• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.12
• /
• pp.1702-1714
• /
• 1998

Removal of spilled oil over the sea and the river has become one of the urgent problems in these days. Removing oil using mechanical devices was recommended because chemical dispersion could cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of operating conditions, especially, the angle between the belt and the fluid surface on the rate of recovery for the spilled oil using a belt skimmer. Three different types of operation, namely, upward pickup, downward pickup and up-and-downward pickup situations have been investigated for various contact angles, belt speeds and oil thicknesses to find the effects on the recovery rate. The highest rate of oil recovery was found in the case of a contact angle of $45^{\circ}$ and downward pickup. Furthermore, an optimal belt speed was found to reach the saturated recovery rate for a given oil thickness.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.193-202
• /
• 2005

Marine risk assessment considers events such as collision/grounding, sinking/capsize, fire/explosion and flooding, developing relationships between their causes and effects. In addition, risk assessment of previously sunken ships are also necessary since they continuously have possibility for further oil spill or can cause other marine accidents. The objective of this paper is to develop the risk assessment systems for sunken ships to prevent oil spill and further marine causalities in order to preserve safe and clean oceans around Korea peninsula. The risk assessment systems for sunken ships comprise of database management sub-system for sunken ships, qualitative risk assessment sub-system, quantitative risk assessment sub-system, and cost-benefit analysis subsystem.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.264-272
• /
• 2009

Due to an oil spill accident occurred in Taean coastal zone wide range of coastal waters were polluted. Inaccurate prediction of spilled oil trajectory is known as a cause that has increased the pollution damage in the beginning stage. In this study, a numerical modeling of spilled oil dispersion has been conducted to know which physical factors caused the severe and wide pollution. Especially the simulation is focused on how to model hydrodynamic circulation accurately. The simulation results showed that the hydrodynamic flow is very important in predicting oil fate, specially, in the short-term dispersion of spilled oil.

• Korean Journal of Hazardous Materials
• /
• v.2 no.1
• /
• pp.6-11
• /
• 2014

There have been frequent chemical leaks over the past 10 years. Particularly, inorganic acids like sulfuric acid, nitric acid, and hydrogen chloride take up 37 % of the total chemical accidents which took place for the past 10 years. When an acid chemical leak happens, fume is generated, diffusing into the air, which might cause serious damage to health of local residents and the environment. However, most of the acid-based chemicals, detecting and analysis methods have not been settled considering the frequency of accidents. In this study, we investigated detection and analysis methods to quickly analyze accident sites and evaluate the impacts on environments. Reviewing local and international test analysis methods of acids suggested that nitric acid, sulfuric acid, hydrogen chloride and hydrogen fluoride can be analyzed with IC. It was also found that UV is better for the analysis of hydrogen fluoride and GC/MS for acrylic acid. The analytical methods suggested in the official test methods basically have limitations of consuming much time at stages of preparation and analysis. Considering prompt responses to chemical accidents, further studies should be done to compare the applicability of rapid monitoring methods such as FT-IR, IMR-MS and SIFT-MS.

• Plant Journal
• /
• v.16 no.3
• /
• pp.42-46
• /
• 2020

In the large LNG process in FLNG or FSRU, sudden temperature drops of the steel in the event of LNG leaks may cause brittle fracture of the structure. In this paper, we investigate the principle and process of forming a cryogenic fluid on a steel plate through a cryogenic spillage experiment, and analyze the correlation of the temperature distribution of the steel plate according to the distance from the nozzle and exposure time. Two types of cryogenic fluids were used: LN2 and LNG. The cyogenic liquid was released on the steel plate at 1.6L/min for LN2 and 1.5L/min for LNG. For the steel, DH was used and the temperature was measured at 10 points in total. The Leidenfrost effect was observed on the steel plate, and the temperature distribution of the steel was varied according the flow path and the heat of evaporation of the fluid.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.11a
• /
• pp.73-88
• /
• 1995

I. Introduction II. State of vessel-source marine pollution 1. Pollution by tanker accidents 2. Pollution by tanker operations 3. Pollution by chemicals 4. Pollution by garbage and sewage III. Regulatory regime for ship safety and vessel-source 1. Regime for ship safety 2. Regime for vessel-source marine pollution prevention IV. Cause analysis of Contemporary vessel-source marine pollution. 1. Diversity of interested parties of shipping 2. Fierce international competition of shipping 3. Wide variagions in ship safety indicators by natons 4. Limitation of enforcing oil spill activities 5. Limitation of international countermeasures V. Summary conclusions and suggestions Note and References

