• Journal of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.366-369
• /
• 1971

The cation exchange chromatographic method for the analysis of Babbitt metal has been studied. The quantitative separation of the mixture of Sb, Cu, Pb, and Sn ions has been obtained by elution, through 5cm column of resin, Rexyn 101 (Na form, 100~200 mesh), using 0.1 M NaCl solution for Sb, pH 4.5 and pH 7 solution of 0.01 M Na-Citrate + 0.1 M $NaNO_3$ for Cu and Pb, and 2NHCl solution for Sn as eluent.

• Journal of the Korean Chemical Society
• /
• v.13 no.1
• /
• pp.37-40
• /
• 1969

The separation and species of $MoO_4^{--}$ and $WO_4^{--}$ at the various PH value have been studied by the method of cation exchange chromatography. Elution curves of $MoO_4^{--}$ and $WO_4^{--}$ have been made with a 5 cm column of the resin, $Dowe{\times}50W{\times}12$(100-200 mesh), using solutions of various PH value as eluent. Complete separation of $MoO_4^{--}$ and $WO_4^{--}$ was obtained in each PH of 10% EtOH. According to the evaluation of peak position and number of peaks of elution curves, it is likely to exist cationic species of $MoO_4^{--}$.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.11
• /
• pp.2075-2078
• /
• 2007

Oligomerization of isobutene has been investigated using a few solid acid catalysts in order to produce efficiently triisobutenes that are useful chemical feedstocks for heavy alkylates and neo-acids. Several reaction conditions such as space velocity and isobutene concentration are evaluated, and a few cation exchange resins with various acid capacities were compared in the reaction. High trimers selectivity and high conversion can be obtained over a catalyst containing high acid capacity at low space velocity and relatively low isobutene concentration. The stability of a catalyst for the reaction is high when the acid capacity of the catalyst is high (for example Amberlyst-35).

• Journal of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.62-64
• /
• 1964

The cation exchange chromatographic studies for the analysis of transition metals have been described. The quantitative separation of a mixture of Fe(Ⅲ), Cu(II), Zn(II), Ni(II), Cd(II), Co(II) and Mn(II) has been obtained by elution, through a 28cm column of the resin, Dowex 50 ${\times}$ 4 (100∼200 mesh), using 0.45 M $NaNO_3$+0.05 M Na-tartrate solution as eluent, starting with the eluent of pH 3.5, followed stepwise by pH 4.0 and 4.5. A comparison between the calculated and the observed peak positions in the elution curve has been shown. The relative stability constants for tartrate complexes of some transition metals have been calculated by using distribution ratios obtained in this separation procedure.

• Journal of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.117-121
• /
• 1962

The waters throughout Taegu area for 87 points were analysed and according to the analytical data, following unfavorable characteristics for industrial uses were given: (1)Shows strong hardness, (2)Has high ratio of ignition residue to evaporation residue, (3) pH value is over 7, (4) Contains considerable quntities of iron.And then investigated the exchange rate and regeneration level of iron ion using cation exchange resin, Lewatit KS.When the hard water containing 2.2 ppm of iron with 18.4 ppm of calcium and 6.2 ppm of magnesium was passed through the ion exchange resin under $3cc/cm^2/min$ in exhaustant flow rate, exchange rate of iron reached to 42% after 300 hours flow. The exchange efficiency shows abrupt decreasing in initial stage of flow up to 100 hours flow. The exchanger which contains iron was regenerated with 10% sodium hydroxide aqua solution under SV (space velocity) 4. By this method, 57% of iron was eliminated from exchanger while calcium and magnesium are removed as much as 85% and 87% respectively.

• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.479-484
• /
• 2007

In this study, the hybrid ion exchange fibers (HIEF) were prepared by using web spraying muthod with hot melt adhesive. Characteristics of HIEF and their adsorption properties for ammonia gas were investigated. The ion exchange capacity (IEC) of HIEF was increased with increasing the resin contents and their values were higher than those of pure resin and ion exchange fabrics. The removal efficiency for ammonia gas increased with an increase in packing density of hybrid ion exchange fabrics in the column. The adsorption breakthrough time was 270 min, which was slower than those of the resin and fibers. The maximum value of adsorption for ammonia gas was 94%. The breakthrough time was also increased with increasing the concentration and flow rate of ammonia gas. The reaction constant(k) for ammonia gas was increased with increasing the concentration and flow rate of the gas, while it was decreased an the mass was increased.

