• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.328-334
• /
• 2009

Statement of problem: Pier abutments act as a Class I fulcrum lever system when the teeth are incorporated in a fixed partial denture with rigid connectors. Therefore non-rigid connector incorporated into the fixed partial denture might reduce the stresses created by the leverage. Purpose: The purpose of this study was to evaluate, by means of finite element method, the effects of non-rigid connectors and supporting alveolar bone level on stress distribution for fixed partial dentures with pier abutments. Material and methods: A 2-dimensional finite element model simulating a 5-unit metal ceramic fixed partial denture with a pier abutment with rigid or non-rigid designs, the connector was located at the distal region of the second premolar, was developed. In the model, the lower canine, second premolar, and second molar served as abutments. Four types of alveolar bone condition were employed. One was normal bone condition and others were supporting bone reduced 20% height at one abutment. Two different loading conditions, each 150 N on 1st premolar and 1st molar and 300N on 1st molar, were used. Results: Two types of FPD were displaced apically. The amount of displacement decreased in an almost linear slope away from the loaded point. Non-rigid design tended to cause the higher stresses in supporting bone of premolar and molar abutments and the lower stresses in that of canine than rigid design. Alveolar bone loss increased the stresses in supporting bone of corresponding abutment. Conclusion: Careful evaluation of the retentive capacity of retainers and the periodontal condition of abutments may be required for the prosthetic design of fixed partial denture with a pier abutment.

• Clean Technology
• /
• v.17 no.4
• /
• pp.306-313
• /
• 2011

Flux or solder is used in soldering process for manufacturing electronic parts such as printed circuit boards (PCB). After soldering process, residual flux and solder paste on the parts should be removed since their residuals could cause performance degradation or failure of parts due to their corrosion and electric leakage. Ozone depletion substances such as 1,1,1- trichloroethane (TCE) and HCFC-141b have widely been using for removal of residual flux and solder paste after soldering process In manufacturing of electronic parts until now. In this study, non-aqueous cleaning agents without flash point were developed and applied to industrial field for replacement of cleaning agents with ozone depletion. In order to develop non-aqueous cleaning agents without ethers, esters, fluoride- type solvents. And their physical properties and cleaning abilities were evaluated, and they were applied to industrial fields for cleaning of flux and solder on the PCB. And vacuum distillation apparatus were operated to determine their operating conditions and recycling yields for recycling of used cleaning agents formulated in this study. As a result of physical properties measurement of our formulated cleaning agents, they were expected to have good wetting and penetrating power since their surface tensions were relatively low as 18.0~20.4 dyne/$cm^2$ and their wetting indices are relatively large. And some cleaning agents holding fluoride-type solvents as their components did not have any flash point and they seemed to be safe in their handling and storage. The cleaning experimental results showed that some cleaning agents were better in their cleaning of flux and solder paste than 1,1,1-TCE and HCFC-141b. And industrial application results of the formulated cleaning agents for cleaning PCB indicated that they can be applicable to industry due to their good cleaning capability in comparison with HCFC-141b. The recycling experiments of the used formulated cleaning agents through a vacuum distillation apparatus also showed that their 91.9~97.5% could be recycled with its proper operating conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.4
• /
• pp.370-377
• /
• 2003

Background : Pneumocystis carinii pneumonia (PCP) is one of the most common cause of infection in patients with HIV infection. Recently, the incidence of PCP have been increasing in immunocompromised hosts without HIV infection. We compared the clinical characteristics of PCP between HIV infected and non-infected persons. Patients and Methods : We retrospectively reviewed the charts of 25 patients diagnosed as PCP from 1996 to 2002. Age, sex, underlying conditions, use of immunosuppressants, clinical courses, laboratory findings, treatment and prognosis were compared between HIV infected and non-infected persons. Results : Twenty-five patients with PCP were identified. 16 were HIV infected, and 9 were HIV non-infected. The mean age of overall patients was $43.4{\pm}13.2$ years. Underlying conditions in HIV non-infected persons were hematologic malignancy (7 cases), solid organ transplant (1 case), and autoimmune disease (1 case). Seven cases (77.8%) of HIV non-infected persons had a history of steroid use. Mean duration of symptoms was longer in HIV infected persons than in HIV non-infected persons, but it was not statistically significant. PaO2 was lower in HIV infected persons ($61.2{\pm}16.9$ mmHg vs. $65.4{\pm}15.4$), but it was not statistically significant. Chest X ray showed typical ground glass opacity in 12 cases (75%) of HIV infected persons and in 4 cases (44.4%) of HIV non-infected persons. Twelve cases (75%) of HIV infected persons were treated with steroid, as were 6 cases (66.7%) of HIV non-infected persons. Ventilator care was needed in 6 cases (37.5%) of HIV infected persons and in 2 cases (22.2%) of HIV non-infected persons. Mortality of HIV infected persons was 50%, and that of HIV non-infected persons was 11.1%. Conclusions : PCP showed some different clinical characteristics between HIV infected and non-infected persons. Prospective studies regarding the risk factors of PCP, prophylaxis, treatment and prognosis in HIV infected and non-infected persons are warranted.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.103-111
• /
• 1985

