• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.1-7
• /
• 2016

Triphenylsulfonium 양이온(TPS)은 잘 알려진 광산 생성자(photoacid generator, PAG)중 하나로 양이온성 중합반응(cationic polymerization)의 개시제로 널리 사용됐으며, 유기발광다이오드의 활성층, 폴리머 발광다이오드의 전자주입층을 구성하는 재료로도 사용되고 있다. TPS는 200nm 주변의 빛을 흡수하면 탄소-황 결합이 끊어져 페닐 라디칼과 diphenylsulfonium 양이온 라디칼로 분해되는 것이 알려져 있다. 본 연구에서는 밀도범함수이론과 시간의존 밀도범함수이론을 이용 triphenylsulfonium 이온의 광학적 특성을 조사하였다. 가장 안정한 구조를 기준으로 자외선 흡광 스펙트럼을 계산하였고, 실험값에 잘 맞는 것을 확인하였다. TPS의 빛에 의한 해리 과정을 알아보기 위해 페닐-황 결합 길이를 변화시키며 TPS의 흡광 스펙트럼을 계산, 여기상태 포텐셜 에너지 곡선을 구할 수 있었다. 결합의 분해에 이용되는 상태들은 주로 점유 분자 오비탈에서 최저준위 비점유 분자 오비탈(LUMO)로 들뜨는 성분을 가지고 있었는데, 이는 LUMO가 반결합성 오비탈이기 때문이다.

• Bulletin of the Korean Chemical Society
• /
• 제7권5호
• /
• pp.372-376
• /
• 1986

Substituted 3,4-dihydro-2H-pyrans ($1_{a-e}$) were prepared by (4 + 2) cycloaddition reaction of dimethyl dicyanofumarate with the corresponding electron-rich olefins. The compounds $1_{a-e}$ were ring-open polymerized by cationic initiators to obtain polymers of 1:1 alternating sequence. Polymerizations were carried out with boron trifluoride etherate in methylene chloride at $-78^{\circ}C$. All the polymers obtained were soluble in common solvents and were reprecipitated by pouring its chloroform solution into diethyl ether. All the compounds $1_{a-e}$ were not as reactive as the corresponding pyrans derived from ${\alpha}$ -cyanoacrylate.

• Bulletin of the Korean Chemical Society
• /
• 제9권3호
• /
• pp.176-179
• /
• 1988

3-Methoxy-4-cyano-2,9-dioxabicyclo[4.3.0]non-3-e ne (1) was prepared by (4 + 2) cycloaddition reaction of methyl ${\alpha}$-cyanoacrylate with 2,3-dihydrofuran. Compound 1 was ring-open polymerized by cationic catalyst such as boron trifluoride etherate to obtain alternating head-to-head (H-H) copolymer (2) of methyl $\alpha$ -cyanoacrylate and 2,3-dihydrofuran. For comparison, head-to-tail (H-T) copolymer (3) was also prepared by free radical copolymerization of the corresponding monomers. The H-H copolymer exhibited minor differences in its $^1H$-NMR and IR spectra, but in the $^{13}C$-NMR spectra significant differences were observed between the H-H and H-T copolymers. All of the H-H and H-T copolymers were soluble in common solvents and the inherent viscosities were in the range 0.2-0.3 dl/g.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.95-102
• /
• 2011

An amphiphilic cationic branched methoxy poly (ethylene glycol)-branched polyethylenimine - poly(L-phenylalanine) (mPEG-bPEI-pPhe) block copolymer was successfully synthesized by ring-opening polymerization (ROP) of N-carboxyanhydride of L-phenylalanine (Phe-NCA) with mPEG-bPEI for the preparation of more stable polyelectrolyte complex (PEC) included a hydrophobic interaction. mPEG-bPEI was firstly prepared by the coupling of mPEG and bPEI using hexamethylene diisocyanate (HMDI). The structural properties of mPEG-bPEI-pPhe copolymers were confirmed by $^1H$ NMR. The copolymers exhibited a self-assemble behavior in water above critical aggregate concentration (CAC) in the range of 0.01-0.14 g/L. The CAC of copolymers obviously depended on the hydrophobic block content in the copolymers (the value decreased with the increase of the pPhe block content). The cationic copolymers have the ability to form multi-interaction complex (MIC) with bovine serum albumin (BSA) and plasmid DNA through multi-interaction (electrostatic and hydrophobic interaction). The physicochemical characterization of the complex was carried out by the measurement of zeta potential and particle size. Their zeta-potentials were positive (approximately +10 mV) and their sizes decreased with increasing pPhe contents in the copolymers (PPF/BSA wt% ratio = 2). The complex showed good stability at high ionic strength. Therefore, mPEG-bPEI-pPhe block copolymer was considered as a potential material to enhance the stability of complex including biotherapuetic drugs.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권5호
• /
• pp.326-331
• /
• 2001

