• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1737-1741
• /
• 2008

Dielectrophoretic behavior of semiconducting single-walled carbon nanotubes(SWNT) was investigated theoretically and experimentally. The surface conductance of nanotubes was modulated using anionic and cationic surfactant mixtures. The experimental results indicate that dielectrophoretic behavior of SWNT highly depends on the procedure of mixing two opposite-charged surfactants. Clausius-Mossotti factor was calculated by measuring zeta potentials and solution conductivity. Raman spectroscopy was used to characterize the dielectrophoretically deposited nanotubes arrary. We found that metallic nanotubes were selectively separated from the nanotubes suspension, resulting from modulation of surface conductance of semiconducting SWNT.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.150-153
• /
• 2009

Anion exchange polymer electrolyte pore-filling membranes consisting of the whole hydrocarbon materials were prepared by photo polymerization with various quaternary ammonium cationic monomers and characterized on the properties for applying to solid alkali fuel cell (SAFC). Hydrocarbon porous substrates such as polyethylene were used for the preparation of the pore-filling membranes. The hydroxyl ion conductivity of the polymer electrolyte membranes prepared in this research was dependent on the composition ratio of an electrolyte monomer and crosslinking agents used for polymerization. Furthermore, these pore-filling membranes have commonly excellent properties such as smaller dimensional affects when swollen in solvents, higher mechanical strength, lower fuel crossover through the membranes, and easier preparation process than those of traditional cast membranes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2146-2148
• /
• 1999

The purpose of this study is to find the way to reduce the electrostatics by interface activation substances added in the insulating oil with concentration[ppm]. As results. The streaming current, surface tension and viscosity of the samples added nonionic and hermaphrodic substances are decreased but the conductivity is increased at higher point than the 1[ppm] (c.m.c.), the other side the same phenomena of the samples added cationic and anionic substances are discovered at the 10[ppm].

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 춘계 총회 및 학술발표회
• /
• pp.57-60
• /
• 2004

Polymer electrolyte membranes have been studied widely in chloro-alkali electrolysis, cationic exchange resins, and fuel cell applications. Especially, sulfonated polyimide membranes have been suggested as a potential polymer electrolyte in PEMFC due to their excellent thermal stability and high proton conductivity.(omitted)

• Macromolecular Research
• /
• 제13권5호
• /
• pp.385-390
• /
• 2005

The electrospinning process is a fascinating method to fabricate small nanosized fibers of diameter several hundred nanometers. Surfactant-polymer solutions were prepared by adding poly(vinyl alcohol) (PVOH) to distilled water with cationic, anionic, amphoteric, and non-ionic surfactants. Average diameter of the electrospun PVOH fibers prepared from PVOH solution was over 300 nm, and was decreased to 150 nm for the mixture of PVOH/amphoteric surfactant. To explain the formation of ultra fine fiber, the characteristic properties in a mixture of PVOH/surfactant such as surface tension, viscosity, and conductivity were determined. In this paper, the effect of interactions between polymers with different classes of surfactants on the morphological and mechanical properties of electrospun PVOH nonwoven mats was broadly investigated.

• 대한화장품학회지
• /
• 제14권1호
• /
• pp.16-37
• /
• 1988

A new quaternary ammonium compound, hydrolyzed ginseng-sapoin quaternary (HGSQ), from hydrolyzed Korean ginseng-saponin and 2, 3-epoxypropyltrimethyl ammonium chloride has been developed as a conditioning agent for hair care products. This structure has the hydrophilic group from the introduced cationic and the hydrophobic group from the aglycone of ginseng saponin. Its properties: surface tension, conductivity, critical micelle concentration, eye irritation, sorption onto hair, force reduction (%) for 20% extension and moisture retention effect comparing with the commercial standards. Also half-head tests of HGSQ-containing shampoo were carried out to compare the conditioning effects in shampoos.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.24-30
• /
• 2006

This study was performed to characterize inverse emulsion type cationic polyacrylamide (PAM) and to compare with powder and salt dispersion type PAMs as a retention and drainage aid. Salt dispersion type PAM has defects of high amount of salt which increases conductivity of white water, low active polymer contents and relatively worse retention and drainage properties than others because of its low molecular weight. Powder type PAM has benefit of high active polymer contents and good retention and drainage properties, but defects of low dissolution speed and insoluble particle generation were observed. However, inverse emulsion type showed the best retention and drainage aids among them by controlling molecular weight and morphology easily and it had relatively higher active polymer contents and better solubility.

