• Transactions of Materials Processing
• /
• v.14 no.6 s.78
• /
• pp.559-564
• /
• 2005

INCONEL 718, nickel based superalloy, has good formability, high strength, excellent corrosion resistance and mechanical properties at high temperature. Owing to theses attractive properties, it is utilized in applications such as combustion system, turbine engines and nuclear reactors. In such applications, components are typically required to be tolerant of high stress impact loading. This may cause material degradation and lead to catastrophic failure during service operation. Accurate understanding of material's mechanical properties with various strain rates is required in order to guarantee the reliability of structural parts made of INCONEL 718. This paper is concerned with the dynamic material properties of the INCONEL 718 at various strain rates. The dynamic response of the INCONEL 718 at the intermediate strain rate is obtained from the high speed tensile test and at the high strain rate is from the split Hopkinson pressure bar test. The effect of the strain rate on dynamic flow stress, work hardening characteristics, strain rate sensitivity and elongation to the failure is evaluated with the experimental results. Experimental results from both the quasi-static and the high strain rate up to 5000/sec are interpolated in order to construct the Johnson-Cook model as the constitutive relation that should be applied to simulate and design the structural parts made of rNCONEL 718.

• Korean Journal of Metals and Materials
• /
• v.46 no.10
• /
• pp.662-671
• /
• 2008

The behavior of hydrogen in the steel making process was investigated. The relation between the composition of ladle slag and hydrogen concentration in molten steel was considered. The hydrogen distribution ratio between ladle slag and molten steel was increased with increasing basicity of the slag; it was about 20 when the basicity of slag was 15. Hydroxyl capacity measured from the hydrogen distribution ratio between slag and the molten steel was comparatively corresponding to the value of hydroxyl capacity measured by the equilibrium reaction of slag and $H_2O$ gas. However, it is considerably different from the value calculated by regular solution model. The influence of hydrogen on a sticking type breakout is considered. The effect of hydrogen and $H_2O$ gas on the crystallization behavior of mold powder was investigated by DHTT (Dual hot thermocouple technique). As a result, it was proved that mold powder could be crystallized by $H_2O$ gas in the atmosphere. Therefore, it is concluded that $H_2O$ gas in the atmosphere can be a possible cause of the sticking type breakout that occasionally occurs in the continuous casting process.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.10-19
• /
• 2009

The working of diesel particulate filters(DPF) needs to periodically burn soot that has been accumulated during loading of the DPF. The prediction of the relation between an uniformity of gas velocity and soot regeneration efficiency with simulations helps to make design decisions and to shorten the development process. This work presents a comprehensive combined 'DOC+CDPF' model approach. All relevant behaviors of flow fluid are studied in a 3D model. The obtained flow fields in the front of DPF is used for 1D simulation for the prediction of the thermal behavior and regeneration efficiency of CDPF. Validation of the present simulation are performed for the axial and radial direction temperature profile and shows goods agreement with experimental data. The coupled simulation of 3D and 1D shows their impact on the overall regeneration efficiency. It is found that the flow non-uniformity may cause severe radial temperature gradient, resulting in degrading regeneration efficiency.

• IE interfaces
• /
• v.19 no.3
• /
• pp.255-269
• /
• 2006

Digital manufacturing(DM) is the ability to describe every aspect of the design-to-manufacture process digitally-using tools that include digital design, CAD, office documents, PLM(Product Life-cycle Management) systems, analysis software, simulation, CAM software and so on. The major automotive companies are already deeply invested in DM with almost every process being digital rather than paper-based. But it has taken a long time for the digital process to mature into something usable and there have been some major barriers that have prevented from the DM becoming a reality. Thus many companies hesitate to make a decision of implementing the DM. This paper deals with a study investigating which factors are important for implementing the DM to industries successfully. The extended technology acceptance model (ETAM) is used as the relation model of cause and effect. The quality of hardware, the quality of software, the range of collaboration among companies and the preference of the user are defined as the external factors. Interview method is used for gathering input data, and the results are analyzed with SPSS. The results indicate that four external factors are effective on the successful implementation of DM, and the perceived usefulness is most important.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.971-980
• /
• 1997

This study is to investigate the stiffness degradation of a composite laminated panel including transverse matrix cracks subjected to bending and twisting moments. Micromechanics theory on the composite material is derived by introducing crack density. Iterative numerical scheme is developed to calculate the degraded composite stiffness which has nonlinear relation due to the crack density. The finite element method is used for structural analysis of the composite panel. Structural responses of the composite panel are examined for various laminated angles and crack density under the bending and twisting moments. Also, the effect of crack opening and closing is considered in the examination. It is realized that the matrix cracks may cause severe stiffness reduction and should be considered in the composite laminated panel.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.4
• /
• pp.471-477
• /
• 1998

