• 한국재료학회지
• /
• 제27권10호
• /
• pp.530-533
• /
• 2017

ZnO micro/nanocrystals with different morphologies were synthesized by thermal evaporation of various zinc source materials in an air atmosphere. Zinc acetate, zinc carbonate and zinc iodide were used as the source materials. No catalysts or substrates were used in the synthesis of the ZnO crystals. The scanning electron microscope(SEM) image showed that the morphology of ZnO crystals was strongly dependent on the source materials, which suggests that source material is one of the key factors in controlling the morphology of the obtained ZnO crystals. Tetrapods, nanogranular shaped crystals, spherical particles and crayon-shaped crystals were obtained using different source materials. The X-ray diffraction(XRD) pattern revealed that the all the ZnO crystals had hexagonal wurtzite crystalline structures. An ultraviolet emission was observed in the cathodoluminescence spectrum of the ZnO crystals prepared via thermal evaporation of Zn powder. However, a strong green emission centered at around 500 nm was observed in the cathodoluminescence spectra of the ZnO crystals prepared using zinc salts as the source materials.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.546-546
• /
• 2013

Zinc silicate ($Zn_2SiO_4$) has been identified as a suitable host material for a wide variety of luminescent activators, such as transition metal and rare earth elements. In particular, manganese-activated $Zn_2SiO_4$ exhibits highly efficient photoluminescenceand cathodoluminescence, which allows this material to be used in fluorescent lamps and display applications. In this study, we investigated the green and yellow luminescence from Mn-doped $Zn_2SiO_4$ thin films that were synthesized using radio frequency magnetron sputtering followed by annealing at $600{\sim}1,200^{\circ}C$ The refractive index of the $Zn_2SiO_4$: Mn films showed normal dispersion behavior. It was found that the $Zn_2SiO_4$: Mn films annealed at $800^{\circ}C$ ossessed a mixture of alpha and beta phases. The obtained photoluminescence spectrum consisted of two emission bands centered at 525 nm in the green range and 574 nm in the yellow range. The green luminescence originates from the divalent Mn ions in alpha phase of $Zn_2SiO_4$, while the yellow luminescence comes from the divalent Mn ions in beta phase. The films annealed at and above $900^{\circ}C$ xhibited only the alpha phase. The broad PL excitation band was observed ranging from 220 to 300 nm with a maximum at around 243 nm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.375-378
• /
• 2006

Characteristics of doped MgO layer deposited under hydrogen atmosphere were investigated. Hydrogen gas was introduced during e-beam evaporation of doped MgO and its effects on microstructure, cathodoluminescence, discharge voltages and effective yield of secondary electron emission were examined. The results indicated that the hydrogen influences and doped impurities the concentration and energy levels of defects in MgO layer and that affects the luminance efficiency and discharge delays of the panels significantly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.379-382
• /
• 2006

In this study, an attempt was made to form magnesium oxide layer via aqueous solution route of salt precipitation process. A layer with flake morphology was formed from the process and various dopants were added during the forming process. The films formed were characterized using SEM, XRD, and cathodoluminescence measurement. In addition, the discharge characteristics were evaluated using panel tests. The results indicate that MgO film can be formed via the aqueous solution process successfully, of which characteristics are comparable to those of MgO film formed by e-beam evaporation process.

• Journal of Information Display
• /
• 제8권2호
• /
• pp.25-31
• /
• 2007

MgO thick film for ac-PDPs was formed via electrophoresis deposition process and its effect on luminance and luminance efficiency were evaluated. The electrophoresis deposition process of MgO thick film was optimized through parametric study and defects levels in MgO powders was evaluated using cathodoluminescence spectra measurements. The results demonstrate a possibility of using MgO thick film as electron emission layer for ac-PDPs.