• Macromolecular Research
• /
• 제16권3호
• /
• pp.204-211
• /
• 2008

A platinum-catalyzed polyelectrolyte porous membrane was prepared by solid-state compression of electrospun polystyrene (PS) fibers and in-situ metallization of counter-balanced ionic metal sources on the polymer surface. Using this ion-exchange metal-polymer composite system, fiber entangled pores were formed in the interstitial space of the fibers, which were surrounded by sulfonic acid sites ($SO_3^-$) to give a cation-selective polyelectrolyte porous bed with an ion exchange capacity ($I_{EC}$) of 3.0 meq/g and an ionic conductivity of 0.09 S/cm. The Pt loading was estimated to be 16.32 wt% from the $SO_3^-$ ions on the surface of the sulfonated PS fibers, which interact with the cationic platinum complex, $Pt(NH_3)_4^{2+}$, at a ratio of 3:1 based on steric hindrance and the arrangement of interacting ions. This is in good agreement with the Pt loading of 15.82 wt% measured by inductively coupled plasma-optical emission spectroscopy (ICP-OES). The Pt-loaded sulfonated PS media showed an ionic conductivity of 0.32 S/cm. The in-situ metallized platinum provided a nano-sized and strongly-bound catalyst in robust porous media, which highlights its potential use in various electrochemical and catalytic systems.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.679-687
• /
• 2013

4-클로로벤조산의 가용화현상을 이용하여 순수양이온성 계면활성제(DTAB, TTAB, CTAB), 비이온성 계면활성제(Tween-20, Tween-40, Tween-80) 및 이들 혼합계면활성제(TTAB/Tween-20, TTAB/Tween-40, TTAB/Tween-80)의 임계미셀농도(CMC)값과 반대이온 결합상수값(B)를 온도 284 K에서 312 K까지 변화를 주면서 UV/Vis 분광광도법과 전도도법으로 측정하였다. 온도에 따른 CMC와 B값의 변화를 측정하여 미셀화현상에 대한 여러 가지 열역학 함수값(${\Delta}G^o{_m}$, ${\Delta}H^o{_m}$, 및 ${\Delta}S^o{_m}$)을 계산하고 분석 하였다. 그 결과 측정범위 내에서 ${\Delta}G^o{_m}$값은 모두 음의 값을 나타내었다. 그러나 ${\Delta}H^o{_m}$과 ${\Delta}S^o{_m}$값은 계면활성제의 종류와 계면활성제분자에서 탄소사슬의 길이에 따라 양의 값 혹은 음의 값을 나타내었다.

• 대한화학회지
• /
• 제42권5호
• /
• pp.519-525
• /
• 1998

양이온성 계면활성제인 DPC(dodecylpyridinium chloride)와 다른 양이온성 계면활성제인 DTAB(dodecyltrimethylammonium bromide), TTAB(tetradecyltrimethylammonium bromide) 및 CDEAB(cetyldimethylethylammonium bromide)와의 혼합마이셀화를 연구하기 위하여 전도도법을 이용하였다. DPC/DTAB, DPC/TTAB 및 DPC/CDEAB 혼합계면활성제의 마이셀화에 대한 임계마이셀농도$(CMC^{\ast})$와 반대이온의 결합상수값(B)을 각각 ${\alpha}$1(DPC의 몰분율)의 함수로서 25$^{\circ}C$에서 측정하였으며, 이와같이 측정한 $CMC^{\ast}$와 B 값으로부터 유사상태분리모델을 적용함으로써 여러 가지 열역학적 함수값$(X_{i},\;{\gamma}_{I},\;C_{i},\;a^{M}_{i},\;\beta,\;{\Delta}H_{mix},\;and\;{\Delta}G^{o}_{m})$을 계산하고 분석하였다. 그 결과 DPC/CDEAB 혼합계면활성제가 이상적 혼합마이셀모델에서 가장 큰 벗어남을 나타내었으며 DPC/DTAB 혼합계면활성제는 가장 작은 벗어남을 보였다.