances in aircraft and spacecraft science
• /
• v.5 no.4
• /
• pp.411-430
• /
• 2018

This computational study examines the augmentation of classic 2-D Rayleigh-$B{\acute{e}}nard$ convection by the addition of periodically-spaced transverse fins. The fins are attached to the heated base of the cavity and serve to partition the cavity into 'units' with different aspect ratios. The respective impacts upon heat transfer of the fin configuration parameters - including spacing, height, thickness and thermal conductivity - are systematically examined through numerical simulations for a range of laminar Rayleigh numbers (0 < Ra < $2{\times}10^5$) and reported in terms of an average Nusselt number. The selection of the low Rayleigh number regime is linked to likely scenarios within aerospace applications (e.g. avionics cooling) where the cavity length scale and/or gravitational acceleration is small. The net heat transfer augmentation is found to result from a combination of competing fin effects, most of which are hydrodynamic in nature. Heat transfer enhancement of up to $1.2{\times}$ that for a Rayleigh-$B{\acute{e}}nard$ cavity without fins was found to occur under favorable fin configurations. Such configurations are generally characterized by short, thin fins with half-spacings somewhat less than the convection cell diameter from classic Rayleigh-$B{\acute{e}}nard$ theory. In contrast, for unfavorable configurations, it is found that the introduction of fins can result in a significant reduction in the heat transfer performance.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.104-111
• /
• 2016

The flame stabilization is one of the topics which have to be solved for the airbreathing propulsion systems, using the entering air which is supersonic velocity as an oxygen sources. Making a recirculation zone with an eddy flow, installed the reducing velocity devices such as the bluff body, is the typical method of the flame stabilization. Recently using a cavity flame stabilization at the wall is an emerging technique as an effective method which extends the stabilization zone, and the related research papers have been published on the flow separation and reattachment, pressures and oscillations including length/depth ratios in the cavities. Even though, still there are lots of topics to study more in the cavity flame stabilization field as the preceding techniques, as well as the research and the development of the airbreathing propulsion system itself.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.2
• /
• pp.447-450
• /
• 2012

Video-assisted thoracic surgery (VATS) has been recommended as more optimal surgical technique than traditional thoracotomy for lobectomy in lung cancer, but it is not well defined. Here, we compared VATS and traditional thoracotomy based on clinical data. From November 2008 to November 2010, 180 patients underwent lobectomy for non-small-cell lung cancer (NSCL) identified by computerized tomography. Of them, 83 cases were performed with VATS and 97 by thoracotomy. Clinical parameters, consisting of blood loss, operating time, number of lymph node dissection, days of pleural cavity drainage, and length of stay were recorded and evaluated with t test. No significant difference was observed between the VATS and thoracotomy groups in the average intraoperative blood loss, number of lymph node dissections, and days of pleural cavity drainage. While the average operating time in the VATS group was significantly longer than that in thoracotomy group, recurrence was only present in one case, as opposed to 7 cases in the thoracotomy group In conclusion, similar therapeutic effects were demonstrated in VATS and thoracotomy for NSCL. However, VATS lobectomy was associated with fewer complications, recurrence and shorter length of stay.

• Animal Systematics, Evolution and Diversity
• /
• v.28 no.3
• /
• pp.149-160
• /
• 2012

Heterotrichous ciliates were isolated from marine and brackish habitats in Korea, and their morphology, infraciliature and morphometrical characters were investigated using silver impregnated methods. These three Condylostoma species were identified as Condylostoma curva Burkovsky, 1970, C. minutum Bullington, 1940 and C. spatiosum Ozaki and Yagiu in Yagiu, 1944. The species of Condylostoma based on morphology are highly variable in most of characters and distinguished as following. Condylostoma curva is oval to elongate ellipsoidal, size about $245{\times}100{\mu}m$ in vivo, and conspicuously dark greenish brown with cortical granules on their surface, buccal cavity relatively large about 40% of body length, 5-11 macronuclear nodules, 4-8 frontal cirri serially arranged and 22-38 somatic kineties. Condylostoma minutum is elongate ellipsoidal and the size about $310{\times}55{\mu}m$ in vivo, buccal field about 35% of body length, 12-20 macronuclear nodules, adoral zone consisted of 82-107 membranelles, large and long one frontal cirrus and 38-44 somatic kineties. Condylostoma spatiosum is large elongate ellipsoidal, size about $670{\times}105{\mu}m$ in vivo, buccal cavity about 25% of body length, 11-25 macronuclear nodules, 111-144 adoral membranelles, membrane-like 2 frontal cirri, 49-74 somatic kineties. These three Condylostoma species are described here for the first time in Korea.