• Environmental Analysis Health and Toxicology
• /
• v.1 no.1
• /
• pp.77-80
• /
• 1986

Radiochemical synthesis of $N^{G}$-mono［$^{14}$ C-methyl］-L-arginine is described. The compound was synthesized from radio-active mono［$^{14}$ C］-methylamine as easily and purified by strong cation-exchange resin (NH form) liquid chromatography using a gradient of ammonium hydroxide, and crystallized as flavianate. The free amino acid was successfully prepared by strirring its flavianate and strong anion-exchange resin (OH- form), which could remove the flavianic acid from its salt in water below room temperature. Purity of the compound was tested by thin-layer chromatography, thin-layer electro-phoresis, and scintillation spectrometry.y.

• Journal of Pharmaceutical Investigation
• /
• v.8 no.2
• /
• pp.1-10
• /
• 1978

During the course of studies on the production of glutathione from yeast, process development and optimization was carried out. The optimal pH for the extraction of glutathione was found to be 2.5 to 4.0 and the maximum yield for glutathione was obtained when the extraction temperature was 25 to $45^{\circ}C$. The cuprous salt of glutathione was recovered maximally at the range of 2 to 4g of cuprous oxide per 10 Kg of compressed yeast. Further purification was needed for the removal of impurities from glutathione. Cation exchange resin, anion exchange resin and Sephadex G-25 were employed for this purpose. 13 to 15 g of glutathione was obtained from 10 Kg of compressed yeast and the purity was above 99.3%.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.31-36
• /
• 2008

The use of L-carbohydrates and their corresponding nucleosides in medicinal application has greatly increased. For example L-ribose has been much in demand as the starting material for curing hepatitis B. High performance liquid chromatography (HPLC) method was studied for the analysis of ribose and arabinose fractions from ion exchange chromatography (IEC). Dowex Monosphere 99 Ca/320 resin was packed in IEC to separate ribose and arabinose under various operating conditions. $NH_{2}$ and sugar HPLC columns were then used to analyze the fractions from the IEC column. Pulse input method (PIM) was also used to measure adsorption isotherms of ribose and arabinose in the Dowex column and HPLC columns. Experimental results and simulations by ASPEN chromatography were compared with fair agreement.

• Journal of Korean Society of Forest Science
• /
• v.79 no.3
• /
• pp.285-289
• /
• 1990

Soil N mineralization and nitrification can be measured conveniently using mixed bed (cation and anion) exchange resin bags. However, appropriate use of these resin bags requires pretreatment to avoid colorimetric interference and standardize N ion adsorption. Three pretreatments were evaluated : control (untreated), 2 M NaCl with a distilled water rinse, and 4 M NaCl. The 4 M NaCl treatment was effective at removing background levels of $NH_4{^+}$ and $NO_3{^-}$, but adsorbed low amounts (about 40%) of inorganic N from standard solutions. Untreated resin bags adsorbed a constant, higher amount of $NO_3{^-}$ (60%), but did not remove background levels of $NH_4{^+}$. The 2 M NaCl treatment followed by a distilled water rinse performed best : it removed background $NH_4{^+}$ and adsorbed a constant amount of both $NH_4{^+}$ (70%) and $NO_3{^-}$ (60%). Because the ion exchange resin is fairly expensive, we also tested if the resin bags could be reused. Resin bags were either loaded with $NH_4{^+}$ and $NO_3{^-}$ in the laboratory or incubated in soil in the field, desorbed with the 2 M NaCl treatment, and then loaded with standard $NH_4{^+}$ and $NO_3{^-}$ solutions. Lab loaded resin bags adsorbed about 60% of inorganic N then loaded with 2.5 or $5.0mgN\;1^{-1}$ and 70% when loaded at 10 or $20mgN\;1^{-1}$, whereas reused field incubated bags showed the opposite adsorption efficiency. These results demonstrate that resin bags can give reproducible results, but care must be taken to evaluate the effect of pretreatment and potential for reuse.