With the aim of developing of pH-sensitive controlled drug release system, a poly(Llysine) (PLL) based cationic semi-interpenetrating polymer network (semi-IPN) has been synthesized. This cationic hydrogel was designed to swell at lower pH and de-swell at higher pH and therefore be applicable for achieving regulated drug release at a specific pH range. In addition to the pH sensitivity, this hydrogel was anticipated to interact with an ionic drug, providing another means to regulate the release rate of ionic drugs. This semi-IPN hydrogel was prepared using a free-radical polymerization method and by crosslinking of the polyethylene glycol (PEG)-methacrylate polymer through the PLL network. The two polymers were penetrated with each other via interpolymer complexation to yield the semi-IPN structures. The PLL hydrogel thus prepared showed dynamic swelling/de-swelling behavior in response to pH change, and such a behavior was influenced by both the concentrations of PLL and PEG-methacrylate. Drug release from this semi-IPN hydrogel was also investigated using a model protein drug, streptokinase. Streptokinase release was found to be dependent on its ionic interaction with the PLL backbones as well as on the swelling of the semi-IPN hydrogel. These results suggest that a PLL semi-IPN hydrogel could potentially be used as a drug delivery platform to modulate drug release by pH-sensitivity and ionic interaction.

• 폴리머
• /
• 제27권5호
• /
• pp.429-435
• /
• 2003

양이온η$^3$-알릴 팔라듐 촉매를 사용하여 환상형 올레핀 단량체인 노보넨 (NB)과 5-비닐-2-노보넨(VNB)을 조성별로 비닐 부가 공중합하였다. 공중합체는 고수율과 고분자량 (M$_{w}$ > 760000)으로 얻을 수 있었다. VNB 함량이 많아질수록 공중합체의 분자량과 수득율은 감소하였으며, 첨가한 공단량체의 양과 공중합한 후 함유된 단량체의 양이 비례함을 FT-IR 분광분석으로 확인하였다. $^1$H-NMR 분석 결과 VNB는 exo, endo 이성체 모두 중합에 참여하는 것을 알 수 있었다. NB-VNB 공중합체의 분해 개시 온도는 약 300 $^{\circ}C$이었고, 열안정성은 VNB 함량과 관계없이 유사한 거동을 나타내었다. 합성된 NB-VNB 공중합체의 곁사슬 비닐기는 m-CPBA를 이용하여 에폭시화 하였고, 또한 9-BBN을 이용하여 수산화기를 도입하였다. 조성별 공중합체에 각각의 치환기가 도입된 것은 FT-IR, $^1$H-NMR 분석으로 확인하였다..

• 폴리머
• /
• 제35권1호
• /
• pp.40-46
• /
• 2011

The synthesis of well-defined poly(styrene-b-isobutylene-b-styrene) (SIBS) triblock copolymers was accomplished by cationic sequential block copolymerization of isobutylene (IB) with styrene (St) using 1,4-di(2-chloro-2-propyl) benzene (DCC) /$TiCl_4$/2,6-di-tert-butylpyridine(DtBP) as an initiating system in methyl chloride ($CH_3Cl$)/methylcyclohexane(MeChx) (50/50 v/v) solvent mixture at $-80^{\circ}C$. The triblock copolymers exhibited excellent thermoplastic and elastomeric characteristics. Tensile strengths and Shore hardness increased with increasing polystyrene (PS) content, while elongation at break decreased. The blood-compatibility of SIBS was assessed by SEM observation of the platelet adhesion, blood clotting time and haemolysis ratio. The haemolysis ratios were below 5% which met the medical materials standard. The platelet adhesion test further indicated that SIBS block copolymers had a good blood compatibility.

