• 대한전자공학회논문지TE
• /
• 제37권2호
• /
• pp.17-24
• /
• 2000

In this paper, the stress and transient currents associated with the on and off time of applied voltage were used to measure the density and distribution of high voltage stress induced traps in thin silicon oxide films. The transient currents were due to the discharging of traps generated by high stress voltage in the silicon oxides. The trap distributions were relatively uniform new both cathode and anode interface. The trap densities were dependent on the stress polarity. The stress generated trap distributions were relatively uniform the order of 1011~1021[states/eV/cm2] after a stress voltage. It appear that the stress and transient current that flowed when the stress voltage were applied to the oxide was caused by carriers tunneling through the silicon oxide by the high voltage stress generated traps.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.5-8
• /
• 2009

The reliability of multilayer ceramic capacitor with active thin dielectric layer was investigated by highly accelerated life test at various stress condition. The distribution of multilayer ceramic capacitor failure times is plotted as a function of time from Weibull distribution function. According to the test result, voltage acceleration factor is obtained from 2.24 to 2.96. The acceleration by temperature is much higher than other values of active thick dielectric layer. It is clear that median time to failure is affected by the stress voltage for high volumetric efficiency ceramic capacitors with active thin dielectric layer. The degradation under stress of voltage involves electromigration and accumulation of oxygen vacancy at Ni electrode interface of cathode.

• 한국표면공학회지
• /
• 제30권3호
• /
• pp.159-166
• /
• 1997

The metalliding technique was adopted to obtain the diffusion coating of zirconium on AISI 304 Stainless Steel in molten mixed chlorides (32.9wt.%LICl-34.8wt.%NaCl-32.3wt.%). Experiments were carried out in argon gas atmosphere. The electrolytic cell was consisted of a AISI 304 Stainless steel cathode and a consumable zirconium anode. The quality of deposit was analysed by SEM, Optical Microscope, EDS, and also examined by the Micro-Vickers hardness and corrosion tests. Interface of deposit layer was identified as zirconium-iron alloy layer caused by diffusion process at elevated temperatures. The optimum condition for the metalliding was found to be the bath temperature of $550^{\circ}C$, the concentration of $K_2ZrF_6$ ,5wt.%, cathodic current derrent density of 7.0 to 10.0mA/$\textrm{cm}^2$ , and anodic current density of 2.0mA/$\textrm{cm}^2$.

• 전기화학회지
• /
• 제6권3호
• /
• pp.174-177
• /
• 2003

Electric double-layer capacitors based on charge storage at the interface between a high surface area activated carbon electrode and an electrolyte solution are characterized by their long cycle-life and high power density in comparison with batteries. However, energy density of electric double-layer capacitors obtained at present is about 6 Wh/kg at a power density of 500W/kg which is smaller as compared with that of batteries and limits the wide spread use of the capacitors. Therefore, a new capacitor that shows larger energy density than that of electric double-layer capacitors is proposed. The new capacitor is the hybrid capacitor consisting of activated carbon cathode, carbonaceous anode and an organic electrolyte. Maximum voltage applicable to the cell is over 4.2V that is larger than that of the electric double-layer capacitor. As a result, discharged energy density on the basis of stacked volume of electrode, current collector and separator is more than 18Wh/l at a power density of 500W/l.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.453-456
• /
• 2010

Tantalum oxide ($Ta_2O_5$) films are of considerable interest for a range of application, including optical waveguide devices, high temperature resistors, and oxygen sensors. In this paper, we establish an anode oxidation process of tantalum thin film. The voltage drop in the electrolyte is affected not in voltage change but in current change. If the voltage drop in the electrolyte is same with cathode oxidation voltage, the current changes logarithmically in proportion to the voltage drop in interface of tantalum oxide and electrolyte. As a result of the measurement on the electrical property of tantalum oxide thin film, when the thickness of the insulator film is $1500{\AA}$, the breakdown voltage is 350volts and dielectric constant is 29.

• Corrosion Science and Technology
• /
• 제18권6호
• /
• pp.300-311
• /
• 2019

The corrosion behaviors of twinning-induced plasticity (TWIP) steels with different alloying elements (Cu, Al, Si) in a neutral aqueous environment were investigated in terms of the characteristics of the corrosion products formed on the steel surface. The corrosion behavior was evaluated by measuring potentiodynamic polarization test and electrochemical impedance spectroscopy. For compositional analysis of the corrosion products formed on the steel surface, an electron probe x-ray micro analyzer was also utilized. This study showed that the addition of Cu to the steel contributed to the increase in corrosion resistance to a certain extent by the presence of metallic Cu in discontinuous form at the oxide/steel interface. Compared to the case of steel with Cu, the Al-bearing specimen exhibited much higher polarization resistance and lower corrosion current by the formation of a thin Al-enriched oxide layer. On the other hand, Si addition (3.0 wt%) to the steel led to an increase in grain size, which was twice as large as that of the other specimens, resulting in a deterioration of the corrosion resistance. This was closely associated with the localized corrosion attacks along the grain boundaries by the formation of a galvanic couple with a large cathode-small anode.

