• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.437-442
• /
• 1997

An experimental study was carried out in a channel cavity with square heat surface by visual¬ization equipment with Mach - Zehnder interferometer and laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two¬frame grey-level cross correlation algorithm. Heat source was uniform heat flux(o.4W/cm$^2$, , O.8W/cm$^2$, 1.2W/cm$^2$). Obtained result showed various flow patterns such as kinetic energy distribution. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach ~ Zehnder are also compared in terms of constant heat flux.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.110-116
• /
• 1994

In this research, the tensile strength of molded parts and pressure distribution were analyzed to study the cavity filling stage and packing stage in injection molding. The measurement of cavity pressure was obtained by a data acquisition system with the installation of transducers in the cavity. Molded parts were tested by a universal testing machine to obtain the tensile strength. For the experimental work, the tensile strength of molded parts increased with longer packing time and exact freezing time of the gate was obtained by a cavity pressure curve. In addition, the effect of packing did not occur and tensile strength was almost constant after early 1.5 sec of the freezing time of gate. Density tended to be higher about 0.2% due to a larger degree of mold temperature and melt temperature. Also, changing pressure in the cavity was effectively sensed. Thereafter, the possibility of the development of pattern recognition expert system was confirmed on the basis of the experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.597-598
• /
• 2011

• 한국항공우주학회지
• /
• 제31권1호
• /
• pp.97-103
• /
• 2003

연소기 내부에서 연소효율의 증대목적으로 사용되어지고 있는 후향계단후류의 측면제트 분사가 있는 초음속 난류유동장에 대한 수치적 연구를 수행하였다. 본 연구에서는 2차원 Navier_Stokes 방정식과 k-$\varepsilon$ 난류모델식을 고해상도 풍상차분법인 TVD 기법을 사용하여 비정상 유동장에 대한 수치계산을 수행하였다. 유동특성은 제트분사에 의한 마하면이 장애물 역할을 하여 후향계단과 마하면사이에 공동유동(cavity flow)과 비슷한 유동현상이 나타난다. 따라서, 공동 유동에서 발생하는 유동의 진동특성이 나타날 것을 예측할 수 있다. 수치계산 결과에서도 모맨텀플럭스와 분사위치에 따라, 공동유동에서 발생하는 진동특성을 갖는 비정상 유동 특성이 나타나는 것을 볼 수 있었다.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.997-1002
• /
• 2013

본 연구에서는 자성유체의 열-유동 특성을 고찰하기 위하여 밀폐된 정방형관내 자성유체의 열-유동 특성에 관하여 GSMAC법을 이용하여 수치해석적으로 접근하였다. 자성유체의 지배방정식은 자연대류의 연속, 운동량 및 에너지 방정식과 나노자장입자의 자장 및 자화방정식을 추가로 고려하였고 밀폐된 정방형관의 외부에서 가하는 인가자장 세기 및 방향에 따른 자성유체의 온도 및 열전달계수 등의 열전달 특성과 유선 및 등온선도 등의 유동 특성의 변화를 규명하였다. 그 결과, 정방형관내 자장이 수평방향으로 인가될 경우 인가자장 H=-6000에서 평균 Nusselt 수가 0.1592가 되었으며, 자성유체의 열-유동 현상을 인가자장의 세기 및 방향에 따라 제어할 수 있게 되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.115-122
• /
• 2000

본 연구에서는 2 차원 벽구동 캐비티 유동에 의하여 나타나는 이력효과에 의한 분기(Bifurcation)현상을 전산유체기법을 사용하여 연구하였다. 캐비티는 북쪽과 동쪽벽이 움직일 수 있고, 다른 두 벽은 고정되어있는 구조이다. 실험은 Reynolds 수 100 에서 1000까지 증가시켜가면서 북쪽벽과 동쪽벽을 동시에 가속 시켜 정상상태에 이르게 한 경우와 북쪽벽이 먼저 가속되어 정상해에 이른 후 동쪽벽을 나중에 가속하여 재차 정상상태에 이르게 한 경우를 비교하였다. 그 결과 Reynolds수가 약 200이상부터 벽에 작용하는 항력, 유량함수의 값, 재부착점등이 분기현상을 나타냄을 확인하였다.

• 한국가시화정보학회지
• /
• 제2권1호
• /
• pp.46-51
• /
• 2004

This paper deals with the evaluation of several boundary conditions which are commonly used in the lattice Boltzmann equation method. 2-D channel flow(Poiseuille flow) and lid-driven cavity flow was selected as a test problem of this study, because there exist an analytic solution and previous study which could be used for a benchmarking test. It was found that lattice Boltzmann method still needs more considerations of stability and physical consistency, though it could predict the flow patterns both qualitatively and quantitatively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1875-1879
• /
• 2004

This paper deals with the evaluation of several boundary conditions which are commonly used in the lattice Boltzmann equation method. 2-D channel flow(poiseui1le flow) and lid-driven cavity flow was selected as a test problem of this study, because there exist an analytic solution and previous study which could be used for a benchmarking test. It was found that lattice Boltzmann method still needs more considerations of stability and physical consistency, though it could predict the flow patterns both qualitatively and quantitatively.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.117-120
• /
• 2002

An experimental research has been carried out for flow control of the shock wave/turbulent boundary-layer interaction utilizing aeroelastic mesoflaps. Various shapes and thicknesses of the mesoflap are tested to achieve different deflections of the flap, and ail the results are compared to the solid-wall reference case without flow-control mechanism. Quantitative variation of skin friction has been measured downstream of the interactions using the laser interferometer skin friction meter, and qualitative skin friction distribution has been obtained by observing the interference fringe pattern on the oil-film surface. A strong spanwise variation in the fringe patterns with a narrow region of separation near the centerline is noticed to form behind the shock structure, which phenomenon is presumed partially related to three-dimensional flow structures associated with both the sidewalls and the bottom test surface. The effect of the shape of the cavity is also observed and it is noticed that the shape of the cavity is not negligible.

• 대한조선학회논문집
• /
• 제54권4호
• /
• pp.321-328
• /
• 2017

In practice, cavitation phenomena occur in unbounded flows. However, the wall effect is unavoidable during experiments at a closed section such as a cavitation tunnel. Especially, supercavity generated behind a cavitator is relatively large and thick, so that geometric and dynamic characteristics of the cavity are affected by the tunnel wall. In order to apply experimental results into the unbounded flow field, physical correlations are necessary. In this paper, we proposed an image method based on a potential flow to simulate the wall effect. Considering two-dimensional wedge-shaped bodies, configurations and drag characteristics of the cavity were examined according to the distance ratio to the wall surface. The results were compared and verified with existing theoretical and experimental results.