Cyclosporin A (CsA), a widely used immunosuppressant, is well known to cause nephrotoxicity and hypertension as major side effects. The present study was aimed at investigating the effects of CsA-pretreatment on the activities of cytosolic guanylate cyclase (cGC) in relation to the alteration of relaxant responses in the rat thoracic aorta. CsA $(10\;{\mu}M)-preincubation$ for 90 min significantly attenuated the vasodilatation induced by sodium nitroprusside (SNP), a cytosolic guanylate cyclase activator, shifting the dose-response curve to the right. The increase in cGMP contents induced by SNP was markedly attenuated by CsA. SNP ($1\;{\mu}M{\sim}\;mM$) increased the cGC activity dose-dependently, and the increase was completely abolished by CsA. CsA attenuated the SNP-induced cGC activation dose-dependently. The abolishing effect of CsA-pretreatment on the SNP-induced cGC activation was not affected by washing the preparation, suggesting that the inhibition is irreversible. When CsA was added simultaneously with SNP, cGC activation was not attenuated. 1-(5-isoquinolinylsulfonyl)-2-methyl piperazine (H-7), a protein kinase C (PKC) inhibitor, decreased SNP-induced cGC activation and blocked the CsA-attenuation of cGC activation. These results suggest that CsA directly inhibits cGC participating in the CsA-induced impairment of vasodilatation, and that PKC is involved in the inhibitory action of CsA on cGC.

• Journal of Distribution Research
• /
• v.4 no.2
• /
• pp.1-20
• /
• 1999

This study aims to provide distributors with several implications on the channel strategy by testing factors which influence on the offsetting investment. Medium-sized distributor facing a relatively inferior power can cause profit vulnerability from large manufacurer's opportunistic behaviors. At the same time, we tested the relationship commitment to the relation with manufacturer as another alternative strategy taken by medium-sized distributer. For this research, samples from dealers in oil-petroleum refinery industry were selected and the data was collected using mail survey. The data was analyzed utilizing validity test, reliability test, factor analysis, correlation analysis and LISREL. The major analyzed results are as follows: First, the offsetting investment of preventing loss from manufacturer's opportunism didn't affect medium-sized distributor's sales empirically. Second, the hypothesis that the more the medium-sized distributor's transaction specific assets which they invest in the transactional relationship with manufacturer, the more the safeguard against the expected opportunism of manufacturer was not supported by the results. Third, the more use of coercive power by the manufacturer, the more increase in the perception of expected opportunism of manufacturer by the medium-sized distributor, it make stimulates offsetting investment as safeguard by medium-sized distributor and it has negative effect on developing commitment. Finally, the large manufactures dealing with a medium-sized distributor firm which had a reputation of fairness didn't make offsetting investment as a response for distributor's opportunism.

• Korean journal of applied entomology
• /
• v.42 no.4
• /
• pp.345-352
• /
• 2003

Studies were conducted to find out the justification for levee-burning, customarily executed by farmers for long time, Experiments were carried out in farmers fields with levee-burning early in the season, and some pesticides spraying when necessary from 1995 to 1997. Some data collected are analysed and discussed from several available aspects of surroundings. In relation to some results obtained together with some previous evidences, levee-burning seems to have several adverse effects on levee destruction, partial cause of forest fire, and lowering of spider density in the field during fall, without providing any benefit, while causing no signifant effect on weed flora on levee, insect density in the field, and incidence of the rice-blast. Therefore, concequently, it could be recommend that the levee-burning by farmers should not be continued.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.133-141
• /
• 2011

Urban development of basin causes increasing runoff volume and peak flowrate and shortening in time of concentration, which may cause frequent flooding downstream. An infiltration facilities are operated as a method of reducing flood discharge of urban rivers and peak flowrate. There are various types of infiltration facilities like infiltration trench and porous pavement. In this study, runoff reduction effect due to installation of infiltration facilities are performed and focused on $0.18km^2$ residential area of Ok-kye dong and $0.67km^2$ industrial area of Gong-dan dong in Gumi City. The analysis is fulfilled with comparison of total runoff volume and runoff reduction volume by using the WinSLAMM and the relation equation between area ratio of infiltration facilities and ratio of runoff reduction are derived and peak flow reduction effect for installation of infiltration facilities is analyzed.

• Korean Journal of Psychosomatic Medicine
• /
• v.10 no.2
• /
• pp.69-77
• /
• 2002

The Daseinsanalytic understanding of somatization as a phenomenon begins with a question about the real nature of human body. The human body is primarily not an object of scientific study, which is based on the dichotomy of mind and body, but it is an existential body(Leiblichkeit) disclosing the meaning of Beingness of human being. Since the meaning always discloses itself in man's relations with his world, his body in existential nature expresses his relations with the world. Such a somatic expression of world relations is the phenomenon of somatization whose meanings are illuminated by phenomenological method, which is unlike the method adopted by natural science investigating the cause and effect.