• 암석학회지
• /
• 제23권2호
• /
• pp.139-144
• /
• 2014

저어콘 음극선발광영상의 입체적 연구를 위해, 단계적 연마를 사용한 연쇄단층촬영과 영상 후처리작업으로 저어콘 내부 누대구조의 3차원 복원을 최초로 시도하였다. 연구에 사용된 시료는 경상분지 북동부 영덕화강암체에서 분리한 고생대말 시기의 저어콘으로 평면 음극선발광영상에서는 전형적인 진동누대구조가 관찰된다. 시료의 연쇄단층촬영을 위해 에폭시마운트 제작 후 $3{\mu}m$과 $1{\mu}m$ 연마액을 이용한 연마와 후방산란전자영상과 음극선발광영상 촬영을 시료가 소진될 때까지 반복하였다. 단계별 두께의 차이는 약 $3{\mu}m$이며, 약 80여개의 저어콘 중 7개를 선정하여 같은 면적 영상파일로 저장한 후 영상편집 소프트웨어인 Image J와 Volume Viewer를 이용하여 3차원 내부구조를 복원하여, 저어콘의 진동누대 및 덧성장구조를 입체적으로 재현하는데 성공하였다. 3차원적 내부구조 영상은 2차원적으로 관찰하는 단면영상의 내부구조와 달리 특정방향에 따른 단면관찰이 가능하고 다양한 변화양상을 재현할 수 있다. 이 방법은 고분해능 이차이온질량분석기 연대결과가 복잡하게 나오는 저어콘이나 미세구조 파악이 필요한 다른 지질시료의 입체적인 성장 및 재결정작용의 내부 구조연구에 응용될 수 있다.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.187-191
• /
• 2005

A ZnGa$_2$O$_4$ phosphor target was synthesized through solid-state reactions at a calcine temperature of 700 $^{\circ}C$ and sintering temperature of 1300 $^{\circ}C$ in order to deposit ZnGa$_2$O$_4$ phosphor thin film at various temperature using rf magnetron sputtering system. A ZnGa$_2$O$_4$ phosphor thin film was deposited on Si(100) substrate and annealed by a rapid thermal processor(RTP) at 700 $^{\circ}C$, for 15 sec. The x-ray diffraction patterns of ZnGa$_2$O$_4$ phosphor target and thin film showed the main peak (311) direction. ZnGa$_2$O$_4$ thin film has better crystalization due to as function of increasing substrate and annealing temperature. The cathodoluminescence(CL) spectrums of ZnGa$_2$O$_4$ phosphor thin film showed the main peak 420 nm wavelength and the maximum intensity at the substrate temperature of 500 $^{\circ}C$ and annealing temperature of 700 $^{\circ}C$, for 15 sec.

• 한국세라믹학회지
• /
• 제38권9호
• /
• pp.794-798
• /
• 2001

Sol-gel법에 의하여 $Y_{2-x}SiO_5:Ce_x^{3+}$ (x=0.002∼0.04) 형광체를 제조하고 발광특성을 평가하였다. 800$^{\circ}$C에서 하소하였을 때는 무정형의 결정상이 나타났지만 1000$^{\circ}$C 이상에서는 $X_2$ type의 $Y_2SiO_5$ 결정상을 얻었다. 230∼360nm에서 형광체 모체의 광흡수가 일어났으며 300∼400nm에서 Ce 첨가로 인한 형광체의 광흡수가 관찰되었다. 436nm에서 최대의 발광 spectrum을 나타내었으며 $Ce^{3+}$ 함량을 0.025mol 첨가 시 $Y_{2-x}SiO_5:Ce_x^{3+}$ 형광체는 최대의 cathodoluminescence 특성과 CIE1931색 좌표 상에서 x=0.161, y=0.124의 색을 나타내었다.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.275-280
• /
• 2003

Si(III) 표면위에 Gd$_2O_3:Eu^{3+}$ 결정성 형광체 박막을 이온화 집단체 증착방법으로 증착하여 이온선을 주입, 결정을 파괴한 후에 열처리를 통하여 결정구조를 변화시켰다. 초기 생장시의 결정성은 고에너지 전자회절 (RHEED)을 통해 확인하고, X선 회절과 적외선 분광법을 이용하여 시료의 결정구조의 변화를 관측하였다. Near Edge X-ray Absorption Fine Structure (NEXAFS)를 통해 전자구조의 변화를 확인하였다. 이러한 변화들이 발광 특성에 미치는 영향을 Photoluminescence (PL), Cathodoluminescence (CL), 그리고 Vacuum Ultraviolet (VUV) spectrum으로 알아보았다. 본 연구는 결정구조에 의해 변화된 전자구조가 형광체 박막의 발광특성에 미치는 영향을 보고한다.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.13-17
• /
• 2001

The manganese-doped magnesium tin oxide with spinel structure was selected as a green phosphor for FED application and was synthesized by the solid state reaction. Its luminescence properties were investigated under low-voltage electron excitation. The $Mg_2SnO_4$:Mn phosphor showed green emission with the spectrum centered at 500 nm due to energy transfer from $^4T_1$ to $^6A_1$ of $Mn^{2+}$ ion. Optimum Mn concentration was 0.6 mole % and the decay time was shorter than 10 ms.