• 폴리머
• /
• 제32권1호
• /
• pp.43-48
• /
• 2008

본 연구는 벌크 중합을 이용하여 하이퍼브랜치 poly(styrene-co-divinylbenzene) (이하 PSD로 칭함)을 합성하고, 이를 설폰화하여 이온교환 용량이 큰 양이온 교환체를 합성하였다. 또한 FT-IR, $^1H-NMR$, 및 GPC 분석을 통하여 하이퍼브랜치 PSD 이온교환체의 분자량 및 구조 확인을 하였다. 하이퍼브랜치 PSD의 분자량과 점도는 DVB의 양이 증가함에 따라 모두 증가하였으며, 각각 최대값이 9410 g/mol과 338 cP로 나타났다. 또한, 가교제의 양이 증가함에 따라 반응속도가 증가하였으며, PSD의 용해도는 감소하였고, DVB 농도가 0.1 mlol%에서 용매 100 mL에 22g이 용해되었다. 또한, 하이퍼브랜치 PSD 이온교환체의 함수율과 이온교환 용량은 설폰 산기의 함량이 증가함에 따라 증가하였으며, 각각 최대 18.2%, 4.6 meq/g이었다. 구리 및 니켈에 대한 흡착이 40분 이내에 거의 100% 이루어졌다.

• 폴리머
• /
• 제37권1호
• /
• pp.94-99
• /
• 2013

폴리디아세틸렌(polydiacetylene, PDA)은 자기조립된 디아세틸렌(diacetylene) 단량체의 광중합에 의해 만들어진다. 디아세틸렌 단량체들이 조직적으로 배열되면 254 nm의 자외선 노광에 의해 1,4-첨가 중합이 일어나 고분자 주사슬에 이중결합과 삼중결합이 교대로 존재하는 폴리디아세틸렌이 만들어진다. 폴리디아세틸렌 수용액은 일반적으로 약 640 nm에서 최대흡수파장을 지니는 청색을 띠게 되며 여기에 온도나 pH의 변화, 다른 물질의 결합 등 외부 자극에 의해 약 550 nm의 최대 흡수 파장을 띠는 적색으로 색 전이가 일어나게 된다. 본 연구에서, 우리는 고체상 펩티드 합성을 이용하여 PCDA(10,12-pentacosadyinoic acid) 리포좀의 표면에 양이온성 올리고펩티드를 도입하였다. 또한 다양한 몰 비율로 리포좀 수용액을 제조하여 동물 세포에 트랜스펙션한 결과, 향상된 유전자 전달 효율과 낮은 독성을 보이는 것을 확인하였고, PCDA의 특성을 이용하여 세포에 처리 후 세포 관련 비표지 형광을 관찰하였다.

• Bulletin of the Korean Chemical Society
• /
• 제8권2호
• /
• pp.96-101
• /
• 1987

2-Ethoxy-6-methoxy-5-cyano-3,4-dihydro-2H-pyran (1_a$), 2-n-butoxy-6-methoxy-5-cyano-3,4-dihydro-2H-pyr an (1b), 2-isobutoxy-6-methoxy-5-cyano-3,4-dihydro-2H-py ran ($1_c$), and 2-ethoxy-6-methoxy-3-methyl-5-cyano-3,4-dihydro -2H-pyran ($1_d$) were prepared by (4 + 2) cycloaddition reaction of methyl $\alpha$-cyanoacrylate with the corresponding alkyl vinyl ethers. Compounds $1_{a-d}$ were ring-open polymerized by cationic catalyst to obtain alternating head-to-head (H-H) copolymers. For comparison, head-to-tail (H-T) copolymer $3_a$ was also prepared by free radical copolymerization of the corresponding monomers. The H-H copolymer exhibited minor differences in its $1_H% NMR and IR spectra, but in the $^{13}C$ NMR spectra significant differences were observed between the H-H and H-T copolymers. Glass transition temperature ($T_g$) of H-H copolymer was higher than that of the H-T copolymer, but thermal decomposition temperature of the H-H copolymer was lower than that of the H-T copolymer. Compounds $1_a$, $a_b$, and $1_c$, copolymerized well with styrene by cationic catalyst, but compound 1d failed to copolymerize with styrene. All of the H-H and H-T copolymers were soluble in common solvents and the inherent viscosities were in the range 0.2-0.4 dl/g.