Five type of formulated diet from agricultural by-products (ABP) were fed to four breedtype of cattle in feedlot. The ABP used are palm kernel cake (PKC), palm press fibre (PPF), palm oil mill effluent (POME), cocoa pod (COP), coffee pulp (COF) and pineapple waste (PAP). The formulated diets are PS (52% PKC, 15% PPF and 30% POME), PF (57% PKC, 20% PPF and 20% POME), PA (2% PKC and 55% PAP), CO (42% PKC and 55% COP) and CF (67% PKC and 30% COF) with 1% urea, 1% NaCl and 1% vitamins premix. The cattle breedtypes are Kedah-Kelantan (KK), Brahman-KK (BK), Hereford-KK (HK) and Sahiwal-Friesian (SF). The result showed that breedtype significantly affect all the carcass characteristic except dressing percentage. Each breedtype has it's specific carcass characteristics. HK cattle gave high marbling, BK has high % of carcass bone, KK has high % of carcass meat and low % of carcass fat (lean meat type) and SF has high % of carcass fat. Diet-type significantly affect the deposition of fat in the carcass. High moisture diets (PA and CO) produced significantly higher % carcass bone, the lowest % carcass fat and the highest % carcass meat (65.3%). PF, CF, PA and CO diets produced 63.4%, 59.9%, 55.3% and 54.1% carcass meat respectively.
Leptin, the product of the obesity (ob) gene, is synthesized in adipocytes or fat cells and has been implicated in the regulation of food intake, energy balance and body composition in mammals. Therefore, the leptin gene could be a candidate gene controlling fat deposition, meat quality and carcass traits in cattle. In this study the microsatellite genotypes for leptin gene were determined and their effects on carcass traits and meat quality were estimated in Korean cattle. Six different microsatellite alleles within leptin gene were identified and gene frequencies of 173, 177, 184, 186, 190 and 192 bp alleles were 0.012, 0.308, 0.067, 0.260, 0.342 and 0.016, respectively. The microsatellite marker of the leptin gene showed a significant association with the carcass percentage (CP) and marbling score (MS). Animals with genotypes 192/192 and 177/184 had higher CP than animals with other genotypes. Animals with genotypes 184/192 and 177/184 had higher MS compared with animals with other genotypes. Thus, the results suggest that the 177, 184 and 192 bp alleles may be associated with increased carcass percentage and intramuscular fat levels. No associations were found between the microsatellite genotypes of the leptin gene and other carcass traits such as carcass weight (CW), backfat thickness (BF) and M. longissimus dorsi area (LDA). In conclusion, the microsatellite markers of the leptin gene may be useful for marker-assisted selection of carcass traits and meat quality in Korean cattle.
Ogino, A.;Kaku, K.;Fujita, T.;Kitamura, C.;Shimada, K.
Asian-Australasian Journal of Animal Sciences
/
v.16
no.5
/
pp.635-638
/
2003
Japanese Black cattle (Wagyu) are fed for a long period to produce high quality beef, however, extended feeding often causes inefficiency and greater environmental load mainly derived from their manure. The objectives of this study were to analyze changes in feeding length by listing breeding values (BVs) at calf markets and the relationships between BVs and carcass characteristics of 4,052 Japanese Black cattle, and to examine the feasibility of optimizing feeding length by referring to listed BVs. BV classes A, B, and C were defined based on BVs of cows in Shimane Prefecture as follows: an upper quarter of BVs was classified as A, a second quarter as B, and under the average as C. For cattle sold at calf markets in the first term of 1996, just before the start of BV listing, the feeding length of cattle with class B BVs for the beef marbling standard (BMS) was longer (p>0.05) than that of class A cattle. However, in the second term of 1996, just after the start of BV listing, the feeding length of class B cattle became shorter (p<0.001) than that of class A cattle. Then, the feeding lengths of both classes showed no significant differences. Feeding lengths of both class A and B BVs for carcass weight (CW) changed similarly to the corresponding BV classes for BMS. The analysis of the relationships among the listed BV classes and the actual carcass characteristics showed that class A cattle had a higher (p<0.001) BMS than class B cattle, and that the higher-class cattle had a heavier CW (p<0.05). On the basis of previous reports, the cattle, particularly those with lower genetic marbling ability, seem to only increase marbling at markedly low efficiency for a few months before slaughter. Therefore, the finding that carcass characteristics corresponded to their class of BVs suggests that an optimum feeding length based on listed BVs not only increases the efficiency of beef production, but also reduces the environmental load.
