• Journal of the Korean Society of Clothing and Textiles
• /
• v.2 no.1
• /
• pp.167-176
• /
• 1978

The effect of additives in final rinse water during laundering on soiling, soil removal and some properties of fabrics has been studied with various fabrics. The additives examined were fabric softener (Sta-Puf), cationic surfactant (Apole PS), sizing materials such as CMC, PYA, cornstarch and mixture of CMC and cationic surfactant. The results obtained may be summerized as follows. L Addition of additives except PVA in final rinse water generally reduce the deposition of carbon-$CCl_4$ soil and it seems to be rather independant of the concentration of additives. The effect of additives on soil resistant is found to increase in the following order. cotton; Apole

• Applied Biological Chemistry
• /
• v.49 no.1
• /
• pp.70-76
• /
• 2006

Purecell, hydroxyethyl-cellulose-2-hydroxypropyltrimethyl ammonium chloride ether, was developed as a thickener and evaluated its functions for stability and safety when it was added in the cosmetic composition. Compared with a commercially available thickener Natrasol, Purecell have a basic chemical backbone of hydroxyethylcellulose which has been widely used in the cosmetic industry. pH and viscosity of Purecell was lower than those of Natrasol, however, a similar pH value to was shown when the Purecell was added into a shampoo or cream. The Purecell was stable to temperature and light. When 0.5% of the Purcell was added to a shampoo having cationic surfactant, a separation occurred due to the same cationic surfactant of the Purecell and shampoo. However, the shampoo and cream made with Purecell improved a smoothness and adaptability of hair. It also showed a negative response for Patch test of human, indicating the Purecell was safe for use.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.2
• /
• pp.133-138
• /
• 2012

The purpose of this study was to examine the correlation between physical properties of dried coacervate films and dry feel for shampoo composition. Simple shampoo compositions were made of two different cationic charge density polymers in the same surfactant compositions. The simple shampoo compositions were diluted with distilled water to make coacervate. Formed coacervate was collected by centrifuge (3,000 rpm, 30 min). Coacervate was coated on the glass plates and dried in drying oven (for 1 h, $50^{\circ}C$) to make the thin film. We carried out an experiment on measurement of contact angle, moisture loss ratio and SEM image analysis of the dried coacervate film. Dry feelings of the shampoos were evaluated by panel using hair tresses. Results show that the properties of dried coacervate films affect the dry feel of the after shampooing.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.157-162
• /
• 2002

A technique which could collect the traditional and the industrial hanji fibrous sludge efficiently from wastewater using a cationic surfactant cetyltrimethylammonium chloride (CTAC) was developed. When the concentration of CTAC was $1{\mu}g/mL$ in wastewater that the amount of the traditional hanji fibrous sludge was about 0.08 g/L, the collecting yield was more than 95% and the collecting time was less than 30 sec. When only CTAC was used to collect the industrial hanji fibrous sludge, about 90% of collecting yield was obtained at more than $15{\mu}g/mL$ CTAC. But the sludge layer at the surface of solution was not stabilized and the flotation time was relatively longer. And, when $5{\mu}g/mL$ CTAC and various amount of PAMID$^{(R)}$ was added to the industrial hanji sludge, the collecting yield was increased and sludge layer also was more stabilized. But the collecting yield was higher in the traditional hanji sludge than in the industrial hanji sludge.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.480-484
• /
• 2012

Concrete, the mixture of cement, sand, gravel and water, is a suspension substance extensively used to construct building materials. When a concrete mortar is applied to the underwater construction, the rheology of concrete is of great importance to its flow performance, placement, anti-washout and consolidation. In this research, the anti-washout and rheological properties of concrete have been investigated with concrete admixtures prepared by adding anionic surfactants, cationic surfactants, and polymeric thickeners. The concrete mortar formulated by pseudo-polymeric systems with the electrostatic association of anionic and cationic surfactants, showed high viscosities and suitable anti-washout properties, but poor pumpabilities. The addition of poly methyl vinyl ether to the mixed surfactant system exhibits synergistic effects by improving the concrete mortar properties of the concrete mortar such as fluidity, visco-elastic property, self-leveling, and anti-washout.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.382-388
• /
• 2004