• 전기화학회지
• /
• 제11권4호
• /
• pp.242-255
• /
• 2008

1991년 lithium-ion battery(LIB)가 상용화된 이후, 초기 전해질은 주로 lithium cobalt oxide($LiCoO_2$) 양극과 graphite 음극의 특성에 집중되어 연구되어 왔다. 또한 전극과 전해질 간의 적합성에 대한 다양한 연구들이 이들 간의 계면에서 활발히 진행되었다. 이후 Si, Sn 등의 비탄소계 음극소재와 3성분(Ni, Mn, Co)계, spinel, olivine 등의 양극 소재를 리튬 2차전지에 채용하려 함에 따라 기존 전해질 재료들도 많은 도전에 직면하게 되었다. 특히, 안전성 문제가 최근 심각하게 부각됨에 따라 전해질의 요구특성은 점점 복잡해지고 까다로워지고 있다. 본 고에서는 이러한 전극소재 변화에 따른 전해질 소재의 다양한 변화와 그 특성에 대하여 구성요소 별로 연구 및 개발 동향을 정리하였다.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.187-190
• /
• 2012

고분자전해질연료전지(PEMFC)에서 음극 공기에 의한 이온오염은 막전극 합체(MEA)의 성능을 심각하게 열화시킨다. 본 연구에서는 산업단지, 길가, 해변의 공기 중 이온 농도를 측정하였다. 이들 지역에서 $Na^+$, $K^+$, $Ca^{2+}$와 $Fe^{3+}$ 이온 농도가 비교적 높았다. 가습수로부터 이들 이온이 cathode에 유입되어 MEA 성능에 미치는 영향에 대해 연구하였다. 수돗물을 가습수로 사용해 170시간 운전한 후 MEA 성능이 초기의 11%로 감소하였다. 이들 오염 이온들이 수소이온보다 전해질 막의 슬폰산기와 친화력이 더 강해 전해질 막에 쉽게 이온 교환된 결과다. MEA 중에서 전극/막 계면에서 이온 오염이 MEA 성능저하에 미치는 영향이 제일 컸다.

• 한국기계가공학회지
• /
• 제20권6호
• /
• pp.100-107
• /
• 2021

As a significant technology in the smartization era promoted by the Fourth Industrial Revolution, the secondary battery industry has recently attracted significant attention. The demand for lithium-ion batteries (LIBs), which exhibit excellent performance, is considerably increasing in different industrial fields. During the manufacturing process of LIBs, it is necessary to join the cathode and anode sheets with thicknesses of several tens of micrometers to lead taps of the cathode and anode with thicknesses of several hundreds of micrometers. Ultrasonic welding exhibits excellent bonding when bonded with very thin plates, such as negative and positive electrodes of LIBs, and dissimilar and highly conductive materials. In addition, ultrasonic welding has a small heat-affected zone. In LIBs, Cu is mainly used as the negative electrode sheet, whereas Cu or Ni is used as the negative electrode tab. In this study, one or two electrode sheets (t0.025 mm Cu) were welded to one lead tab (t0.1 mm Cu). The welding energy and pressure were used as welding parameters to determine the welding strength of the interface between two or three welded materials. Finally, the effects of these welding parameters on the welding strength were investigated.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.194-198
• /
• 2022

All-solid-state thin-film battery can realize the integration of electronic circuits into small devices. However, a high voltage cathode material is required to compensate for the low energy density. Therefore, it is necessary to study all-solid-state thin-film battery based on the high voltage cathode material LNMO. Nevertheless, the electrochemical properties deteriorate due to the problem of the interface between LiNi_0.5Mn_1.5O₄ (LNMO) and the solid electrolyte LiPON. In this study, to solve this problem, amorphous V₂O₅ was deposited as an interlayer between LNMO and LiPON. We confirmed the possibility of improving cycle performance of LNMO based thin-film battery. We expect that the results of this study can extend the battery lifespan of small devices using LNMO based all-solid-state thin-film battery.