Kitamura, C.;Yasuda, Y.;Kobayashi, T.;Nomura, T.;Shimada, K.
Asian-Australasian Journal of Animal Sciences
/
v.12
no.6
/
pp.843-845
/
1999
To evaluate direct and maternal effects on calf market weight (CMW) and carcass weight (CW) in Japanese Black cattle under an animal model, genetic parameters were estimated using 51,320 records of CMW and 11,944 records of CW, respectively. Direct and maternal heritabilities, and direct-maternal genetic correlation were estimated to be 0.22, 0.06 and 0.27 for CMW, and 0.23, 0.12 and -0.40 for CW, respectively. Correlation coefficient between maternal breeding values for CMW and CW was 0.521 for 157 sires appeared in both CMW and CW data sets. These results suggest that the maternal genetic effect on pre-weaning growth carries over to carcass weight. Maternal breeding values for both calf market weight and carcass weight could be used as the indicator traits of maternal ability in Japanese Black cattle.
Distribution of wholesale carcass cuts and tissues was studied in Omani Dhofari bulls and steers raised under intensive management and slaughtered over a range of 110 to 210 kg body weight. The fore quarter of Dhofari cattle carcasses was heavier than the hind quarter with the chuck being the heaviest cut in the half carcass followed by the round whereas the flank was the lightest cut. Proportions of the fore quarter and its cuts increased whereas that of the hind quarter and its cuts decreased with increasing carcass weight. The fore quarter contained higher proportions of carcass tissues especially intermuscular fat than the hind quarter. The chuck and round contained the highest proportions of lean and bone and the flank the least. There was a general trend of increasing proportions of fat and decreasing proportions of lean and bone in carcass cuts and fore and hind quarters with increasing slaughter weight and age. As % total body fat (TBF), total carcass fat (TCF) increased whereas total non-carcass fat (TNCF) decreased. The largest proportion of TBF was deposited in the intermuscular site. Among the TNCF depots, the kidney and omental contributed the highest proportions whereas the pelvic and channel were the lowest. Proportions of M. rhomboideus and M. splenius increased in the half carcass whereas that of M. semitendinosus decreased as the cattle increased in size. The axial skeleton contributed 47.4-51.1, the fore limb 21.6-22.6 and the hind limb 23.9-26.2% of the total carcass bone. Proportions of axial skeleton increased whereas that of fore and hind limbs decreased with increasing slaughter weight and age. There were no major effects of castration on the distribution of weight of carcass cuts or carcass tissues. Steers had higher total body fat at 160 kg body weight and higher proportions of mesenteric, scrotal, pelvic, kidney and total non-carcass fat at 210 kg weight than bulls. As % of total body fat, steers fad significantly higher kidney and total non-carcass fat. There was little effects of castration on proportions of dimensions of individual muscles or bones.
Leptin is the hormone product of the obese gene and is synthesized and secreted predominantly by white adipocytes and relates to the feedback system that regulates long-term body fat weight and composition. Therefore, the leptin gene could be an excellent candidate gene controlling fat deposition, carcass traits and meat quality in beef cattle. The objective of this study was to evaluate the association of 3 SNPs (A1127T and C1180T in exon 2 and C3100T in exon 3) in the bovine leptin gene with carcass and meat quality traits in Korean cattle. The C1180T SNP was associated with backfat thickness (BF) and marbling score (MS) (p<0.05). Animals with the genotype CC had higher BF than animals with TT genotype and higher MS compared with CT and TT genotypes. No significant associations were observed between the C3100T SNP and any carcass and meat quality traits analyzed. The effect of the A1127T SNP was not analyzed because the TT genotype was not detected and the AT genotype showed only 1.0% frequency. These results suggest that the C1180T SNP of the leptin gene may be useful as a genetic marker for carcass and meat quality traits in Korean cattle.