The sizes and structures of micelles formed in aqueous solutions of cationic octadecyl trimethyl ammonium chloride (OTAC) and anionic ammonium dodecyl sulfate (ADS) surfactants were investigated using smallangle neutron scattering (SANS), self-diffusion coefficients by pulsed-gradient spin-echo (PGSE) NMR, and dynamic light scattering (DLS) methods. SANS and DLS data indicate that their structures are spherical at concentrations as high as 300 mM. As the total surfactant concentration increases, the peaks of SANS spectra shift to higher scattering vector and become sharper, indicating that the intermicellar distance decreases and its distribution becomes narrower. This is due to more compact packing of surfactant molecules at high concentrations. The intermicellar distance of around 100 ${\AA}$ above 200 mM corresponds approximately to the diameter of one micelle. The sizes of spherical micelles are 61 ${\AA}$ and 41 ${\AA}$ for 9 mM OTAC and 10 mM ADS, respectively. Also the self-diffusion coefficients by PGSE-NMR yield the apparent sizes 96 ${\AA}$ and 31 ${\AA}$ for micelles of 1 mM OTAC and 10 mM ADS, respectively. For ADS solutions of high concentrations (100-300 mM), DLS data show that the micelle size remains constant at $25{\pm}2{\AA}$. This indicates that the transition in micellar shape does not take place up to 300 mM, which is consistent with the SANS results.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.335-340
• /
• 2011

The solution properties of sodium n-dodecyl sulfate, as an anionic surfactant in the presence of a cationic watersoluble 5, 10, 15, 20-tetrakis (N-methylpyridinium-4-yl) porphyrin (TMPyP) has been comprehensively studied by means of conductometry, UV-vis and resonance light scattering (RLS) spectroscopies. The results represent the decreasing of critical micelle concentration of SDS solution due to increasing of TMPyP concentration. The stabilization of SDS micelle is due to neutralization of negative charge at the micelle surface. The presence of three different species of TMPyP in SDS solution has been unequivocally demonstrated: free porphyrin monomers, porphyrin monomers or aggregates bound to the micelles, and nonmicellar porphyrin/surfactant aggregates. Our results show SDS induced an aggregation in TMPyP. In fact two kinds of J-aggregations were observed: one of them for porphyrin monomers or aggregates bound to the micelles and the other for nonmicellar porphyrin/surfactant aggregates. However, the results represent the electrostatic interaction of TMPyP with SDS anion below the cmc.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.177-184
• /
• 1998

The contact angle on powder hydrophobic polymer PMMA(polymethylmethacrylate), PVC(poly vinyl chloride) and hydrophilic metal aluminium was measured by wicking method on the base of Washburn equation for water, glycerol, formamide, diiodomethane, 1,1,2,2-tetrabromoethane, 1-bromonaphthalene, acetone, chloroform, benzene, ethanol, methanol, and for anionic surfactant SDS(sodium dodecyl sulfate) and cationic surfactant CATB(cetyl trimethylamonium bromide) aqueous solution with concentrations. The values of ${\gamma}_c$ estimated by Zisman plot and adhesion tension plot for contact angle with organic liquids, SDS, and CTAB aqueous solutions were 43.5, 28.3, and $36.2mNm^{-1}$ for PMMA and 44.2, 25.0, and $34.8mNm^{-1}$ for PVC, respectively. From the results, it was considered that wettability and characteristics of solid surface were transformed by adding surfactant. The surface free energy, ${\gamma}_s$ and its components of PMMA, PVC, and aluminium were determined using harmonic equation.

• Environmental Engineering Research
• /
• v.19 no.1
• /
• pp.37-40
• /
• 2014

This research investigates the quality changes during composting of bagasse and pig manure amended with 30% of surfactant-coated charcoal (SC). Two treatments, 30% uncoated charcoal (UC) amendment and no charcoal (NC) amendment, were done as control. Charcoal was coated with 0.37 mM tetradecyltrimethylammonium bromide (TDMA), a cationic surfactant, at the dosage of 10 g/L. At the end of the composting period, the carbon to nitrogen (C/N) ratio of SC amendment was 9.7; whereas, the C/N ratios of UC and NC amendment were 12.6 and 21.4, respectively. Plant nutrients contents of the compost produced from SC amendment were 20.7 mg $NH_4{^+}-N/g$, 42.8 mg $NO_3{^-}-N/g$, and 41.7 mg P/g. High nitrate and phosphate concentrations in SC amendment were due to the adsorption of these anions on the positive charge of TDMA. Desorption of plant nutrients retained in the compost pellets was also investigated. It was predicted that nitrate was fully desorbed from a pellet at 23 days for SC amendment, which was later than UC (14 days) and NC (10 days) amendment. A slow release of nitrate from the compost pellet will reduce the nitrate leaching into the environment. Thus, the adding of SC in the compost pile is one of the alternative methods to improve the quality of compost and plant nutrient retention.

• Journal of the Korean Chemical Society
• /
• v.59 no.5
• /
• pp.379-386
• /
• 2015

The solubilization of p-chlorobenzoic acid in aqueous solutions of pure cationic, nonionic, amphoteric, and their mixed surfactant systems have been measured by the UV-Vis spectrophotometric method. The effects of hydrophobic tail-group with different chain length and the hydrophilic head-group on the solubilization of p-chlorobenzoic acid have been studied and also thermodynamic parameters have been calculated from the dependence of K_s values on the temperature. The results show that the values of ΔG^o for the solubilization by all surfactant systems are negative and the values of ΔH^o and ΔS^o are all positive.