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.123-128
• /
• 2000

The ocean is now increasingly suffering from pollution mainly caused by oil spill accidents roil increasing marine transportation. It cause not only the deterioration of ocean resources but also critical damage on the ocean ecosystem. Present study is an experimental one for the development of the oil skimmer which can collect spilled-oil actively and effectively from the sea surface. As an effort of achieving it, a new type of water wheel attached nil skimmer was devised, based upon the concept of orifice. The shapes of the water wheel, blades and oil storing tank are found to be very important factors on the oil skimming performance through systematic experimental analysis. Real oil recovery test was also carried out in square tank using the oil skimmer with their optimal shapes. Quite satisfactory result are obtained from the test which showed 99% and 98% recovery rates for light oil and heavy oil in still water condition, respectively.

• KIEAE Journal
• /
• v.10 no.2
• /
• pp.71-78
• /
• 2010

Spill light by street lighting is a kind of light pollution creating cozy night atmosphere, interfere visual private and cause insomnia at night. This study was to survey light trespass of the windows in residential buildings. According to outdoor lighting control guidance in Seoul, three different areas were selected to investigate the trespass light to windows. The results were as follows: 37% of the buildings of 386 buildings were influenced by street lighting, and 47% of windows were occurred light trespass. Therefore, the street lighting affected light trespass at night in survey area. The main reasons of light trespass were luminaire type, luminaire pole height, and street width. For protecting the light trespass to windows, it is necessary to non-cutoff fixture to full cutoff fixture by the street width.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.845-859
• /
• 2020

Climate change and recent heat waves have drawn public attention toward other environmental issues, such as water pollution in the form of algal blooms, chemical leaks, and oil spills. Water pollution by the leakage of chemicals may severely affect human health as well as contaminate the air, water, and soil and cause discoloration or death of crops that come in contact with these chemicals. Chemicals that may spill into water streams are often colorless and water-soluble, which makes it difficult to determine whether the water is polluted using the naked eye. When a chemical spill occurs, it is usually detected through a simple contact detection device by installing sensors at locations where leakage is likely to occur. The drawback with the approach using contact detection sensors is that it relies heavily on the skill of field workers. Moreover, these sensors are installed at a limited number of locations, so spill detection is not possible in areas where they are not installed. Recently hyperspectral images have been used to identify land cover and vegetation and to determine water quality by analyzing the inherent spectral characteristics of these materials. While hyperspectral sensors can potentially be used to detect chemical substances, there is currently a lack of research on the detection of chemicals in water streams using hyperspectral sensors. Therefore, this study utilized remote sensing techniques and the latest sensor technology to overcome the limitations of contact detection technology in detecting the leakage of hazardous chemical into aquatic systems. In this study, we aimed to determine whether 18 types of hazardous chemicals could be individually classified using hyperspectral image. To this end, we obtained hyperspectral images of each chemical to establish a spectral library. We expect that future studies will expand the spectral library database for hazardous chemicals and that verification of its application in water streams will be conducted so that it can be applied to real-time monitoring to facilitate rapid detection and response when a chemical spill has occurred.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.132-143
• /
• 1997

Removal of spilled oil over the sea and the river has become one of the urgent problem in these days. Removing oil using mechanical devices are recommended because chemical dispersion can cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of working conditions of a belt type skimmer on the rate of recovery for the spilled oil. The oil chosen for the present experiment was diesel oil. Three different situations, namely, upward, downward, up-and-downward pickup have been investigated for various contact angles, belt speeds and oil thicknesses. The results show that the rate of oil recovery for the case of downward pickup with a contact angle of 45.deg. shows the highest among all the conditions. For the removal of spilled diesel oil the optimal belt speed can be found as the critical value to reach the saturated pickup rate for a given oil thickness. The recovery rate of bunker C oil shows 4-6 times higher than that for diesel oil. And the optimal belt speed for bunker C oil can be found less than that for diesel oil for the same slick thickness.