• Journal of Chest Surgery
• /
• 제6권1호
• /
• pp.29-36
• /
• 1973

It has been known that the pulmonary mycosis generally results from saphrophytic colonization of pre-existing lung cavities, e.g. , due to pulmonary tuberculosis, abscess, bronchiectasis. or congen-ital cysts. Recently, the authors experienced four cases of the pulmonary mycosis which were all treated surgically, and in our opinion, three of them were considered to arise from secondary saphrophytic colonization of pre-existing tuberculous cavities by serial chest roentgenograms. One of them was actinomycosis which was known as relatively rare pulmonary mycosis, and its clinical experience was previously reported. The purpose of this report is mainly to review our clinical experience and some related literatures with three patients with aspergillosis. Many writers have stressed the sputum culture for aspergillus, immunologic study and serial roentgenographic findings were all important or essential in diagnosing aspergillosis. Surgical resection appears to be the treatment of choice for the mycosis of lung, and systemic administration of effective anti-fungal agents such as amphotericin B for aspergillosis and penicillin for actinomycosis respectively following surgical intervention is usually necessary to eradicate completely.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.498-501
• /
• 2008

Knowledge of airflow characteristics in nasal cavities is essential to understand the physiological and pathological aspects of nasal breathing. Several studies have utilized physical models of the healthy nasal cavity to investigate the relationship between nasal anatomy and airflow. In our laboratory, there have been a series of experimental investigations on the nasal airflow in normal, abnormal, and deformed nasal cavity models cavity models by PIV under both constant and periodic flow conditions. In this time normal and several deformed nasal cavity models, which simulate surgical operation, Turbinectomy, are investigated numerically by the FVM general purpose code and PIV analysis. The comparisons of these results are appreciated. Dense CT data and careful treatment of model surface under the ENT doctor's advice provide more sophisticated cavity models. The Davis (LaVision Co.) code is used for PIV flow analysis. Average and RMS distributions have been obtained for inspirational and expirational nasal airflows in the normal and deformed nasal cavities.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1799-1808
• /
• 2004

Knowledge of airflow characteristics in nasal cavity is essential to understand the physiological and pathological aspects of nasal breathing. Several studies have utilized physical models of the healthy nasal cavity to investigate the relationship between nasal anatomy and airflow. Since the final goal of these works is their contribution to the diagnosisand treatment of nasal diseases, the next step on this topic is naturally studies for disordered nasal cavities. In this paper, as the first application, airflows in the normal and abnormal nasal cavities with adenoid vegetation are investigated experimentally by PIV, and comparisons of both cases are appreciated. Dense CT data and careful treatment of model surface under the ENT doctor's advice provide more sophisticatedcavity model. The CBC PIV algorithm with window offset is used for PIV flow analysis. Average and RMS distributions are obtained for inspirational and expirational nasal airflows. Airflow characteristics that are related with the abnormalities in nasal cavity are presented.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.139-143
• /
• 1999

Solidification simulation of gray cast iron sheave product was conducted with the consideration of graphite precipitation during solidification, and of casting processes such as post-inoculation method, treatment and rate, the result of which was aimed to be adopted in the field. In risering design(I), shrinkage cavities were predicted to occur in the part below the risers and center part of the product. While the former defect was considered to be due to the solidification behaviour of riser neck, the latter was due to the feeding channel. In design(II), the length of the riser neck was reduced and one top open riser was attached in the center of the product to prevent the formation of shrinkage cavities, whereby defect-free product was produced.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.173-182
• /
• 1995