Childhood epilepsy which has high prevalence rate and inception rate is one of the commonest problem encountered in pediatrician. In contrast with epilepsy of adult, in childhood epilepsy, more variable and varying manifestations are found because the factors of age, growth and development exert their influences in the manifestations and the courses of childhood epilepsy. Moreover epileptic children have associated problems such as physical and mental handicaps, psychologicaldisorders and learning disability. For these reasons pediatrician who deals with epileptic children experiences difficulties in making diagnosis and managing them. In order to improve understanding and management of childhood epilepsy, authors reviewed 103 cases of epileptic patients seen at pediatric department of Yeungnam University Hospital retrospectively. The patients were classified according to the type of epileptic seizure. Suspected causes of epilepsy, associated conditions of epileptic patients, age incidence and the findings of brain CT were reviewed. Large numbers of epileptic patients (61.2%) developed their first seizures under the age of 5. The most frequent type of epileptic seizure was generalized ionic-clonic, tonic, clonic seizure (49.5%), followed by simple partial seizure with secondary generalization (17.5%), simple partial seizure (7.8%), a typical absence (5.8%) and unclassified seizure (5.8%). In 83.5% of patients, we could not find specific cause of it, but in 16.5% of cases, history of neonatal hypoxia (4.9%), meningitis (3.9%), prematurity (1.9%), small for gestational age (1.0%), CO poisoning (1.0%), encephalopathy (1.0%), DPT vaccination (1.0%), cerebrovascular accident (1.0%) and neonatal jaundice (1.0%) were found, 30 cases of patients had associated diseases such as mental retardation, hyperactivity, delayed motor milestones or their combinations. The major abnormal findings of brain CT performed in 42 cases were cortical atrophy, cerebral infarction, hydrocephalus and brain swelling. This review stressed better designed classification of epilepsy is needed and with promotion of medical care, prevention of epilepsy is possible in some cases. Also it is stressed that childhood epilepsy requires multidisplinary therapy and brain CT is helpful in the evaluation of epilepsy with limitation in therapeutic aspects.

• Korean Journal of Weed Science
• /
• v.16 no.3
• /
• pp.200-209
• /
• 1996

It is assumed to be an efficient method for keeping a germinability of weed seeds as long as possible, if a secondary dormancy is not induced by transferring the seeds of which dormancy was broken in wetting condition into drying condition. To investigate its validity, two experiments were carried out on seeds of 9 weed species ; to find out the most effective storage condition in breaking the dormancy of each weed species and to know whether there is a decrease in the germinability by transferring into drying storage condition. The dormancy of Chenopodium album and Stellaria aquatica was released well under the drying condition, but that of Echinochloa crus-galli var. oryzicola by soaking in water. Other weed species were released from dormancy by storage in wetting condition. When the seeds stored in the wetting or soaking condition, are air-dried and then restored at room or low temperature, a decreasing tendency of germinability which might cause a trouble in using them practically, was not observed except on the seeds of Persicaria vulgaris. In the case of Persicaria vulgaris, the low germination since 3 month-storage seemed not to be caused by drying, because a decrease of its germinability was observed with increasing storage period in all of the storage conditions. In contrast, high germination was induced as the seeds of Echinochloa crusgalli var. oryzicola, which were not germinated during the storage in low temperature and wetting condition, were transferred into the room temperature and drying condition. These results suggest that this approach can be one of the efficient methods for keeping a good germinability as long as possible in most weed seeds.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.344-352
• /
• 2019

Drought stress caused by global climate change is a serious problem for rice cultivation. Increasingly frequent abnormal weather occurrences could include severe drought, which could cause water stress to rice during the seedling stage. This experiment was conducted to clarify the effects of drought during the seedling period on yield and quality of rice. Drought conditions were created in a rain shelter house facility. The drought treatment was conducted at 3, 10, and 20 days after transplanting. Soil water content was measured by a soil moisture sensor during the whole growth stage. In this study, we have chosen 3 rice cultivars which are widely cultivated in Korea: 'Haedamssal' (Early maturing), 'Samkwang' (Medium maturing), and 'Saenuri' (Mid-late maturing). The decrease in yield due to drought treatment was most severe 3 days after transplanting because of the decrease in the number of effective tillers. The decrease in grain quality due to drought treatment was also most severe 3 days after transplanting because of the increased protein content and hardness of the grains. The cultivar 'Haedamssal' was the most severely damaged by water stress, resulting in about a 30% yield loss. Drought conditions diminished the early vigorous growth period and days to heading in early-maturing cultivars. The results show that drought stress affects yield components immediately after transplanting, which is a decisive factor in reducing yield and grain quality. This study can be used as basic data to calculate damage compensation for drought damage on actual rice farms.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.125-133
• /
• 2011