Recently, a high level of dietary crude protein (CP) has become of interest as a possible practice to improve the carcass quality of beef cattle, and its level has been increasing in the field. However, there is little scientific evidence that supports this. This study was conducted to test whether a high dietary CP level would improve growth performance, body metabolism, and carcass traits in Hanwoo beef cattle. A total of 32 Hanwoo finishing beef cattle (18 multiparous cows, six heifers, and eight steers) participated in a 12-weeks feeding trial. Two kinds of total mixed rations were prepared to contain two different CP; 156 g/kg for the control (CON) and 173 g/kg of CP for the treatment (HCP), while maintaining a similar level of metabolizable energy. The experiment was ended when more than half of the steers reached the target body weight (730 kg). Blood was collected at the end of the experiment. After harvesting, the carcass trait was evaluated at the slaughterhouse according to Korean standards. The carcass yield score and grade were also calculated based on revised criteria. Overall, dry matter intake, average daily gain, blood metabolites concentration, and the carcass traits, except for backfat thickness and the yield score, did not differ between the treatments. The HCP had lower backfat thickness than those of CON. There was no difference in the carcass yield grade, but the yield score was higher in the HCP treatment. According to the newly revised carcass grading criteria, both yield score and grade were higher in HCP than in CON. Increasing CP supply decreased the carcass's backfat thickness without altering growth performance and body metabolism, resulting in improved yield score and grade. Therefore, feeding a high CP diet may be beneficial in the farm income, although it may also increase feed cost and nitrogen excretion to the environment.
Leptin has been investigated as a candidate gene for fat characteristics in beef cattle. Previously, we have reported 57 sequence variants discovered in Korean cattle (Bos Taurus coreanae). In this study, we examined the association between polymorphisms of leptin and carcass traits (cold carcass weight (CWT) and marbling score (Marb)) in Korean cattle. Among 57 polymorphisms, 11 common polymorphic sites were genotyped in our beef cattle (n = 437). Statistical analysis revealed that one single nucleotide polymorphism in coding exon (c.+411T>C (A137A)) showed a significant association with the yield trait, CWT. The C-bearing genotypes (CC or CT) of c.+411T>C (A137A) showed the higher CWT (p = 0.006). c.+150C>G (S50S) also showed a significant association with the quality trait, Marb (p = 0.01). Our findings suggest that polymorphisms in leptin might be one of the important genetic factors that influence carcass yield and quality in beef cattle, especially in CWT and Marb.
Objective: The objective of this study was to compare growth performance, carcass traits and meat quality in young bulls, steers and heifers produced by crossing Limousin bulls with Holstein-Friesian cows, fattened semi-intensively and slaughtered at 18 months of age. Methods: Thirty-one young calves were reared in a conventional production system, and were fed milk replacer, hay and concentrate. At 6 months of age, the animals were divided into groups based on gender, and were fed a total mixed ration composed of grass silage, concentrates I and II in a semi-intensive production system. At the end of the fattening period (18 months), the animals were slaughtered, carcass quality was evaluated, and samples of musculus longissimus thoracis were collected to determine the proximate composition and quality of meat. Results: Bulls were characterized by the highest percentage share of the most valuable cuts in the carcass, and three-rib sections from bull carcasses had the highest lean meat content with low intramuscular fat content (0.93%). No significant differences in carcass conformation, dressing percentage or the percentage share of round in the right half-carcass were found between bulls vs. steers and heifers. Heifers and steers had higher carcass fat content than bulls, which had a positive influence on the sensory properties of beef. In comparison with the meat of bulls, the meat of steers and heifers was characterized by more desirable physical properties and sensory attributes (water-holding capacity, shear force, color lightness, aroma, juiciness, tenderness, flavor). Conclusion: Under the semi-intensive production system, heifers and steers had higher carcass fat content than bulls, which had a positive effect on the sensory properties of beef. Bulls are better suited for intensive systems, which contribute to improving the quality of their meat. The results of this study may encourage producers to breed steers and heifers for beef.
Two experiments were carried out to investigate the relationship of slaughter age and carcass traits of Hanwoo cattle. A total number of 11,284 heads of cattle (4,624 bulls, 6,120 steers, and 540 females) were used in the experiment (Exp.) 1. In the Exp. 2, 3,887 heads of steers slaughtered at age of 24-36 mon were used. After 24 h post-slaughter chilling, the carcasses were weighed and evaluated by an official grader of carcass traits according to the Korean carcass grading standard. Backfat thickness was the main variable in yield index and grade whereas marbling score was the main variable in carcass quality grade. Meat color was an important factor affecting carcass quality grade of bulls; fat color was an important factor affecting those of steers and females; and maturity was an important factor affecting that of females. After 24-mon-old, extension of slaughter age did not automatically increase the quantity and quality of meat. However, 29 mon of age can be regarded as the optimum time to slaughter steers to attain the highest take home money for farmers.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.