The purpose of this study was to evaluate the adaptability of light-cured glass ionomer cement to cavity walls. Class V cavities were prepared on the labial surfaces of extracted bovine incisor teeth. The cavities were restored with Fuji II as self-cured glass ionomer cement and Fuji II LC, Vitremer as light-cured glass ionomer cement. Fluorescent markers (fluoreceine and rhodamin B) were incorperated into liquid and primer for a better image of microscopic observation. Restored teeth were sectioned by longitudinal and labiolingual direction. The adaptability at the tooth-restoration interface was assessed incisally, axially and cervically by confocal scanning laser microscope. Following results were obtained : 1. Chemical-cured glass iomomer cement restoration showed close adaptation on the all of the cavity walls, but, cracks formed within the cement. 2. Light-cured glass ionomer cement restoration was well adapted to the cavity walls, but showed crack in the cement adjacent to axial dentinal wall. 3. There' was no significant difference in adaptability between two light-cured glass ionomer cement restorations.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.569.2-569
• /
• 2001

Flowable and microfill composites have been recommended for Class V cavities. But the use of flowable composites is controversial because of its physical properties. Objectives: The aim of this study was to evaluate the microleakage of 6 composites (2 hybrids, 2 microfills, and 2 flowable composites) with/without load cycling. Methods: Notch-shaped Class V cavities were prepared on buccal surfaces of 180 extracted human upper premolars and then divided into non-load cycling group(G1) and load cycling group(G2).(omitted)

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.591.2-591
• /
• 2001

Microleakage of restorative materials has been investigated mostly by dye penetration method. Dye penetration method was not quantitative and not measured repeatedly. Fluid filtration method was used to research purpose to understand the effects of various restorative treatments on dentin permeability. The purpose of this study was to evaluate of dentin permeability according to the process of compomer restoration treatment. In this study, C1 V cavities were prepared on buccal surface of thirty extracted human molars. The prepared cavities were etched by 37% phosphoric acid.(omitted)

• Tribology and Lubricants
• /
• 제25권3호
• /
• pp.141-149
• /
• 2009

The effect of micro-cavities fabricated using laser surface texturing (LST) technique on polyoxymethylene (POM) surface was studied in terms of heat affected zone (HAZ), cavity geometry, surface roughness, deformation of cavity along with sliding cycles, and tribological characteristics. Cavity process parameters were lamp current, process time, and the stream of air used to minimize the flow of molten polymer into cavity. Especially, the deformation of cavity geometry was extensively studied to provide deep insight into morphological analysis of the cavities. Also, this paper presents the behavior of friction and wear of POM specimens as a function of sliding cycles.

• 대한수의학회지
• /
• 제30권4호
• /
• pp.395-400
• /
• 1990

A female Korean native calf with diprosopus was examined macroscopically and radiographically. Anterior head duplication (diprosopus) was observed and all structures caudal to it were normal. She had two complete mouths, four eyes and three ears. Single tongue was present in each oral cavity. The two tongues were joined at their base just posterior to the single epiglottis. Both oral cavities led jointly into a common pharynx and one esophagus. One laryngeal cavity communicated with one common trachea. The lower jaws were immobile because of overlapping mandibular rami. The atlas was complete, and two anterior articular cavities articulated with the lateral condyles of the occipital bones of each skull. The cerebrums were fused each other at their caudal portion, and the giri and sulci were underdeveloped. The cerebellums were also completely fused, and they had not characteristic appearance of the vermis. The spinal cord showed normal appearance.

• Restorative Dentistry and Endodontics
• /
• 제2권1호
• /
• pp.7-9
• /
• 1976

This study was performed to reveal the effect of self-curing acrylic resin to dental pulp when the resin was used directly on the freshly cut dentin. Class V cavity preparations were made on the teeth of dogs with No. 701 carbide bur at a speed of 200,000 rpm and with an air water spray. Petrolatum jelly was coated on the inner surfaces of the cavities. After that, doughs of self-curing acrylic resin were filled in these cavities and before completely set these were removed and cemented with zinc oxide and eugenol cement. The dogs were sacrified between 1 day and 3 weeks at the intervals of one week and routinely processed with hematoxylin and eosin stain for histopathologic interpretation. The results were as followings; 1. The inflammatory changes of the pulp can be seen after the use of self-curing acrylic resin on freshly cut dentin. 2. The inflammatory changes of the pulp were not completely subsided until the end of third experimental week.