This study was conducted on greenhouses whose side heights had been raised after the columns of 1-2W basic type greenhouses had been cut and welding with the same-sized pipes. When the wind load or snow load affects restructured pipe greenhouse like this, those parts will be structurally unsafe. To examine this, the bending strength of welded columns were measured through four stages and compared with the pipes in their original condition. Results are as follows. In the case of a bending test on welded joints about steel pipes used for greenhouses, satisfactory results couldn't be drawn because sections of both ends and the loading parts couldn't endure loads and sank regardless of loading methods. Partial problems could be solved by inserting inside pipe(steel bar) at the sections and the loading parts, but it was necessary to devise more satisfactory bending test methods. The strength of welded joints wasn't much different compared with original conditions and demonstrated only slight differences according to the sample production conditions. However, significant incompleteness in the welding process was expected to cause a decisive loss in strength. On the assumption that there were no problems in the welding process or with regard to the inclination of sub materials for columns after connection, it was deemed reasonable to assume that the strength of welded pipes was about 84~90% of the strength of the pipes in their original condition. Considering mid- and long-term strength decline following the onset of rust at joints or welding sections, structural changes in the main sub materials that are used for greenhouses at farmhouses have to be avoided to ensure structural safety, unless these changes are inevitable.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.43-52
• /
• 2021

In this study, the optimal nitration process for selective lithium leaching from powder of a spent battery cell (LiNi_xCo_yMn_zO₂, LiCoO₂) was studied using Taguchi method. The nitration process is a method of selective lithium leaching that involves converting non-lithium nitric compounds into oxides via nitric acid leaching and roasting. The influence of pretreatment temperature, nitric acid concentration, amount of nitric acid, and roasting temperature were evaluated. The signal-to-noise ratio and analysis of variance of the results were determined using L₁₆(4⁴) orthogonal arrays. The findings indicated that the roasting temperature followed by the nitric acid concentration, pretreatment temperature, and amount of nitric acid used had the greatest impact on the lithium leaching ratio. Following detailed experiments, the optimal conditions were found to be 10 h of pretreatment at 700℃ with 2 ml/g of 10 M nitric acid leaching followed by 10 h of roasting at 275℃. Under these conditions, the overall recovery of lithium exceeded 80%. X-ray diffraction (XRD) analysis of the leaching residue in deionized water after roasting of lithium nitrate and other nitrate compounds was performed. This was done to determine the cause of rapid decrease in lithium leaching rate above a roasting temperature of 400℃. The results confirmed that lithium manganese oxide was formed from lithium nitrate and manganese nitrate at these temperatures, and that it did not leach in deionized water. XRD analysis was also used to confirm the recovery of pure LiNO₃ from the solution that was leached during the nitration process. This was carried out by evaporating and concentrating the leached solution through solid-liquid separation.

• (The) Research of the performance art and culture
• /
• no.36
• /
• pp.327-363
• /
• 2018

This paper tracks the present state of the Gugak educational programs run by Gugak-specialized museums including Museum of Gugak not only to set a directionality of Museum of Gugak to step forward for their main purposes, but also to find measures to invigorate its Gugak educational programs. There are 826 museums registered in 2016 nationwide, and ten of them are Gugak-specialized museums including Museum of Gugak. An analysis of the educational programs by Museum of Gugak presents high achievements in concentrativeness, participation and satisfaction levels. However, several issues such as difficulty level adjustment, education period arrangement, contents development, setting of a precise aim of education, and overcoming of regional limitations are to be solved in the future. Considering these special circumstances, the study suggests setting a directionality of Gugak education by following four conditions: Firtly, the Gugak education programs by Museum of Gugak should be user-oriented. Secondly, it is necessary to provide customized learning programs to suit users of various ages and generations. Thirdly, a solid education is required to enhance creativity deviating from uniform, unilateral, fragmentary education focused on materials and relics of museums as the users' experiences and learning levels vary. Fourthly, integrated education with relevant study in common use is required as the specialized environments of the museum could cause users psychological resistance and lessen their willingness to approach. Focusing on these four conditions several invigoration measures for the Gugak education programs are discussed: Firstly, a step-by-step approach, not a radical shift, is required in order to turn existing programs into the user-oriented. Secondly, customized learning programs should be planned in consideration of life cycle of the users. Thirdly, it is necessary to establish virtuous circulation reflecting activity-based contents as well as to provide the users experiences through five senses for solid Gugak education, in which various elements such as experiencing, learning, playing, viewing are reflected manifoldly. Fourthly, integrated education can be implemented when the features of Gugak educational programs are internally structured and the external environment matures.