• 전기의세계
• /
• 제14권5호
• /
• pp.8-14
• /
• 1965

Because of the flat slope of the magnetic characteristic curves at high saturation, the transformer inrush current peakes may assume an extreme magnitude. Even though such is rarely any danger to the transformer itself, the currents can cause serious problems in associated apparatus. This paper has analyzed various limiting factors of excess inrush currents, and then has suggested how to determine the frequency of encountering the inrush current peaks higher than an arbitrarily chosen value by deriving the probability equations of inrush current occurrence.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.267-270
• /
• 2002

Downlink Shared Channel (OSCH) is used for high-speed packet service transmission in WCOMA. The power-controlled performances of the OSCH are studied through simulation works. Under various channel conditions and mobile speeds, the simulation results show that current power control scheme in WCDMA, especially for the OSCH power control, has some problems. In this paper, cause of problems is revealed. Also, the quantitative result related to the OSCH power control problem is analyzed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.517-522
• /
• 2002

This study was carried out to understand the cause and processes of a reactivated landslide that occurred in Gonmyeong-myeon, Sacheon City, Kyeongsangnam-do. For the study, geologic mapping, geophysical exploration, boring, laboratory testing, and slope stability analyses were conducted. The landslide area has geologic conditions that are prone to slope failure, due to the past landslide. The trigger that caused the landslide was removal of lateral support by excavation of the toe of slopes.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.226.2-226.2
• /
• 2003

The FimH subunit of type 1-fimbriated Escherichia coli has been determined as a major cause of urinary tract infection. To produce a possible vaccine antigen against urinary tract infection, the fimH gene was genetically linked to the Itxa2b gene, which was then cloned into the pMAL -p2E expression vector. The chimaeric construction of pMALfimH/Itxa2b was transformed into Escherichia coli TB1 and its N-terminal amino acid sequence was analyzed. (omitted)

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권6호
• /
• pp.519-522
• /
• 2004

In the course of anaerobic storage of excess sludge, odors due to chemicals such as hydrogen sulfide are produced. These odors cause many problems. Many methods have been developed to eliminate odors, but all current methods are not only costly, but also largely inef­fective. In this paper, we investigate the process of transformation of sludge microorganism cul­tures through intense aeration under nutrient-poor conditions, in terms of the selective adjust­ment and control of microorganism culture. The aerated sludge is subsequently returned to the adjusting pool, where the microorganisms inhibit odors, thus the excess sludge itself will act as an odor inhibitor. The process can be verified in terms of viability, in that the degradation capac­ity of the sludge was maintained after the intensely-aerated sludge was returned to the treat­ment system.

• 한국한의학연구원논문집
• /
• 제1권1호
• /
• pp.101-125
• /
• 1995

The terminology used for oriental medicine has not yet been standardized so far and this might cause the problems in developing theories and clinical research of oriental medicine. To establish scientific backgroupd of oriental medicine, it is required that all the terminology used for oriental medicine should be standardized and unified. For more efficient oriental medical practice, the standardization, unification of the terms and conditions used for diagnosis in oriental medicine should be achieved. The aim of this study are as follows; 1. To provide clear and logical systems for the diagnosis of symptoms and diseases. 2. To provide the theoritical clearmess of oriental medicine and to promote the public facilities for study. 3. To provide ways of idea exchange and understanding between oriental medicine and various biological sciences. 4. To provide practical basis for hospital administration for oriental medicine.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.9-16
• /
• 2004

Close-coupled catalyst (CCC) can reduce the engine cold-start emissions by utilizing the energy in the exhaust gas. However, in case the engine is operated at high engine speed and load condition, the catalytic converter may be damaged and eventually deactivated by thermal aging. Excess fuel is sometimes supplied intentionally to lower the exhaust gas temperature avoiding the thermal aging. This sacrifices the fuel economy and exhaust emissions. This paper describes the results of an exhaust heat exchanger to lower the exhaust gas temperature mainly under high load conditions. The heat exchanger was installed between the exhaust manifold and the inlet of close-coupled catalytic converter. The exhaust heat exchanger successfully decreased the exhaust gas temperature, which eliminated the requirement of fuel enrichment under high load conditions. However, the cooling of the exhaust gas through the heat exchanger may cause the deterioration of exhaust emissions at cold start due to the increment of catalyst light-off time.

• 한국주조공학회지
• /
• 제25권4호
• /
• pp.173-178
• /
• 2005

The vacuum molding process is one of the clean-foundry molding-processes that can recycle molding sands repeatedly, because molding can be accomplished by introducing vacuum only among dry molding sands in flask. The effects of molding conditions such as sand grain fineness, vacuum pressure and coating thickness on the fluidity of A356 Al alloy were studied and the results was obtained that the fluidity length was decreased as the sand grain fineness number and coating thikness were decreased and the vacuum pressure was increased. A large amount of heat removal from the molten metal resulting from the vacuum suction during the vacuum molding process was the principal cause of this decrease in fluidity.

• 열처리공학회지
• /
• 제22권2호
• /
• pp.80-87
• /
• 2009

Effects of retained austenite contents on ductility of medium carbon spring steels according to steel alloy compositions and heat treatment conditions were studied. Contents of retained austenite varied with steel compositions and heat treatment conditions, and some retained austenite were found to transform to martensite on stress. Reduction of area (RA) increased with contents of retained austenite, then saturated through its maximum, and subsequently decreased. Increase in RA with retained austenite contents could be due to crack blunting effect by retained austenite on stress, however, more contents of martensite transformed from retained austenite in its higher contents could cause decrease in RA.

• Journal of Welding and Joining
• /
• 제35권1호
• /
• pp.68-73
• /
• 2017

During welding of Ni based superalloy, hot cracking was usually happen in the fusion zone of a weld. In this study, the laser weldability of Inconel 713C alloy for the turbocharger wastegate valve (WGV) was evaluated with various welding conditions, such as laser power, welding speed, shielding gas. Welding conditions were optimized by bead-on-plate (BOP) and butt joint welding. For the evaluation of laser weldability, bead shapes and weld microstructures were investigated and tensile test was conducted. The fracture surfaces were investigated for the understanding the cause of the fracture.